[linux-pm] [Suspend-devel] Suspend and wake on lan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday 11 January 2007 11:37, Pavel Machek wrote:
> Hi!
>
> > I'm having some trouble getting wake on lan to work after the computer is
> > suspended.  Wake on Lan works if I shut down the computer normally (i.e.
> > it powers up again when I send the magic packet), but doesn't wake up
> > when I suspend the computer to disk and then send the magic packet.  I
> > ensure that wake on lan is enabled before suspending by running `ethtool
> > -s eth0 wol g`.
> >
> > The computer is an AMD Athlon, using a Gigabyte GA-71X motherboard with
> > VIA KT400 chipset.
> > The on board network chip is a RealTek RTL8139, using the 8139too driver.
> >
> > I've tried the kernel from debian testing (2.6.18) and a hand built
> > 2.6.19.1 kernel, both with the same results.
> >
> > I've tried uswsusp and the in-kernel suspend, again both with the same
> > results.
> >
> > Can you help?
>
> Rmmod 8139 driver before suspend and use shutdown, not platform, mode?
>
> 									Pavel

Thanks, that works now. 

Regards

Rob

-- 
Rob Walker <rob at tenfoot.org.uk>
http://www.tenfoot.org.uk


[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux