Add missing #ifdef CONFIG_PM conditionals around all PM related parts
in libata LLDs.
Signed-off-by: Tejun Heo <htejun at gmail.com>
---
drivers/ata/ahci.c | 14 ++++++++++++++
drivers/ata/ata_generic.c | 4 ++++
drivers/ata/ata_piix.c | 4 ++++
drivers/ata/pata_ali.c | 6 ++++++
drivers/ata/pata_amd.c | 6 ++++++
drivers/ata/pata_atiixp.c | 4 ++++
drivers/ata/pata_cmd64x.c | 6 ++++++
drivers/ata/pata_cs5520.c | 7 +++++++
drivers/ata/pata_cs5530.c | 6 ++++++
drivers/ata/pata_cs5535.c | 4 ++++
drivers/ata/pata_cypress.c | 4 ++++
drivers/ata/pata_efar.c | 4 ++++
drivers/ata/pata_hpt366.c | 7 ++++++-
drivers/ata/pata_hpt3x3.c | 6 ++++++
drivers/ata/pata_it821x.c | 6 ++++++
drivers/ata/pata_jmicron.c | 4 ++++
drivers/ata/pata_marvell.c | 4 ++++
drivers/ata/pata_mpiix.c | 4 ++++
drivers/ata/pata_netcell.c | 4 ++++
drivers/ata/pata_ns87410.c | 4 ++++
drivers/ata/pata_oldpiix.c | 4 ++++
drivers/ata/pata_opti.c | 4 ++++
drivers/ata/pata_optidma.c | 4 ++++
drivers/ata/pata_pdc202xx_old.c | 4 ++++
drivers/ata/pata_radisys.c | 4 ++++
drivers/ata/pata_rz1000.c | 6 ++++++
drivers/ata/pata_sc1200.c | 4 ++++
drivers/ata/pata_serverworks.c | 6 ++++++
drivers/ata/pata_sil680.c | 4 ++++
drivers/ata/pata_sis.c | 4 ++++
drivers/ata/pata_triflex.c | 4 ++++
drivers/ata/pata_via.c | 6 ++++++
drivers/ata/sata_sil.c | 2 ++
drivers/ata/sata_sil24.c | 2 ++
34 files changed, 165 insertions(+), 1 deletion(-)
Index: work1/drivers/ata/ahci.c
===================================================================
--- work1.orig/drivers/ata/ahci.c
+++ work1/drivers/ata/ahci.c
@@ -225,10 +225,12 @@ static void ahci_thaw(struct ata_port *a
static void ahci_error_handler(struct ata_port *ap);
static void ahci_vt8251_error_handler(struct ata_port *ap);
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
+#ifdef CONFIG_PM
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
static int ahci_port_resume(struct ata_port *ap);
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int ahci_pci_device_resume(struct pci_dev *pdev);
+#endif
static void ahci_remove_one (struct pci_dev *pdev);
static struct scsi_host_template ahci_sht = {
@@ -248,8 +250,10 @@ static struct scsi_host_template ahci_sh
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
+#endif
};
static const struct ata_port_operations ahci_ops = {
@@ -276,8 +280,10 @@ static const struct ata_port_operations
.error_handler = ahci_error_handler,
.post_internal_cmd = ahci_post_internal_cmd,
+#ifdef CONFIG_PM
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
+#endif
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
@@ -307,8 +313,10 @@ static const struct ata_port_operations
.error_handler = ahci_vt8251_error_handler,
.post_internal_cmd = ahci_post_internal_cmd,
+#ifdef CONFIG_PM
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
+#endif
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
@@ -441,8 +449,10 @@ static struct pci_driver ahci_pci_driver
.name = DRV_NAME,
.id_table = ahci_pci_tbl,
.probe = ahci_init_one,
+#ifdef CONFIG_PM
.suspend = ahci_pci_device_suspend,
.resume = ahci_pci_device_resume,
+#endif
.remove = ahci_remove_one,
};
@@ -587,6 +597,7 @@ static void ahci_power_up(void __iomem *
writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
}
+#ifdef CONFIG_PM
static void ahci_power_down(void __iomem *port_mmio, u32 cap)
{
u32 cmd, scontrol;
@@ -604,6 +615,7 @@ static void ahci_power_down(void __iomem
cmd &= ~PORT_CMD_SPIN_UP;
writel(cmd, port_mmio + PORT_CMD);
}
+#endif
static void ahci_init_port(void __iomem *port_mmio, u32 cap,
dma_addr_t cmd_slot_dma, dma_addr_t rx_fis_dma)
@@ -1336,6 +1348,7 @@ static void ahci_post_internal_cmd(struc
}
}
+#ifdef CONFIG_PM
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
@@ -1412,6 +1425,7 @@ static int ahci_pci_device_resume(struct
return 0;
}
+#endif
static int ahci_port_start(struct ata_port *ap)
{
Index: work1/drivers/ata/ata_generic.c
===================================================================
--- work1.orig/drivers/ata/ata_generic.c
+++ work1/drivers/ata/ata_generic.c
@@ -119,8 +119,10 @@ static struct scsi_host_template generic
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations generic_port_ops = {
@@ -230,8 +232,10 @@ static struct pci_driver ata_generic_pci
.id_table = ata_generic,
.probe = ata_generic_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init ata_generic_init(void)
