On Mon, Oct 30, 2006 at 03:56:26PM +0200, Michael S. Tsirkin wrote: > Quoting r. Adrian Bunk <bunk at stusta.de>: > > Subject : T60 stops triggering any ACPI events > > References : http://lkml.org/lkml/2006/10/4/425 > > http://lkml.org/lkml/2006/10/16/262 > > http://bugzilla.kernel.org/show_bug.cgi?id=7408 > > Submitter : "Michael S. Tsirkin" <mst at mellanox.co.il> > > Status : unknown > > OK, I spent half a night with git-bisect, and the patch that triggers this issue > seems to be this: > > commit d7dd8fd9557840162b724a8ac1366dd78a12dff great! I was about bisecting myself this weekend but had to let go in favour of my daughter... thank you for that > I am currently running on 2.6.19-rc3 minus > d7dd8fd9557840162b724a8ac1366dd78a12dff, and in a full day of use I have not applied your patch and compiling... but I can hardly belive something in the block_dev layer can interfere with ACPI to result in the behavieour we experienced > diff --git a/fs/block_dev.c b/fs/block_dev.c > index bc8f27c..b15ad29 100644 > --- a/fs/block_dev.c > +++ b/fs/block_dev.c and it dosen't change anything for me gruss mlo -- Dipl.-Ing. Martin Lorenz They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Benjamin Franklin please encrypt your mail to me GnuPG key-ID: F1AAD37D get it here: http://blackhole.pca.dfn.de:11371/pks/lookup?op=get&search=0xF1AAD37D ICQ UIN: 33588107 -------------- next part -------------- 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 521952 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 521952 [ 0.000000] On node 0 totalpages: 521952 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2285 pages used for memmap [ 0.000000] HighMem zone: 290291 pages, LIFO batch:31 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v002 LENOVO ) @ 0x000f6870 [ 0.000000] ACPI: XSDT (v001 LENOVO TP-7B 0x00001100 LTP 0x00000000) @ 0x7f6e6526 [ 0.000000] ACPI: FADT (v003 LENOVO TP-7B 0x00001100 LNVO 0x00000001) @ 0x7f6e6600 [ 0.000000] ACPI: SSDT (v001 LENOVO TP-7B 0x00001100 MSFT 0x0100000e) @ 0x7f6e67b4 [ 0.000000] ACPI: ECDT (v001 LENOVO TP-7B 0x00001100 LNVO 0x00000001) @ 0x7f6f2d45 [ 0.000000] ACPI: TCPA (v002 LENOVO TP-7B 0x00001100 LNVO 0x00000001) @ 0x7f6f2d97 [ 0.000000] ACPI: MADT (v001 LENOVO TP-7B 0x00001100 LNVO 0x00000001) @ 0x7f6f2dc9 [ 0.000000] ACPI: MCFG (v001 LENOVO TP-7B 0x00001100 LNVO 0x00000001) @ 0x7f6f2e31 [ 0.000000] ACPI: HPET (v001 LENOVO TP-7B 0x00001100 LNVO 0x00000001) @ 0x7f6f2e6f [ 0.000000] ACPI: BOOT (v001 LENOVO TP-7B 0x00001100 LTP 0x00000001) @ 0x7f6f2fd8 [ 0.000000] ACPI: SSDT (v001 LENOVO TP-7B 0x00001100 INTL 0x20050513) @ 0x7f6e5ae1 [ 0.000000] ACPI: SSDT (v001 LENOVO TP-7B 0x00001100 INTL 0x20050513) @ 0x7f6e5909 [ 0.000000] ACPI: DSDT (v001 LENOVO TP-7B 0x00001100 MSFT 0x0100000e) @ 0x00000000 [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:14 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] Detected 1662.624 MHz processor. [ 10.539368] Built 1 zonelists. Total pages: 517875 [ 10.539373] Kernel command line: root=/dev/sda5 ro resume [ 10.539720] mapped APIC to ffffd000 (fee00000) [ 10.539724] mapped IOAPIC to ffffc000 (fec00000) [ 10.539728] Enabling fast FPU save and restore... done. [ 10.539733] Enabling unmasked SIMD FPU exception support... done. [ 10.539737] Initializing CPU#0 [ 10.539818] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 10.541567] Console: colour VGA+ 80x25 [ 10.545995] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.546589] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.688172] Memory: 2065788k/2087808k available (1949k kernel code, 20860k reserved, 775k data, 176k init, 1170304k highmem) [ 10.688330] virtual kernel memory layout: [ 10.688332] fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) [ 10.688334] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.688336] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.688339] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.688341] .init : 0xc0400000 - 0xc042c000 ( 176 kB) [ 10.688343] .data : 0xc02e77a9 - 0xc03a9414 ( 775 kB) [ 10.688346] .text : 0xc0100000 - 0xc02e77a9 (1949 kB) [ 10.689084] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.689471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 10.689749] hpet0: 3 64-bit timers, 14318180 Hz [ 10.690845] Using HPET for base-timer [ 10.750381] Calibrating delay using timer specific routine.. 3328.29 BogoMIPS (lpj=1664148) [ 10.750612] Security Framework v1.0.0 initialized [ 10.750710] Capability LSM initialized [ 10.750819] Mount-cache hash table entries: 512 [ 10.751046] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 10.751058] monitor/mwait feature present. [ 10.751150] using mwait in idle threads. [ 10.751243] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.751392] CPU: L2 cache: 2048K [ 10.751481] CPU: Physical Processor ID: 0 [ 10.751571] CPU: Processor Core ID: 0 [ 10.751661] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 [ 10.751672] Intel machine check architecture supported. [ 10.751771] Intel machine check reporting enabled on CPU#0. [ 10.751869] Compat vDSO mapped to ffffe000. [ 10.751972] Checking 'hlt' instruction... OK. [ 10.755540] SMP alternatives: switching to UP code [ 10.755838] ACPI: Core revision 20060707 [ 10.779647] CPU0: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08 [ 10.779925] SMP alternatives: switching to SMP code [ 10.780081] Booting processor 1/1 eip 3000 [ 10.791299] Initializing CPU#1 [ 10.851566] Calibrating delay using timer specific routine.. 3325.08 BogoMIPS (lpj=1662541) [ 10.851575] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 10.851584] monitor/mwait feature present. [ 10.851589] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.851593] CPU: L2 cache: 2048K [ 10.851596] CPU: Physical Processor ID: 0 [ 10.851599] CPU: Processor Core ID: 1 [ 10.851601] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 [ 10.851610] Intel machine check architecture supported. [ 10.851619] Intel machine check reporting enabled on CPU#1. [ 10.851890] CPU1: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08 [ 10.853013] Total of 2 processors activated (6653.37 BogoMIPS). [ 10.853317] ENABLING IO-APIC IRQs [ 10.853624] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.965046] checking TSC synchronization across 2 CPUs: [ 0.000086] CPU#0 had -172 usecs TSC skew, fixed it up. [ 0.000181] CPU#1 had 172 usecs TSC skew, fixed it up. [ 0.000949] Brought up 2 CPUs [ 0.307634] migration_cost=117 [ 0.308430] NET: Registered protocol family 16 [ 0.308637] ACPI: bus type pci registered [ 0.308735] PCI: Using MMCONFIG [ 0.309658] Setting up standard PCI resources [ 0.328979] ACPI: Interpreter enabled [ 0.329072] ACPI: Using IOAPIC for interrupt routing [ 0.330596] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11) [ 0.332204] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 9 10 11) [ 0.333820] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11) [ 0.335446] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11) [ 0.337062] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.338682] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.340286] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) [ 0.341902] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.343116] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.343214] PCI: Probing PCI hardware (bus 00) [ 0.348387] Boot video device is 0000:00:02.0 [ 0.348988] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.349086] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.349227] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 0.350564] PCI: Transparent bridge - 0000:00:1e.0 [ 0.350806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.358912] ACPI: Power Resource [PUBS] (on) [ 0.361453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.361772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.362089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.362477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.362853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.365662] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.365766] pnp: PnP ACPI init [ 0.372613] pnp: PnP ACPI: found 12 devices [ 0.372737] intel_rng: FWH not detected [ 0.373008] SCSI subsystem initialized [ 0.373188] PCI: Using ACPI for IRQ routing [ 0.373280] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.374947] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [ 0.375046] PCI: Bridge: 0000:00:1c.0 [ 0.375138] IO window: 2000-2fff [ 0.375231] MEM window: ee000000-ee0fffff [ 0.375323] PREFETCH window: disabled. [ 0.375425] PCI: Bridge: 0000:00:1c.1 [ 0.375516] IO window: 3000-4fff [ 0.375609] MEM window: ec000000-edffffff [ 0.375702] PREFETCH window: e4000000-e40fffff [ 0.375798] PCI: Bridge: 0000:00:1c.2 [ 0.375891] IO window: 5000-6fff [ 0.375985] MEM window: e8000000-e9ffffff [ 0.376080] PREFETCH window: e4100000-e41fffff [ 0.376175] PCI: Bridge: 0000:00:1c.3 [ 0.376267] IO window: 7000-8fff [ 0.376370] MEM window: ea000000-ebffffff [ 0.376465] PREFETCH window: e4200000-e42fffff [ 0.376567] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 0.376661] IO window: 00009000-000090ff [ 0.376756] IO window: 00009400-000094ff [ 0.376852] PREFETCH window: e0000000-e1ffffff [ 0.376948] MEM window: e6000000-e7ffffff [ 0.377042] PCI: Bridge: 0000:00:1e.0 [ 0.377135] IO window: 9000-cfff [ 0.377229] MEM window: e4300000-e7ffffff [ 0.377324] PREFETCH window: e0000000-e3ffffff [ 0.377449] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 0.377635] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.377658] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17 [ 0.377843] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.377866] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18 [ 0.378050] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.378072] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 19 [ 0.378257] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.378268] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 0.378374] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.378393] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 0.378579] PCI: Setting latency timer of device 0000:15:00.0 to 64 [ 0.378614] NET: Registered protocol family 2 [ 0.391378] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.391621] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.394548] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.395357] TCP: Hash tables configured (established 262144 bind 65536) [ 0.395453] TCP reno registered [ 0.395768] Simple Boot Flag at 0x35 set to 0x1 [ 0.396509] audit: initializing netlink socket (disabled) [ 0.396620] audit(1162223349.853:1): initialized [ 0.396812] highmem bounce pool size: 64 pages [ 0.397170] io scheduler noop registered [ 0.397313] io scheduler anticipatory registered [ 0.397454] io scheduler deadline registered [ 0.397607] io scheduler cfq registered (default) [ 0.398102] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.398156] assign_interrupt_mode Found MSI capability [ 0.398309] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.398370] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.398428] Allocate Port Service[0000:00:1c.0:pcie03] [ 0.398548] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.398601] assign_interrupt_mode Found MSI capability [ 0.399564] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.399614] Allocate Port Service[0000:00:1c.1:pcie02] [ 0.399661] Allocate Port Service[0000:00:1c.1:pcie03] [ 0.399775] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.399828] assign_interrupt_mode Found MSI capability [ 0.399962] Allocate Port Service[0000:00:1c.2:pcie00] [ 0.400009] Allocate Port Service[0000:00:1c.2:pcie02] [ 0.400061] Allocate Port Service[0000:00:1c.2:pcie03] [ 0.400175] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.400228] assign_interrupt_mode Found MSI capability [ 0.400368] Allocate Port Service[0000:00:1c.3:pcie00] [ 0.400418] Allocate Port Service[0000:00:1c.3:pcie02] [ 0.400465] Allocate Port Service[0000:00:1c.3:pcie03] [ 0.433651] Real Time Clock Driver v1.12ac [ 0.433809] hpet_resources: 0xfed00000 is busy [ 0.433837] Linux agpgart interface v0.101 (c) Dave Jones [ 0.433975] agpgart: Detected an Intel 945GM Chipset. [ 0.435945] agpgart: Detected 7932K stolen memory. [ 0.453538] agpgart: AGP aperture is 256M @ 0xd0000000 [ 0.453679] [drm] Initialized drm 1.0.1 20051102 [ 0.454166] loop: loaded (max 8 devices) [ 0.454264] Intel(R) PRO/1000 Network Driver - version 7.2.9-k2-NAPI [ 0.454358] Copyright (c) 1999-2006 Intel Corporation. [ 0.454526] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 0.454719] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 0.460267] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:16:d3:22:9b:82 [ 0.505134] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 0.505373] netconsole: not configured, aborting [ 0.505579] libata version 2.00 loaded. [ 0.505629] ahci 0000:00:1f.2: version 2.0 [ 0.505647] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20 [ 1.507573] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.507583] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.507722] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.507910] ata1: SATA max UDMA/133 cmd 0xF8824500 ctl 0x0 bmdma 0x0 irq 219 [ 1.508079] ata2: SATA max UDMA/133 cmd 0xF8824580 ctl 0x0 bmdma 0x0 irq 219 [ 1.508251] ata3: SATA max UDMA/133 cmd 0xF8824600 ctl 0x0 bmdma 0x0 irq 219 [ 1.508419] ata4: SATA max UDMA/133 cmd 0xF8824680 ctl 0x0 bmdma 0x0 irq 219 [ 1.508524] scsi0 : ahci [ 1.966832] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.967289] ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 31/32) [ 1.967424] ata1.00: ata1: dev 0 multi count 16 [ 1.969850] ata1.00: configured for UDMA/100 [ 1.969952] scsi1 : ahci [ 2.273333] ata2: SATA link down (SStatus 0 SControl 0) [ 2.273440] scsi2 : ahci [ 2.576850] ata3: SATA link down (SStatus 0 SControl 0) [ 2.576953] scsi3 : ahci [ 2.880368] ata4: SATA link down (SStatus 0 SControl 0) [ 2.880597] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0084 PQ: 0 ANSI: 5 [ 2.880870] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 2.880982] sda: Write Protect is off [ 2.881073] sda: Mode Sense: 00 3a 00 00 [ 2.881099] SCSI device sda: drive cache: write back [ 2.881251] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 2.881362] sda: Write Protect is off [ 2.881453] sda: Mode Sense: 00 3a 00 00 [ 2.881478] SCSI device sda: drive cache: write back [ 2.881575] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 > [ 3.052953] sd 0:0:0:0: Attached scsi disk sda [ 3.053295] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.064269] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.064367] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.064626] mice: PS/2 mouse device common for all mice [ 3.064722] i2c /dev entries driver [ 3.064957] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.065268] hdaps: LENOVO ThinkPad X60 detected, inverting axes [ 3.069987] input: AT Translated Set 