-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Tuesday 02 January 2007 02:28, Rafael J. Wysocki wrote:
> Hi,
>
> On Monday, 1 January 2007 20:44, Andrey Borzenkov wrote:
> > In *the same* configuration STD now fails with "Cannot find swap device".
> > The reason is changes in kernel/power/swap.c. In 2.6.19 it did not
> > require valid swsusp_resume_device at all - it took first available swap
> > device and saved image. Later during resume swsusp_resume_device was set
> > either by command line or sysfs and everything worked nicely.
> >
> > Now swsusp_swap_check() unfortunately checks for swsusp_resume_device at
> > *suspend* time:
> >
> > res = swap_type_of(swsusp_resume_device, swsusp_resume_block);
> > if (res < 0)
> > return res;
> >
> > root_swap = res;
> > resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_WRITE);
> > if (IS_ERR(resume_bdev))
> > return PTR_ERR(resume_bdev);
> >
> > but in case of modular driver for swap device this is likely to be
> > undefined. This is as of 2.6.20-rc3.
>
> Actually, if you look at the 2.6.19 code, the call to swap_type_of() is
> there in swsusp_swap_check() too.
>
> The problem is with open_by_devnum(), I think, which obviously cannot
> succeed if swsusp_resume_device is not set. I think we should return
> resume_bdev from swsusp_swap_check() like in the appended patch (untested).
> Pavel?
>
this works, thank you
- -andrey
> > I already have seen these reports.
>
> Yes, me too.
>
> > While 'echo a:b > /sys/power/resume' before
> > suspend is a workaround, this still breaks perfectly valid setup that
> > worked before. Also 'echo a:b > /sys/power/resume' is actually wrong - we
> > are not going to resume at this point; but there is no way to just tell
> > kernel "use this device for next STD" ... also the error message is
> > misleading, it should complaint "no resume device found". Swap is there
> > all right.
>
> Thanks for the report.
>
> Greetings,
> Rafael
>
>
> ---
> include/linux/swap.h | 2 +-
> kernel/power/swap.c | 9 +++++----
> kernel/power/user.c | 7 ++++---
> mm/swapfile.c | 8 +++++++-
> 4 files changed, 17 insertions(+), 9 deletions(-)
>
> Index: linux-2.6.20-rc3/include/linux/swap.h
> ===================================================================
> --- linux-2.6.20-rc3.orig/include/linux/swap.h
> +++ linux-2.6.20-rc3/include/linux/swap.h
> @@ -245,7 +245,7 @@ extern int swap_duplicate(swp_entry_t);
> extern int valid_swaphandles(swp_entry_t, unsigned long *);
> extern void swap_free(swp_entry_t);
> extern void free_swap_and_cache(swp_entry_t);
> -extern int swap_type_of(dev_t, sector_t);
> +extern int swap_type_of(dev_t, sector_t, struct block_device **);
> extern unsigned int count_swap_pages(int, int);
> extern sector_t map_swap_page(struct swap_info_struct *, pgoff_t);
> extern sector_t swapdev_block(int, pgoff_t);
> Index: linux-2.6.20-rc3/kernel/power/swap.c
> ===================================================================
> --- linux-2.6.20-rc3.orig/kernel/power/swap.c
> +++ linux-2.6.20-rc3/kernel/power/swap.c
> @@ -165,14 +165,15 @@ static int swsusp_swap_check(void) /* Th
> {
> int res;
>
> - res = swap_type_of(swsusp_resume_device, swsusp_resume_block);
> + res = swap_type_of(swsusp_resume_device, swsusp_resume_block,
> + &resume_bdev);
> if (res < 0)
> return res;
>
> root_swap = res;
> - resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_WRITE);
> - if (IS_ERR(resume_bdev))
> - return PTR_ERR(resume_bdev);
> + res = blkdev_get(resume_bdev, FMODE_WRITE, O_RDWR);
> + if (res)
> + return res;
>
> res = set_blocksize(resume_bdev, PAGE_SIZE);
> if (res < 0)
> Index: linux-2.6.20-rc3/mm/swapfile.c
> ===================================================================
> --- linux-2.6.20-rc3.orig/mm/swapfile.c
> +++ linux-2.6.20-rc3/mm/swapfile.c
> @@ -434,7 +434,7 @@ void free_swap_and_cache(swp_entry_t ent
> *
> * This is needed for the suspend to disk (aka swsusp).
> */
> -int swap_type_of(dev_t device, sector_t offset)
> +int swap_type_of(dev_t device, sector_t offset, struct block_device
> **bdev_p) {
> struct block_device *bdev = NULL;
> int i;
> @@ -450,6 +450,9 @@ int swap_type_of(dev_t device, sector_t
> continue;
>
> if (!bdev) {
> + if (bdev_p)
> + *bdev_p = sis->bdev;
> +
> spin_unlock(&swap_lock);
> return i;
> }
> @@ -459,6 +462,9 @@ int swap_type_of(dev_t device, sector_t
> se = list_entry(sis->extent_list.next,
> struct swap_extent, list);
> if (se->start_block == offset) {
> + if (bdev_p)
> + *bdev_p = sis->bdev;
> +
> spin_unlock(&swap_lock);
> bdput(bdev);
> return i;
> Index: linux-2.6.20-rc3/kernel/power/user.c
> ===================================================================
> --- linux-2.6.20-rc3.orig/kernel/power/user.c
> +++ linux-2.6.20-rc3/kernel/power/user.c
> @@ -58,7 +58,7 @@ static int snapshot_open(struct inode *i
> memset(&data->handle, 0, sizeof(struct snapshot_handle));
> if ((filp->f_flags & O_ACCMODE) == O_RDONLY) {
> data->swap = swsusp_resume_device ?
> - swap_type_of(swsusp_resume_device, 0) : -1;
> + swap_type_of(swsusp_resume_device, 0, NULL) : -1;
> data->mode = O_RDONLY;
> } else {
> data->swap = -1;
> @@ -327,7 +327,8 @@ static int snapshot_ioctl(struct inode *
> * so we need to recode them
> */
> if (old_decode_dev(arg)) {
> - data->swap = swap_type_of(old_decode_dev(arg), 0);
> + data->swap = swap_type_of(old_decode_dev(arg),
> + 0, NULL);
> if (data->swap < 0)
> error = -ENODEV;
> } else {
> @@ -427,7 +428,7 @@ static int snapshot_ioctl(struct inode *
> swdev = old_decode_dev(swap_area.dev);
> if (swdev) {
> offset = swap_area.offset;
> - data->swap = swap_type_of(swdev, offset);
> + data->swap = swap_type_of(swdev, offset, NULL);
> if (data->swap < 0)
> error = -ENODEV;
> } else {
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
iD8DBQFFmhn/R6LMutpd94wRAs/nAJ4kcMD1KidpfQtTwnxYCQTf/ZNEzwCZATSf
6OFWDF/9sui3vvwmwwe6dos=
=fYE3
-----END PGP SIGNATURE-----