Index: work1/drivers/ata/ata_piix.c
===================================================================
--- work1.orig/drivers/ata/ata_piix.c
+++ work1/drivers/ata/ata_piix.c
@@ -255,8 +255,10 @@ static struct pci_driver piix_pci_driver
.id_table = piix_pci_tbl,
.probe = piix_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static struct scsi_host_template piix_sht = {
@@ -275,8 +277,10 @@ static struct scsi_host_template piix_sh
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static const struct ata_port_operations piix_pata_ops = {
Index: work1/drivers/ata/pata_ali.c
===================================================================
--- work1.orig/drivers/ata/pata_ali.c
+++ work1/drivers/ata/pata_ali.c
@@ -345,8 +345,10 @@ static struct scsi_host_template ali_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
/*
@@ -667,11 +669,13 @@ static int ali_init_one(struct pci_dev *
return ata_pci_init_one(pdev, port_info, 2);
}
+#ifdef CONFIG_PM
static int ali_reinit_one(struct pci_dev *pdev)
{
ali_init_chipset(pdev);
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id ali[] = {
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), },
@@ -685,8 +689,10 @@ static struct pci_driver ali_pci_driver
.id_table = ali,
.probe = ali_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ali_reinit_one,
+#endif
};
static int __init ali_init(void)
Index: work1/drivers/ata/pata_amd.c
===================================================================
--- work1.orig/drivers/ata/pata_amd.c
+++ work1/drivers/ata/pata_amd.c
@@ -334,8 +334,10 @@ static struct scsi_host_template amd_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations amd33_port_ops = {
@@ -663,6 +665,7 @@ static int amd_init_one(struct pci_dev *
return ata_pci_init_one(pdev, port_info, 2);
}
+#ifdef CONFIG_PM
static int amd_reinit_one(struct pci_dev *pdev)
{
if (pdev->vendor == PCI_VENDOR_ID_AMD) {
@@ -679,6 +682,7 @@ static int amd_reinit_one(struct pci_dev
}
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id amd[] = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
@@ -708,8 +712,10 @@ static struct pci_driver amd_pci_driver
.id_table = amd,
.probe = amd_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = amd_reinit_one,
+#endif
};
static int __init amd_init(void)
Index: work1/drivers/ata/pata_atiixp.c
===================================================================
--- work1.orig/drivers/ata/pata_atiixp.c
+++ work1/drivers/ata/pata_atiixp.c
@@ -224,8 +224,10 @@ static struct scsi_host_template atiixp_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations atiixp_port_ops = {
@@ -290,8 +292,10 @@ static struct pci_driver atiixp_pci_driv
.id_table = atiixp,
.probe = atiixp_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.resume = ata_pci_device_resume,
.suspend = ata_pci_device_suspend,
+#endif
};
static int __init atiixp_init(void)
Index: work1/drivers/ata/pata_cmd64x.c
===================================================================
--- work1.orig/drivers/ata/pata_cmd64x.c
+++ work1/drivers/ata/pata_cmd64x.c
@@ -285,8 +285,10 @@ static struct scsi_host_template cmd64x_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations cmd64x_port_ops = {
@@ -479,6 +481,7 @@ static int cmd64x_init_one(struct pci_de
return ata_pci_init_one(pdev, port_info, 2);
}
+#ifdef CONFIG_PM
static int cmd64x_reinit_one(struct pci_dev *pdev)
{
u8 mrdmode;
@@ -492,6 +495,7 @@ static int cmd64x_reinit_one(struct pci_
#endif
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id cmd64x[] = {
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
@@ -507,8 +511,10 @@ static struct pci_driver cmd64x_pci_driv
.id_table = cmd64x,
.probe = cmd64x_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = cmd64x_reinit_one,
+#endif
};
static int __init cmd64x_init(void)
Index: work1/drivers/ata/pata_cs5520.c
===================================================================
--- work1.orig/drivers/ata/pata_cs5520.c
+++ work1/drivers/ata/pata_cs5520.c
@@ -167,8 +167,10 @@ static struct scsi_host_template cs5520_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations cs5520_port_ops = {
@@ -298,6 +300,7 @@ static void __devexit cs5520_remove_one(
dev_set_drvdata(dev, NULL);
}
+#ifdef CONFIG_PM
/**
* cs5520_reinit_one - device resume
* @pdev: PCI device
@@ -314,6 +317,8 @@ static int cs5520_reinit_one(struct pci_