2 keyboard as /class/input/input0 [ 3.076297] hdaps: initial mode latch is 0x05 [ 3.076468] hdaps: setting ec_rate=250, filter_order=2 [ 3.076509] hdaps: fake_data_mode set to 0 [ 3.076732] hdaps: device successfully initialized. [ 3.076906] input: hdaps as /class/input/input1 [ 3.076999] hdaps: driver successfully loaded. [ 3.077093] EDAC MC: Ver: 2.0.1 Oct 30 2006 [ 3.077714] thinkpad_ec: thinkpad_ec 0.30 loaded. [ 3.077956] TCP bic registered [ 3.078057] NET: Registered protocol family 1 [ 3.078153] NET: Registered protocol family 17 [ 3.078263] Starting balanced_irq [ 3.078359] Using IPI No-Shortcut mode [ 3.078884] ACPI: (supports S0 S3 S4 S5) [ 3.079246] Time: tsc clocksource has been installed. [ 3.079386] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 3.082224] VFS: Mounted root (ext2 filesystem) readonly. [ 3.082457] Freeing unused kernel memory: 176k freed [ 6.179063] ieee1394: Initialized config rom entry `ip1394' [ 6.181760] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 6.181958] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 6.235209] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[e4301000-e43017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 6.349287] input: PC Speaker as /class/input/input2 [ 6.712159] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 6.712263] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 6.908445] usbcore: registered new interface driver usbfs [ 6.908579] usbcore: registered new interface driver hub [ 6.908711] usbcore: registered new device driver usb [ 7.089196] irda_init() [ 7.089213] NET: Registered protocol family 23 [ 7.146382] USB Universal Host Controller Interface driver v3.0 [ 7.146545] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 7.146745] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 7.146751] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.147058] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 7.147234] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820 [ 7.147488] usb usb1: configuration #1 chosen from 1 choice [ 7.147628] hub 1-0:1.0: USB hub found [ 7.147726] hub 1-0:1.0: 2 ports detected [ 7.198161] sdhci: Secure Digital Host Controller Interface driver, 0.12 [ 7.198263] sdhci: Copyright(c) Pierre Ossman [ 7.248594] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 7.248798] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 7.248804] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.248942] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 7.249108] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001840 [ 7.249338] usb usb2: configuration #1 chosen from 1 choice [ 7.249818] hub 2-0:1.0: USB hub found [ 7.249917] hub 2-0:1.0: 2 ports detected [ 7.351432] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 7.351634] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 7.351640] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.351771] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 7.351940] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001860 [ 7.352165] usb usb3: configuration #1 chosen from 1 choice [ 7.352305] hub 3-0:1.0: USB hub found [ 7.352401] hub 3-0:1.0: 2 ports detected [ 7.453217] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 [ 7.453403] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 7.453408] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 7.453537] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 7.453701] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001880 [ 7.453921] usb usb4: configuration #1 chosen from 1 choice [ 7.454051] hub 4-0:1.0: USB hub found [ 7.454150] hub 4-0:1.0: 2 ports detected [ 7.499170] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae40600192017] [ 7.555770] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 [ 7.555969] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 7.555975] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.556109] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 7.556283] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.556384] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 7.556395] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee444000 [ 7.560381] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.560837] usb usb5: configuration #1 chosen from 1 choice [ 7.560967] hub 5-0:1.0: USB hub found [ 7.561064] hub 5-0:1.0: 8 ports detected [ 7.563438] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) [ 7.637032] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 7.657935] input: TPPS/2 IBM TrackPoint as /class/input/input3 [ 7.661955] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:201c] [ 7.663374] pnp: Device 00:0a activated. [ 7.663471] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 7 ; dma 1. [ 7.663500] nsc-ircc, chip->init [ 7.663605] nsc-ircc, Found chip at base=0x164e [ 7.663738] nsc-ircc, driver loaded (Dag Brattli) [ 7.663925] IrDA: Registered device irda0 [ 7.664080] nsc-ircc, Found dongle: No dongle connected [ 7.664183] nsc_ircc_init_dongle_interface(), No dongle connected [ 7.785417] Yenta: ISA IRQ mask 0x0c38, PCI irq 20 [ 7.785519] Socket status: 30000006 [ 7.785615] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff [ 7.785713] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 7.785812] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 7.786199] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 7.786450] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 8.303763] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 8.465387] usb 4-1: configuration #1 chosen from 1 choice [ 8.550092] Bluetooth: Core ver 2.11 [ 8.550695] NET: Registered protocol family 31 [ 8.550795] Bluetooth: HCI device and connection manager initialized [ 8.550892] Bluetooth: HCI socket layer initialized [ 8.559175] Bluetooth: HCI USB driver ver 2.9 [ 8.677160] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 8.833905] hda_intel: No response from codec, disabling MSI... [ 8.842826] usb 4-2: configuration #1 chosen from 1 choice [ 8.847946] usbcore: registered new interface driver hci_usb [ 9.833318] hda_intel: azx_get_response timeout, switching to polling mode... [ 10.832730] hda_intel: azx_get_response timeout, switching to single_cmd mode... [ 21.618159] sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 18) [ 21.619154] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 21.620362] PCI: Setting latency timer of device 0000:15:00.2 to 64 [ 21.622574] mmc0: SDHCI at 0xe4301800 irq 22 DMA [ 22.346566] Adding 1951856k swap on /dev/sda12. Priority:-1 extents:1 across:1951856k [ 22.347780] Adding 2931820k swap on /dev/sda13. Priority:-2 extents:1 across:2931820k [ 22.692872] Non-volatile memory driver v1.2 [ 22.731265] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 22.731365] ieee1394: sbp2: Try serialize_io=0 for better performance [ 22.764737] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a [ 22.764844] ibm_acpi: http://ibm-acpi.sf.net/ [ 22.785014] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] [ 22.785828] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] [ 22.787166] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 22.787446] ACPI: Processor [CPU0] (supports 8 throttling states) [ 22.788615] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] [ 22.789318] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] [ 22.790705] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 22.790991] ACPI: Processor [CPU1] (supports 8 throttling states) [ 23.002000] Time: hpet clocksource has been installed. [ 23.019000] mmcblk0: mmc0:b368 SD 249856KiB [ 23.019000] mmcblk0: p1 [ 38.427000] ReiserFS: sda14: found reiserfs format "3.6" with standard journal [ 38.427000] ReiserFS: sda14: warning: CONFIG_REISERFS_CHECK is set ON [ 38.427000] ReiserFS: sda14: warning: - it is slow mode for debugging. [ 38.427000] ReiserFS: sda14: using ordered data mode [ 38.450000] ReiserFS: sda14: journal params: device sda14, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.451000] ReiserFS: sda14: checking transaction log (sda14) [ 38.451000] ReiserFS: sda14: journal-1153: found in header: first_unflushed_offset 7418, last_flushed_trans_id 30277 [ 38.453000] ReiserFS: sda14: journal-1206: Starting replay from offset 130043019795706, trans_id 3223281428 [ 38.453000] ReiserFS: sda14: journal-1299: Setting newest_mount_id to 176 [ 38.495000] ReiserFS: sda14: Using r5 hash to sort names [ 38.558000] ReiserFS: sda8: found reiserfs format "3.6" with standard journal [ 38.558000] ReiserFS: sda8: warning: CONFIG_REISERFS_CHECK is set ON [ 38.558000] ReiserFS: sda8: warning: - it is slow mode for debugging. [ 38.558000] ReiserFS: sda8: using ordered data mode [ 38.565000] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.566000] ReiserFS: sda8: checking transaction log (sda8) [ 38.566000] ReiserFS: sda8: journal-1153: found in header: first_unflushed_offset 6697, last_flushed_trans_id 571523 [ 38.574000] ReiserFS: sda8: journal-1206: Starting replay from offset 2454676888885801, trans_id 3223281428 [ 38.574000] ReiserFS: sda8: journal-1299: Setting newest_mount_id to 176 [ 38.617000] ReiserFS: sda8: Using r5 hash to sort names [ 38.687000] ReiserFS: sda11: found reiserfs format "3.6" with standard journal [ 38.688000] ReiserFS: sda11: warning: CONFIG_REISERFS_CHECK is set ON [ 38.688000] ReiserFS: sda11: warning: - it is slow mode for debugging. [ 38.688000] ReiserFS: sda11: using ordered data mode [ 38.715000] ReiserFS: sda11: journal params: device sda11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.716000] ReiserFS: sda11: checking transaction log (sda11) [ 38.716000] ReiserFS: sda11: journal-1153: found in header: first_unflushed_offset 5253, last_flushed_trans_id 20436 [ 38.749000] ReiserFS: sda11: journal-1206: Starting replay from offset 87776246633605, trans_id 3223281428 [ 38.749000] ReiserFS: sda11: journal-1299: Setting newest_mount_id to 176 [ 38.771000] ReiserFS: sda11: Using r5 hash to sort names [ 38.798000] ReiserFS: sda10: found reiserfs format "3.6" with standard journal [ 38.799000] ReiserFS: sda10: warning: CONFIG_REISERFS_CHECK is set ON [ 38.799000] ReiserFS: sda10: warning: - it is slow mode for debugging. [ 38.799000] ReiserFS: sda10: using ordered data mode [ 38.809000] ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.809000] ReiserFS: sda10: checking transaction log (sda10) [ 38.810000] ReiserFS: sda10: journal-1153: found in header: first_unflushed_offset 3806, last_flushed_trans_id 20392 [ 38.820000] ReiserFS: sda10: journal-1206: Starting replay from offset 87587268071134, trans_id 3223281428 [ 38.820000] ReiserFS: sda10: journal-1299: Setting newest_mount_id to 176 [ 38.831000] ReiserFS: sda10: Using r5 hash to sort names [ 38.848000] ReiserFS: sda9: found reiserfs format "3.6" with standard journal [ 38.848000] ReiserFS: sda9: warning: CONFIG_REISERFS_CHECK is set ON [ 38.848000] ReiserFS: sda9: warning: - it is slow mode for debugging. [ 38.849000] ReiserFS: sda9: using ordered data mode [ 38.855000] ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.856000] ReiserFS: sda9: checking transaction log (sda9) [ 38.856000] ReiserFS: sda9: journal-1153: found in header: first_unflushed_offset 6872, last_flushed_trans_id 96225 [ 38.859000] ReiserFS: sda9: journal-1206: Starting replay from offset 413287523031768, trans_id 4155609112 [ 38.859000] ReiserFS: sda9: journal-1299: Setting newest_mount_id to 176 [ 38.871000] ReiserFS: sda9: Using r5 hash to sort names [ 38.898000] ReiserFS: sda7: found reiserfs format "3.6" with standard journal [ 38.898000] ReiserFS: sda7: warning: CONFIG_REISERFS_CHECK is set ON [ 38.899000] ReiserFS: sda7: warning: - it is slow mode for debugging. [ 38.899000] ReiserFS: sda7: using ordered data mode [ 38.903000] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.903000] ReiserFS: sda7: checking transaction log (sda7) [ 38.904000] ReiserFS: sda7: journal-1153: found in header: first_unflushed_offset 5590, last_flushed_trans_id 581233 [ 38.909000] ReiserFS: sda7: journal-1206: Starting replay from offset 2496381021328854, trans_id 24000000 [ 38.910000] ReiserFS: sda7: journal-1299: Setting newest_mount_id to 176 [ 38.953000] ReiserFS: sda7: Using r5 hash to sort names [ 39.014000] ReiserFS: sda6: found reiserfs format "3.6" with standard journal [ 39.015000] ReiserFS: sda6: warning: CONFIG_REISERFS_CHECK is set ON [ 39.015000] ReiserFS: sda6: warning: - it is slow mode for debugging. [ 39.015000] ReiserFS: sda6: using ordered data mode [ 39.052000] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 39.052000] ReiserFS: sda6: checking transaction log (sda6) [ 39.052000] ReiserFS: sda6: journal-1153: found in header: first_unflushed_offset 2919, last_flushed_trans_id 787426 [ 39.078000] ReiserFS: sda6: journal-1206: Starting replay from offset 3381973212990311, trans_id 30000000 [ 39.078000] ReiserFS: sda6: journal-1299: Setting newest_mount_id to 176 [ 39.167000] ReiserFS: sda6: Using r5 hash to sort names [ 39.284000] kjournald starting. Commit interval 5 seconds [ 39.284000] EXT3 FS on mmcblk0p1, internal journal [ 39.284000] EXT3-fs: mounted filesystem with ordered data mode. -------------- next part -------------- IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000) [ 0.000000] Detected 1662.624 MHz processor. [ 10.539368] Built 1 zonelists. Total pages: 517875 [ 10.539373] Kernel command line: root=/dev/sda5 ro resume [ 10.539720] mapped APIC to ffffd000 (fee00000) [ 10.539724] mapped IOAPIC to ffffc000 (fec00000) [ 10.539728] Enabling fast FPU save and restore... done. [ 10.539733] Enabling unmasked SIMD FPU exception support... done. [ 10.539737] Initializing CPU#0 [ 10.539818] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 10.541567] Console: colour VGA+ 80x25 [ 10.545995] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.546589] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.688172] Memory: 2065788k/2087808k available (1949k kernel code, 20860k reserved, 775k data, 176k init, 1170304k highmem) [ 10.688330] virtual kernel memory layout: [ 10.688332] fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) [ 10.688334] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.688336] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.688339] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.688341] .init : 0xc0400000 - 0xc042c000 ( 176 kB) [ 10.688343] .data : 0xc02e77a9 - 0xc03a9414 ( 775 kB) [ 10.688346] .text : 0xc0100000 - 0xc02e77a9 (1949 kB) [ 10.689084] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.689471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 10.689749] hpet0: 3 64-bit timers, 14318180 Hz [ 10.690845] Using HPET for base-timer [ 10.750381] Calibrating delay using timer specific routine.. 