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
return ata_pci_device_resume(pdev);
}
+#endif
+
/* For now keep DMA off. We can set it for all but A rev CS5510 once the
core ATA code can handle it */
@@ -329,8 +334,10 @@ static struct pci_driver cs5520_pci_driv
.id_table = pata_cs5520,
.probe = cs5520_init_one,
.remove = cs5520_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = cs5520_reinit_one,
+#endif
};
static int __init cs5520_init(void)
Index: work1/drivers/ata/pata_cs5530.c
===================================================================
--- work1.orig/drivers/ata/pata_cs5530.c
+++ work1/drivers/ata/pata_cs5530.c
@@ -181,8 +181,10 @@ static struct scsi_host_template cs5530_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations cs5530_port_ops = {
@@ -369,6 +371,7 @@ static int cs5530_init_one(struct pci_de
return ata_pci_init_one(pdev, port_info, 2);
}
+#ifdef CONFIG_PM
static int cs5530_reinit_one(struct pci_dev *pdev)
{
/* If we fail on resume we are doomed */
@@ -376,6 +379,7 @@ static int cs5530_reinit_one(struct pci_
BUG();
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id cs5530[] = {
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), },
@@ -388,8 +392,10 @@ static struct pci_driver cs5530_pci_driv
.id_table = cs5530,
.probe = cs5530_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = cs5530_reinit_one,
+#endif
};
static int __init cs5530_init(void)
Index: work1/drivers/ata/pata_cs5535.c
===================================================================
--- work1.orig/drivers/ata/pata_cs5535.c
+++ work1/drivers/ata/pata_cs5535.c
@@ -185,8 +185,10 @@ static struct scsi_host_template cs5535_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations cs5535_port_ops = {
@@ -270,8 +272,10 @@ static struct pci_driver cs5535_pci_driv
.id_table = cs5535,
.probe = cs5535_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init cs5535_init(void)
Index: work1/drivers/ata/pata_cypress.c
===================================================================
--- work1.orig/drivers/ata/pata_cypress.c
+++ work1/drivers/ata/pata_cypress.c
@@ -136,8 +136,10 @@ static struct scsi_host_template cy82c69
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations cy82c693_port_ops = {
@@ -206,8 +208,10 @@ static struct pci_driver cy82c693_pci_dr
.id_table = cy82c693,
.probe = cy82c693_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init cy82c693_init(void)
Index: work1/drivers/ata/pata_efar.c
===================================================================
--- work1.orig/drivers/ata/pata_efar.c
+++ work1/drivers/ata/pata_efar.c
@@ -234,8 +234,10 @@ static struct scsi_host_template efar_sh
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static const struct ata_port_operations efar_ops = {
@@ -317,8 +319,10 @@ static struct pci_driver efar_pci_driver
.id_table = efar_pci_tbl,
.probe = efar_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init efar_init(void)
Index: work1/drivers/ata/pata_hpt366.c
===================================================================
--- work1.orig/drivers/ata/pata_hpt366.c
+++ work1/drivers/ata/pata_hpt366.c
@@ -338,8 +338,10 @@ static struct scsi_host_template hpt36x_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
/*
@@ -467,12 +469,13 @@ static int hpt36x_init_one(struct pci_de
return ata_pci_init_one(dev, port_info, 2);
}
+#ifdef CONFIG_PM
static int hpt36x_reinit_one(struct pci_dev *dev)
{
hpt36x_init_chipset(dev);
return ata_pci_device_resume(dev);
}
-
+#endif
static const struct pci_device_id hpt36x[] = {
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), },
@@ -484,8 +487,10 @@ static struct pci_driver hpt36x_pci_driv
.id_table = hpt36x,
.probe = hpt36x_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = hpt36x_reinit_one,
+#endif
};
static int __init hpt36x_init(void)
Index: work1/drivers/ata/pata_hpt3x3.c
===================================================================
--- work1.orig/drivers/ata/pata_hpt3x3.c
+++ work1/drivers/ata/pata_hpt3x3.c
@@ -119,8 +119,10 @@ static struct scsi_host_template hpt3x3_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations hpt3x3_port_ops = {
@@ -206,11 +208,13 @@ static int hpt3x3_init_one(struct pci_de
return ata_pci_init_one(dev, port_info, 2);
}
+#ifdef CONFIG_PM
static int hpt3x3_reinit_one(struct pci_dev *dev)
{
hpt3x3_init_chipset(dev);