3328.29 BogoMIPS (lpj=1664148) [ 10.750612] Security Framework v1.0.0 initialized [ 10.750710] Capability LSM initialized [ 10.750819] Mount-cache hash table entries: 512 [ 10.751046] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 10.751058] monitor/mwait feature present. [ 10.751150] using mwait in idle threads. [ 10.751243] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.751392] CPU: L2 cache: 2048K [ 10.751481] CPU: Physical Processor ID: 0 [ 10.751571] CPU: Processor Core ID: 0 [ 10.751661] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 [ 10.751672] Intel machine check architecture supported. [ 10.751771] Intel machine check reporting enabled on CPU#0. [ 10.751869] Compat vDSO mapped to ffffe000. [ 10.751972] Checking 'hlt' instruction... OK. [ 10.755540] SMP alternatives: switching to UP code [ 10.755838] ACPI: Core revision 20060707 [ 10.779647] CPU0: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08 [ 10.779925] SMP alternatives: switching to SMP code [ 10.780081] Booting processor 1/1 eip 3000 [ 10.791299] Initializing CPU#1 [ 10.851566] Calibrating delay using timer specific routine.. 3325.08 BogoMIPS (lpj=1662541) [ 10.851575] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 10.851584] monitor/mwait feature present. [ 10.851589] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.851593] CPU: L2 cache: 2048K [ 10.851596] CPU: Physical Processor ID: 0 [ 10.851599] CPU: Processor Core ID: 1 [ 10.851601] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 [ 10.851610] Intel machine check architecture supported. [ 10.851619] Intel machine check reporting enabled on CPU#1. [ 10.851890] CPU1: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08 [ 10.853013] Total of 2 processors activated (6653.37 BogoMIPS). [ 10.853317] ENABLING IO-APIC IRQs [ 10.853624] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 10.965046] checking TSC synchronization across 2 CPUs: [ 0.000086] CPU#0 had -172 usecs TSC skew, fixed it up. [ 0.000181] CPU#1 had 172 usecs TSC skew, fixed it up. [ 0.000949] Brought up 2 CPUs [ 0.307634] migration_cost=117 [ 0.308430] NET: Registered protocol family 16 [ 0.308637] ACPI: bus type pci registered [ 0.308735] PCI: Using MMCONFIG [ 0.309658] Setting up standard PCI resources [ 0.328979] ACPI: Interpreter enabled [ 0.329072] ACPI: Using IOAPIC for interrupt routing [ 0.330596] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 9 10 11) [ 0.332204] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 9 10 11) [ 0.333820] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11) [ 0.335446] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11) [ 0.337062] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.338682] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) [ 0.340286] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) [ 0.341902] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 0.343116] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.343214] PCI: Probing PCI hardware (bus 00) [ 0.348387] Boot video device is 0000:00:02.0 [ 0.348988] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO [ 0.349086] PCI quirk: region 1180-11bf claimed by ICH6 GPIO [ 0.349227] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 0.350564] PCI: Transparent bridge - 0000:00:1e.0 [ 0.350806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.358912] ACPI: Power Resource [PUBS] (on) [ 0.361453] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] [ 0.361772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.362089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.362477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] [ 0.362853] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.365662] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.365766] pnp: PnP ACPI init [ 0.372613] pnp: PnP ACPI: found 12 devices [ 0.372737] intel_rng: FWH not detected [ 0.373008] SCSI subsystem initialized [ 0.373188] PCI: Using ACPI for IRQ routing [ 0.373280] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.374947] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 [ 0.375046] PCI: Bridge: 0000:00:1c.0 [ 0.375138] IO window: 2000-2fff [ 0.375231] MEM window: ee000000-ee0fffff [ 0.375323] PREFETCH window: disabled. [ 0.375425] PCI: Bridge: 0000:00:1c.1 [ 0.375516] IO window: 3000-4fff [ 0.375609] MEM window: ec000000-edffffff [ 0.375702] PREFETCH window: e4000000-e40fffff [ 0.375798] PCI: Bridge: 0000:00:1c.2 [ 0.375891] IO window: 5000-6fff [ 0.375985] MEM window: e8000000-e9ffffff [ 0.376080] PREFETCH window: e4100000-e41fffff [ 0.376175] PCI: Bridge: 0000:00:1c.3 [ 0.376267] IO window: 7000-8fff [ 0.376370] MEM window: ea000000-ebffffff [ 0.376465] PREFETCH window: e4200000-e42fffff [ 0.376567] PCI: Bus 22, cardbus bridge: 0000:15:00.0 [ 0.376661] IO window: 00009000-000090ff [ 0.376756] IO window: 00009400-000094ff [ 0.376852] PREFETCH window: e0000000-e1ffffff [ 0.376948] MEM window: e6000000-e7ffffff [ 0.377042] PCI: Bridge: 0000:00:1e.0 [ 0.377135] IO window: 9000-cfff [ 0.377229] MEM window: e4300000-e7ffffff [ 0.377324] PREFETCH window: e0000000-e3ffffff [ 0.377449] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16 [ 0.377635] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.377658] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17 [ 0.377843] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.377866] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18 [ 0.378050] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.378072] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 19 [ 0.378257] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.378268] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) [ 0.378374] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.378393] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 0.378579] PCI: Setting latency timer of device 0000:15:00.0 to 64 [ 0.378614] NET: Registered protocol family 2 [ 0.391378] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.391621] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.394548] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.395357] TCP: Hash tables configured (established 262144 bind 65536) [ 0.395453] TCP reno registered [ 0.395768] Simple Boot Flag at 0x35 set to 0x1 [ 0.396509] audit: initializing netlink socket (disabled) [ 0.396620] audit(1162223349.853:1): initialized [ 0.396812] highmem bounce pool size: 64 pages [ 0.397170] io scheduler noop registered [ 0.397313] io scheduler anticipatory registered [ 0.397454] io scheduler deadline registered [ 0.397607] io scheduler cfq registered (default) [ 0.398102] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.398156] assign_interrupt_mode Found MSI capability [ 0.398309] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.398370] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.398428] Allocate Port Service[0000:00:1c.0:pcie03] [ 0.398548] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.398601] assign_interrupt_mode Found MSI capability [ 0.399564] Allocate Port Service[0000:00:1c.1:pcie00] [ 0.399614] Allocate Port Service[0000:00:1c.1:pcie02] [ 0.399661] Allocate Port Service[0000:00:1c.1:pcie03] [ 0.399775] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.399828] assign_interrupt_mode Found MSI capability [ 0.399962] Allocate Port Service[0000:00:1c.2:pcie00] [ 0.400009] Allocate Port Service[0000:00:1c.2:pcie02] [ 0.400061] Allocate Port Service[0000:00:1c.2:pcie03] [ 0.400175] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 0.400228] assign_interrupt_mode Found MSI capability [ 0.400368] Allocate Port Service[0000:00:1c.3:pcie00] [ 0.400418] Allocate Port Service[0000:00:1c.3:pcie02] [ 0.400465] Allocate Port Service[0000:00:1c.3:pcie03] [ 0.433651] Real Time Clock Driver v1.12ac [ 0.433809] hpet_resources: 0xfed00000 is busy [ 0.433837] Linux agpgart interface v0.101 (c) Dave Jones [ 0.433975] agpgart: Detected an Intel 945GM Chipset. [ 0.435945] agpgart: Detected 7932K stolen memory. [ 0.453538] agpgart: AGP aperture is 256M @ 0xd0000000 [ 0.453679] [drm] Initialized drm 1.0.1 20051102 [ 0.454166] loop: loaded (max 8 devices) [ 0.454264] Intel(R) PRO/1000 Network Driver - version 7.2.9-k2-NAPI [ 0.454358] Copyright (c) 1999-2006 Intel Corporation. [ 0.454526] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 0.454719] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 0.460267] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:16:d3:22:9b:82 [ 0.505134] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 0.505373] netconsole: not configured, aborting [ 0.505579] libata version 2.00 loaded. [ 0.505629] ahci 0000:00:1f.2: version 2.0 [ 0.505647] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20 [ 1.507573] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.507583] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.507722] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.507910] ata1: SATA max UDMA/133 cmd 0xF8824500 ctl 0x0 bmdma 0x0 irq 219 [ 1.508079] ata2: SATA max UDMA/133 cmd 0xF8824580 ctl 0x0 bmdma 0x0 irq 219 [ 1.508251] ata3: SATA max UDMA/133 cmd 0xF8824600 ctl 0x0 bmdma 0x0 irq 219 [ 1.508419] ata4: SATA max UDMA/133 cmd 0xF8824680 ctl 0x0 bmdma 0x0 irq 219 [ 1.508524] scsi0 : ahci [ 1.966832] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.967289] ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 31/32) [ 1.967424] ata1.00: ata1: dev 0 multi count 16 [ 1.969850] ata1.00: configured for UDMA/100 [ 1.969952] scsi1 : ahci [ 2.273333] ata2: SATA link down (SStatus 0 SControl 0) [ 2.273440] scsi2 : ahci [ 2.576850] ata3: SATA link down (SStatus 0 SControl 0) [ 2.576953] scsi3 : ahci [ 2.880368] ata4: SATA link down (SStatus 0 SControl 0) [ 2.880597] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0084 PQ: 0 ANSI: 5 [ 2.880870] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 2.880982] sda: Write Protect is off [ 2.881073] sda: Mode Sense: 00 3a 00 00 [ 2.881099] SCSI device sda: drive cache: write back [ 2.881251] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 2.881362] sda: Write Protect is off [ 2.881453] sda: Mode Sense: 00 3a 00 00 [ 2.881478] SCSI device sda: drive cache: write back [ 2.881575] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 > [ 3.052953] sd 0:0:0:0: Attached scsi disk sda [ 3.053295] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.064269] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.064367] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.064626] mice: PS/2 mouse device common for all mice [ 3.064722] i2c /dev entries driver [ 3.064957] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.065268] hdaps: LENOVO ThinkPad X60 detected, inverting axes [ 3.069987] input: AT Translated Set 2 keyboard as /class/input/input0 [ 3.076297] hdaps: initial mode latch is 0x05 [ 3.076468] hdaps: setting ec_rate=250, filter_order=2 [ 3.076509] hdaps: fake_data_mode set to 0 [ 3.076732] hdaps: device successfully initialized. [ 3.076906] input: hdaps as /class/input/input1 [ 3.076999] hdaps: driver successfully loaded. [ 3.077093] EDAC MC: Ver: 2.0.1 Oct 30 2006 [ 3.077714] thinkpad_ec: thinkpad_ec 0.30 loaded. [ 3.077956] TCP bic registered [ 3.078057] NET: Registered protocol family 1 [ 3.078153] NET: Registered protocol family 17 [ 3.078263] Starting balanced_irq [ 3.078359] Using IPI No-Shortcut mode [ 3.078884] ACPI: (supports S0 S3 S4 S5) [ 3.079246] Time: tsc clocksource has been installed. [ 3.079386] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 3.082224] VFS: Mounted root (ext2 filesystem) readonly. [ 3.082457] Freeing unused kernel memory: 176k freed [ 6.179063] ieee1394: Initialized config rom entry `ip1394' [ 6.181760] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 6.181958] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 6.235209] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[e4301000-e43017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 6.349287] input: PC Speaker as /class/input/input2 [ 6.712159] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 6.712263] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 6.908445] usbcore: registered new interface driver usbfs [ 6.908579] usbcore: registered new interface driver hub [ 6.908711] usbcore: registered new device driver usb [ 7.089196] irda_init() [ 7.089213] NET: Registered protocol family 23 [ 7.146382] USB Universal Host Controller Interface driver v3.0 [ 7.146545] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 7.146745] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 7.146751] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.147058] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 7.147234] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820 [ 7.147488] usb usb1: configuration #1 chosen from 1 choice [ 7.147628] hub 1-0:1.0: USB hub found [ 7.147726] hub 1-0:1.0: 2 ports detected [ 7.198161] sdhci: Secure Digital Host Controller Interface driver, 0.12 [ 7.198263] sdhci: Copyright(c) Pierre Ossman [ 7.248594] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 7.248798] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 7.248804] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.248942] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 7.249108] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001840 [ 7.249338] usb usb2: configuration #1 chosen from 1 choice [ 7.249818] hub 2-0:1.0: USB hub found [ 7.249917] hub 2-0:1.0: 2 ports detected [ 7.351432] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 7.351634] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 7.351640] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.351771] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 7.351940] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001860 [ 7.352165] usb usb3: configuration #1 chosen from 1 choice [ 7.352305] hub 3-0:1.0: USB hub found [ 7.352401] hub 3-0:1.0: 2 ports detected [ 7.453217] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 [ 7.453403] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 7.453408] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 7.453537] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 7.453701] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001880 [ 7.453921] usb usb4: configuration #1 chosen from 1 choice [ 7.454051] hub 4-0:1.0: USB hub found [ 7.454150] hub 4-0:1.0: 2 ports detected [ 7.499170] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae40600192017] [ 7.555770] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 [ 7.555969] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 7.555975] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.556109] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 7.556283] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.556384] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 7.556395] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee444000 [ 7.560381] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.560837] usb usb5: configuration #1 chosen from 1 choice [ 7.560967] hub 5-0:1.0: USB hub found [ 7.561064] hub 5-0:1.0: 8 ports detected [ 7.563438] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) [ 7.637032] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 7.657935] input: TPPS/2 IBM TrackPoint as /class/input/input3 [ 7.661955] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:201c] [ 7.663374] pnp: Device 