return ata_pci_device_resume(dev);
}
+#endif
static const struct pci_device_id hpt3x3[] = {
{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), },
@@ -223,8 +227,10 @@ static struct pci_driver hpt3x3_pci_driv
.id_table = hpt3x3,
.probe = hpt3x3_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = hpt3x3_reinit_one,
+#endif
};
static int __init hpt3x3_init(void)
Index: work1/drivers/ata/pata_it821x.c
===================================================================
--- work1.orig/drivers/ata/pata_it821x.c
+++ work1/drivers/ata/pata_it821x.c
@@ -676,8 +676,10 @@ static struct scsi_host_template it821x_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations it821x_smart_port_ops = {
@@ -810,6 +812,7 @@ static int it821x_init_one(struct pci_de
return ata_pci_init_one(pdev, port_info, 2);
}
+#ifdef CONFIG_PM
static int it821x_reinit_one(struct pci_dev *pdev)
{
/* Resume - turn raid back off if need be */
@@ -817,6 +820,7 @@ static int it821x_reinit_one(struct pci_
it821x_disable_raid(pdev);
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id it821x[] = {
{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
@@ -830,8 +834,10 @@ static struct pci_driver it821x_pci_driv
.id_table = it821x,
.probe = it821x_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = it821x_reinit_one,
+#endif
};
static int __init it821x_init(void)
Index: work1/drivers/ata/pata_jmicron.c
===================================================================
--- work1.orig/drivers/ata/pata_jmicron.c
+++ work1/drivers/ata/pata_jmicron.c
@@ -222,6 +222,7 @@ static int jmicron_init_one (struct pci_
return ata_pci_init_one(pdev, port_info, 2);
}
+#ifdef CONFIG_PM
static int jmicron_reinit_one(struct pci_dev *pdev)
{
u32 reg;
@@ -242,6 +243,7 @@ static int jmicron_reinit_one(struct pci
}
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id jmicron_pci_tbl[] = {
{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 361},
@@ -258,8 +260,10 @@ static struct pci_driver jmicron_pci_dri
.id_table = jmicron_pci_tbl,
.probe = jmicron_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = jmicron_reinit_one,
+#endif
};
static int __init jmicron_init(void)
Index: work1/drivers/ata/pata_marvell.c
===================================================================
--- work1.orig/drivers/ata/pata_marvell.c
+++ work1/drivers/ata/pata_marvell.c
@@ -103,8 +103,10 @@ static struct scsi_host_template marvell
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static const struct ata_port_operations marvell_ops = {
@@ -199,8 +201,10 @@ static struct pci_driver marvell_pci_dri
.id_table = marvell_pci_tbl,
.probe = marvell_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init marvell_init(void)
Index: work1/drivers/ata/pata_mpiix.c
===================================================================
--- work1.orig/drivers/ata/pata_mpiix.c
+++ work1/drivers/ata/pata_mpiix.c
@@ -167,8 +167,10 @@ static struct scsi_host_template mpiix_s
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations mpiix_port_ops = {
@@ -287,8 +289,10 @@ static struct pci_driver mpiix_pci_drive
.id_table = mpiix,
.probe = mpiix_init_one,
.remove = mpiix_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init mpiix_init(void)
Index: work1/drivers/ata/pata_netcell.c
===================================================================
--- work1.orig/drivers/ata/pata_netcell.c
+++ work1/drivers/ata/pata_netcell.c
@@ -63,8 +63,10 @@ static struct scsi_host_template netcell
.slave_destroy = ata_scsi_slave_destroy,
/* Use standard CHS mapping rules */
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static const struct ata_port_operations netcell_ops = {
@@ -153,8 +155,10 @@ static struct pci_driver netcell_pci_dri
.id_table = netcell_pci_tbl,
.probe = netcell_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init netcell_init(void)
Index: work1/drivers/ata/pata_ns87410.c
===================================================================
--- work1.orig/drivers/ata/pata_ns87410.c
+++ work1/drivers/ata/pata_ns87410.c
@@ -157,8 +157,10 @@ static struct scsi_host_template ns87410
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations ns87410_port_ops = {
@@ -212,8 +214,10 @@ static struct pci_driver ns87410_pci_dri
.id_table = ns87410,
.probe = ns87410_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init ns87410_init(void)
Index: work1/drivers/ata/pata_oldpiix.c
===================================================================
--- work1.orig/drivers/ata/pata_oldpiix.c
+++ work1/drivers/ata/pata_oldpiix.c
@@ -232,8 +232,10 @@ static struct scsi_host_template oldpiix
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static const struct ata_port_operations oldpiix_pata_ops = {
@@ -315,8 +317,10 @@ static struct pci_driver oldpiix_pci_dri
.id_table = oldpiix_pci_tbl,
.probe = oldpiix_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init oldpiix_init(void)
Index: work1/drivers/ata/pata_opti.c
===================================================================
--- work1.orig/drivers/ata/pata_opti.c
+++ work1/drivers/ata/pata_opti.c
@@ -179,8 +179,10 @@ static struct scsi_host_template opti_sh
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations opti_port_ops = {
@@ -244,8 +246,10 @@ static struct pci_driver opti_pci_driver
.id_table = opti,
.probe = opti_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init opti_init(void)
Index: work1/drivers/ata/pata_optidma.c
===================================================================
--- work1.orig/drivers/ata/pata_optidma.c
+++ work1/drivers/ata/pata_optidma.c
@@ -360,8 +360,10 @@ static struct scsi_host_template optidma
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations optidma_port_ops = {
@@ -524,8 +526,10 @@ static struct pci_driver optidma_pci_dri
.id_table = optidma,
.probe = optidma_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init optidma_init(void)
Index: work1/drivers/ata/pata_pdc202xx_old.c
===================================================================
--- work1.orig/drivers/ata/pata_pdc202xx_old.c
+++ work1/drivers/ata/pata_pdc202xx_old.c
@@ -270,8 +270,10 @@ static struct scsi_host_template pdc202x
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations pdc2024x_port_ops = {
@@ -402,8 +404,10 @@ static struct pci_driver pdc202xx_pci_dr
.id_table = pdc202xx,
.probe = pdc202xx_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init pdc202xx_init(void)
Index: work1/drivers/ata/pata_radisys.c
===================================================================
--- work1.orig/drivers/ata/pata_radisys.c
+++ work1/drivers/ata/pata_radisys.c
@@ -228,8 +228,10 @@ static struct scsi_host_template radisys
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static const struct ata_port_operations radisys_pata_ops = {
@@ -312,8 +314,10 @@ static struct pci_driver radisys_pci_dri
.id_table = radisys_pci_tbl,
.probe = radisys_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init radisys_init(void)
Index: work1/drivers/ata/pata_rz1000.c
===================================================================
--- work1.orig/drivers/ata/pata_rz1000.c
+++ work1/drivers/ata/pata_rz1000.c
@@ -93,8 +93,10 @@ static struct scsi_host_template rz1000_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations rz1000_port_ops = {
@@ -177,6 +179,7 @@ static int rz1000_init_one (struct pci_d
return -ENODEV;
}
+#ifdef CONFIG_PM
static int rz1000_reinit_one(struct pci_dev *pdev)
{
/* If this fails on resume (which is a "cant happen" case), we
@@ -185,6 +188,7 @@ static int rz1000_reinit_one(struct pci_
panic("rz1000 fifo");
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id pata_rz1000[] = {
{ PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), },
@@ -198,8 +202,10 @@ static struct pci_driver rz1000_pci_driv
.id_table = pata_rz1000,
.probe = rz1000_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = rz1000_reinit_one,
+#endif
};
static int __init rz1000_init(void)
Index: work1/drivers/ata/pata_sc1200.c
===================================================================
--- work1.orig/drivers/ata/pata_sc1200.c
+++ work1/drivers/ata/pata_sc1200.c
@@ -194,8 +194,10 @@ static struct scsi_host_template sc1200_
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations sc1200_port_ops = {
@@ -266,8 +268,10 @@ static struct pci_driver sc1200_pci_driv
.id_table = sc1200,
.probe = sc1200_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init sc1200_init(void)
Index: work1/drivers/ata/pata_serverworks.c
===================================================================
--- work1.orig/drivers/ata/pata_serverworks.c
+++ work1/drivers/ata/pata_serverworks.c
@@ -326,8 +326,10 @@ static struct scsi_host_template serverw
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations serverworks_osb4_port_ops = {
@@ -555,6 +557,7 @@ static int serverworks_init_one(struct p
return ata_pci_init_one(pdev, port_info, ports);
}
+#ifdef CONFIG_PM
static int serverworks_reinit_one(struct pci_dev *pdev)
{
/* Force master latency timer to 64 PCI clocks */
@@ -578,6 +581,7 @@ static int serverworks_reinit_one(struct
}
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id serverworks[] = {
{ PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0},
@@ -594,8 +598,10 @@ static struct pci_driver serverworks_pci
.id_table = serverworks,
.probe = serverworks_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = serverworks_reinit_one,
+#endif
};
static int __init serverworks_init(void)
Index: work1/drivers/ata/pata_sil680.c
===================================================================
--- work1.orig/drivers/ata/pata_sil680.c
+++ work1/drivers/ata/pata_sil680.c
@@ -371,11 +371,13 @@ static int sil680_init_one(struct pci_de
return ata_pci_init_one(pdev, port_info, 2);
}
+#ifdef CONFIG_PM
static int sil680_reinit_one(struct pci_dev *pdev)
{
sil680_init_chip(pdev);
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id sil680[] = {
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), },
@@ -388,8 +390,10 @@ static struct pci_driver sil680_pci_driv
.id_table = sil680,
.probe = sil680_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = sil680_reinit_one,
+#endif
};
static int __init sil680_init(void)
Index: work1/drivers/ata/pata_sis.c
===================================================================
--- work1.orig/drivers/ata/pata_sis.c
+++ work1/drivers/ata/pata_sis.c
@@ -546,8 +546,10 @@ static struct scsi_host_template sis_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static const struct ata_port_operations sis_133_ops = {
@@ -1001,8 +1003,10 @@ static struct pci_driver sis_pci_driver
.id_table = sis_pci_tbl,
.probe = sis_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init sis_init(void)
Index: work1/drivers/ata/pata_triflex.c
===================================================================
--- work1.orig/drivers/ata/pata_triflex.c
+++ work1/drivers/ata/pata_triflex.c
@@ -193,8 +193,10 @@ static struct scsi_host_template triflex
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations triflex_port_ops = {
@@ -260,8 +262,10 @@ static struct pci_driver triflex_pci_dri
.id_table = triflex,
.probe = triflex_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
+#endif
};
static int __init triflex_init(void)
Index: work1/drivers/ata/pata_via.c
===================================================================
--- work1.orig/drivers/ata/pata_via.c
+++ work1/drivers/ata/pata_via.c
@@ -305,8 +305,10 @@ static struct scsi_host_template via_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.resume = ata_scsi_device_resume,
.suspend = ata_scsi_device_suspend,
+#endif
};
static struct ata_port_operations via_port_ops = {
@@ -560,6 +562,7 @@ static int via_init_one(struct pci_dev *
return ata_pci_init_one(pdev, port_info, 2);
}
+#ifdef CONFIG_PM
/**
* via_reinit_one - reinit after resume
* @pdev; PCI device
@@ -592,6 +595,7 @@ static int via_reinit_one(struct pci_dev
}
return ata_pci_device_resume(pdev);
}
+#endif
static const struct pci_device_id via[] = {
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), },
@@ -607,8 +611,10 @@ static struct pci_driver via_pci_driver
.id_table = via,
.probe = via_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = via_reinit_one,
+#endif
};
static int __init via_init(void)
Index: work1/drivers/ata/sata_sil.c
===================================================================
--- work1.orig/drivers/ata/sata_sil.c
+++ work1/drivers/ata/sata_sil.c
@@ -181,8 +181,10 @@ static struct scsi_host_template sil_sht
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
+#endif
};
static const struct ata_port_operations sil_ops = {
Index: work1/drivers/ata/sata_sil24.c
===================================================================
--- work1.orig/drivers/ata/sata_sil24.c
+++ work1/drivers/ata/sata_sil24.c
@@ -386,8 +386,10 @@ static struct scsi_host_template sil24_s
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+#ifdef CONFIG_PM
.suspend = ata_scsi_device_suspend,
.resume = ata_scsi_device_resume,
+#endif
};
static const struct ata_port_operations sil24_ops = {