00:0a activated. [ 7.663471] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 7 ; dma 1. [ 7.663500] nsc-ircc, chip->init [ 7.663605] nsc-ircc, Found chip at base=0x164e [ 7.663738] nsc-ircc, driver loaded (Dag Brattli) [ 7.663925] IrDA: Registered device irda0 [ 7.664080] nsc-ircc, Found dongle: No dongle connected [ 7.664183] nsc_ircc_init_dongle_interface(), No dongle connected [ 7.785417] Yenta: ISA IRQ mask 0x0c38, PCI irq 20 [ 7.785519] Socket status: 30000006 [ 7.785615] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff [ 7.785713] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 7.785812] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 7.786199] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 7.786450] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 8.303763] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 8.465387] usb 4-1: configuration #1 chosen from 1 choice [ 8.550092] Bluetooth: Core ver 2.11 [ 8.550695] NET: Registered protocol family 31 [ 8.550795] Bluetooth: HCI device and connection manager initialized [ 8.550892] Bluetooth: HCI socket layer initialized [ 8.559175] Bluetooth: HCI USB driver ver 2.9 [ 8.677160] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 8.833905] hda_intel: No response from codec, disabling MSI... [ 8.842826] usb 4-2: configuration #1 chosen from 1 choice [ 8.847946] usbcore: registered new interface driver hci_usb [ 9.833318] hda_intel: azx_get_response timeout, switching to polling mode... [ 10.832730] hda_intel: azx_get_response timeout, switching to single_cmd mode... [ 21.618159] sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 18) [ 21.619154] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 21.620362] PCI: Setting latency timer of device 0000:15:00.2 to 64 [ 21.622574] mmc0: SDHCI at 0xe4301800 irq 22 DMA [ 22.346566] Adding 1951856k swap on /dev/sda12. Priority:-1 extents:1 across:1951856k [ 22.347780] Adding 2931820k swap on /dev/sda13. Priority:-2 extents:1 across:2931820k [ 22.692872] Non-volatile memory driver v1.2 [ 22.731265] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 22.731365] ieee1394: sbp2: Try serialize_io=0 for better performance [ 22.764737] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a [ 22.764844] ibm_acpi: http://ibm-acpi.sf.net/ [ 22.785014] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] [ 22.785828] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] [ 22.787166] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 22.787446] ACPI: Processor [CPU0] (supports 8 throttling states) [ 22.788615] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] [ 22.789318] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] [ 22.790705] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 22.790991] ACPI: Processor [CPU1] (supports 8 throttling states) [ 23.002000] Time: hpet clocksource has been installed. [ 23.019000] mmcblk0: mmc0:b368 SD 249856KiB [ 23.019000] mmcblk0: p1 [ 38.427000] ReiserFS: sda14: found reiserfs format "3.6" with standard journal [ 38.427000] ReiserFS: sda14: warning: CONFIG_REISERFS_CHECK is set ON [ 38.427000] ReiserFS: sda14: warning: - it is slow mode for debugging. [ 38.427000] ReiserFS: sda14: using ordered data mode [ 38.450000] ReiserFS: sda14: journal params: device sda14, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.451000] ReiserFS: sda14: checking transaction log (sda14) [ 38.451000] ReiserFS: sda14: journal-1153: found in header: first_unflushed_offset 7418, last_flushed_trans_id 30277 [ 38.453000] ReiserFS: sda14: journal-1206: Starting replay from offset 130043019795706, trans_id 3223281428 [ 38.453000] ReiserFS: sda14: journal-1299: Setting newest_mount_id to 176 [ 38.495000] ReiserFS: sda14: Using r5 hash to sort names [ 38.558000] ReiserFS: sda8: found reiserfs format "3.6" with standard journal [ 38.558000] ReiserFS: sda8: warning: CONFIG_REISERFS_CHECK is set ON [ 38.558000] ReiserFS: sda8: warning: - it is slow mode for debugging. [ 38.558000] ReiserFS: sda8: using ordered data mode [ 38.565000] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.566000] ReiserFS: sda8: checking transaction log (sda8) [ 38.566000] ReiserFS: sda8: journal-1153: found in header: first_unflushed_offset 6697, last_flushed_trans_id 571523 [ 38.574000] ReiserFS: sda8: journal-1206: Starting replay from offset 2454676888885801, trans_id 3223281428 [ 38.574000] ReiserFS: sda8: journal-1299: Setting newest_mount_id to 176 [ 38.617000] ReiserFS: sda8: Using r5 hash to sort names [ 38.687000] ReiserFS: sda11: found reiserfs format "3.6" with standard journal [ 38.688000] ReiserFS: sda11: warning: CONFIG_REISERFS_CHECK is set ON [ 38.688000] ReiserFS: sda11: warning: - it is slow mode for debugging. [ 38.688000] ReiserFS: sda11: using ordered data mode [ 38.715000] ReiserFS: sda11: journal params: device sda11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.716000] ReiserFS: sda11: checking transaction log (sda11) [ 38.716000] ReiserFS: sda11: journal-1153: found in header: first_unflushed_offset 5253, last_flushed_trans_id 20436 [ 38.749000] ReiserFS: sda11: journal-1206: Starting replay from offset 87776246633605, trans_id 3223281428 [ 38.749000] ReiserFS: sda11: journal-1299: Setting newest_mount_id to 176 [ 38.771000] ReiserFS: sda11: Using r5 hash to sort names [ 38.798000] ReiserFS: sda10: found reiserfs format "3.6" with standard journal [ 38.799000] ReiserFS: sda10: warning: CONFIG_REISERFS_CHECK is set ON [ 38.799000] ReiserFS: sda10: warning: - it is slow mode for debugging. [ 38.799000] ReiserFS: sda10: using ordered data mode [ 38.809000] ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.809000] ReiserFS: sda10: checking transaction log (sda10) [ 38.810000] ReiserFS: sda10: journal-1153: found in header: first_unflushed_offset 3806, last_flushed_trans_id 20392 [ 38.820000] ReiserFS: sda10: journal-1206: Starting replay from offset 87587268071134, trans_id 3223281428 [ 38.820000] ReiserFS: sda10: journal-1299: Setting newest_mount_id to 176 [ 38.831000] ReiserFS: sda10: Using r5 hash to sort names [ 38.848000] ReiserFS: sda9: found reiserfs format "3.6" with standard journal [ 38.848000] ReiserFS: sda9: warning: CONFIG_REISERFS_CHECK is set ON [ 38.848000] ReiserFS: sda9: warning: - it is slow mode for debugging. [ 38.849000] ReiserFS: sda9: using ordered data mode [ 38.855000] ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.856000] ReiserFS: sda9: checking transaction log (sda9) [ 38.856000] ReiserFS: sda9: journal-1153: found in header: first_unflushed_offset 6872, last_flushed_trans_id 96225 [ 38.859000] ReiserFS: sda9: journal-1206: Starting replay from offset 413287523031768, trans_id 4155609112 [ 38.859000] ReiserFS: sda9: journal-1299: Setting newest_mount_id to 176 [ 38.871000] ReiserFS: sda9: Using r5 hash to sort names [ 38.898000] ReiserFS: sda7: found reiserfs format "3.6" with standard journal [ 38.898000] ReiserFS: sda7: warning: CONFIG_REISERFS_CHECK is set ON [ 38.899000] ReiserFS: sda7: warning: - it is slow mode for debugging. [ 38.899000] ReiserFS: sda7: using ordered data mode [ 38.903000] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.903000] ReiserFS: sda7: checking transaction log (sda7) [ 38.904000] ReiserFS: sda7: journal-1153: found in header: first_unflushed_offset 5590, last_flushed_trans_id 581233 [ 38.909000] ReiserFS: sda7: journal-1206: Starting replay from offset 2496381021328854, trans_id 24000000 [ 38.910000] ReiserFS: sda7: journal-1299: Setting newest_mount_id to 176 [ 38.953000] ReiserFS: sda7: Using r5 hash to sort names [ 39.014000] ReiserFS: sda6: found reiserfs format "3.6" with standard journal [ 39.015000] ReiserFS: sda6: warning: CONFIG_REISERFS_CHECK is set ON [ 39.015000] ReiserFS: sda6: warning: - it is slow mode for debugging. [ 39.015000] ReiserFS: sda6: using ordered data mode [ 39.052000] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 39.052000] ReiserFS: sda6: checking transaction log (sda6) [ 39.052000] ReiserFS: sda6: journal-1153: found in header: first_unflushed_offset 2919, last_flushed_trans_id 787426 [ 39.078000] ReiserFS: sda6: journal-1206: Starting replay from offset 3381973212990311, trans_id 30000000 [ 39.078000] ReiserFS: sda6: journal-1299: Setting newest_mount_id to 176 [ 39.167000] ReiserFS: sda6: Using r5 hash to sort names [ 39.284000] kjournald starting. Commit interval 5 seconds [ 39.284000] EXT3 FS on mmcblk0p1, internal journal [ 39.284000] EXT3-fs: mounted filesystem with ordered data mode. [ 51.071000] ACPI: AC Adapter [AC] (off-line) [ 51.096000] ACPI: Battery Slot [BAT0] (battery present) [ 51.111000] ACPI: Power Button (FF) [PWRF] [ 51.111000] ACPI: Lid Switch [LID] [ 51.111000] ACPI: Sleep Button (CM) [SLPB] [ 51.127000] ACPI: ACPI Dock Station Driver [ 51.177000] ACPI: Thermal Zone [THM0] (46 C) [ 51.179000] ACPI: Thermal Zone [THM1] (47 C) [ 51.194000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 51.195000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 64.840000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 65.195000] PCI: Enabling device 0000:00:1b.0 (0100 -> 0102) [ 65.195000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 65.198000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 66.484000] hda_intel: No response from codec, disabling MSI... [ 67.485000] hda_intel: azx_get_response timeout, switching to polling mode... [ 71.911000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 71.912000] [drm] Initialized i915 1.5.0 20060119 on minor 0 [ 155.470000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex [ 155.470000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO [ 155.914000] ACPI: docking [ 156.289000] usb 5-6: new high speed USB device using ehci_hcd and address 4 [ 156.403000] usb 5-6: configuration #1 chosen from 1 choice [ 156.403000] hub 5-6:1.0: USB hub found [ 156.403000] hub 5-6:1.0: 4 ports detected [ 156.682000] usb 5-6.1: new low speed USB device using ehci_hcd and address 5 [ 156.773000] usb 5-6.1: configuration #1 chosen from 1 choice [ 156.951000] usb 5-6.3: new low speed USB device using ehci_hcd and address 6 [ 157.057000] usb 5-6.3: configuration #1 chosen from 1 choice [ 157.202000] usbcore: registered new interface driver hiddev [ 157.204000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input4 [ 157.205000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-6.1 [ 157.212000] input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input5 [ 157.212000] input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.7-6.3 [ 157.223000] input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input6 [ 157.223000] input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.7-6.3 [ 157.223000] usbcore: registered new interface driver usbhid [ 157.223000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver -------------- next part -------------- ded (max 8 devices) [ 0.454264] Intel(R) PRO/1000 Network Driver - version 7.2.9-k2-NAPI [ 0.454358] Copyright (c) 1999-2006 Intel Corporation. [ 0.454526] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 0.454719] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 0.460267] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:32-bit) 00:16:d3:22:9b:82 [ 0.505134] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 0.505373] netconsole: not configured, aborting [ 0.505579] libata version 2.00 loaded. [ 0.505629] ahci 0000:00:1f.2: version 2.0 [ 0.505647] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20 [ 1.507573] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.507583] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode [ 1.507722] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part [ 1.507910] ata1: SATA max UDMA/133 cmd 0xF8824500 ctl 0x0 bmdma 0x0 irq 219 [ 1.508079] ata2: SATA max UDMA/133 cmd 0xF8824580 ctl 0x0 bmdma 0x0 irq 219 [ 1.508251] ata3: SATA max UDMA/133 cmd 0xF8824600 ctl 0x0 bmdma 0x0 irq 219 [ 1.508419] ata4: SATA max UDMA/133 cmd 0xF8824680 ctl 0x0 bmdma 0x0 irq 219 [ 1.508524] scsi0 : ahci [ 1.966832] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.967289] ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 31/32) [ 1.967424] ata1.00: ata1: dev 0 multi count 16 [ 1.969850] ata1.00: configured for UDMA/100 [ 1.969952] scsi1 : ahci [ 2.273333] ata2: SATA link down (SStatus 0 SControl 0) [ 2.273440] scsi2 : ahci [ 2.576850] ata3: SATA link down (SStatus 0 SControl 0) [ 2.576953] scsi3 : ahci [ 2.880368] ata4: SATA link down (SStatus 0 SControl 0) [ 2.880597] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080B 0084 PQ: 0 ANSI: 5 [ 2.880870] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 2.880982] sda: Write Protect is off [ 2.881073] sda: Mode Sense: 00 3a 00 00 [ 2.881099] SCSI device sda: drive cache: write back [ 2.881251] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 2.881362] sda: Write Protect is off [ 2.881453] sda: Mode Sense: 00 3a 00 00 [ 2.881478] SCSI device sda: drive cache: write back [ 2.881575] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 > [ 3.052953] sd 0:0:0:0: Attached scsi disk sda [ 3.053295] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 3.064269] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.064367] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.064626] mice: PS/2 mouse device common for all mice [ 3.064722] i2c /dev entries driver [ 3.064957] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 19 [ 3.065268] hdaps: LENOVO ThinkPad X60 detected, inverting axes [ 3.069987] input: AT Translated Set 2 keyboard as /class/input/input0 [ 3.076297] hdaps: initial mode latch is 0x05 [ 3.076468] hdaps: setting ec_rate=250, filter_order=2 [ 3.076509] hdaps: fake_data_mode set to 0 [ 3.076732] hdaps: device successfully initialized. [ 3.076906] input: hdaps as /class/input/input1 [ 3.076999] hdaps: driver successfully loaded. [ 3.077093] EDAC MC: Ver: 2.0.1 Oct 30 2006 [ 3.077714] thinkpad_ec: thinkpad_ec 0.30 loaded. [ 3.077956] TCP bic registered [ 3.078057] NET: Registered protocol family 1 [ 3.078153] NET: Registered protocol family 17 [ 3.078263] Starting balanced_irq [ 3.078359] Using IPI No-Shortcut mode [ 3.078884] ACPI: (supports S0 S3 S4 S5) [ 3.079246] Time: tsc clocksource has been installed. [ 3.079386] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 3.082224] VFS: Mounted root (ext2 filesystem) readonly. [ 3.082457] Freeing unused kernel memory: 176k freed [ 6.179063] ieee1394: Initialized config rom entry `ip1394' [ 6.181760] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 6.181958] PCI: Setting latency timer of device 0000:15:00.1 to 64 [ 6.235209] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[e4301000-e43017ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 6.349287] input: PC Speaker as /class/input/input2 [ 6.712159] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 6.712263] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 6.908445] usbcore: registered new interface driver usbfs [ 6.908579] usbcore: registered new interface driver hub [ 6.908711] usbcore: registered new device driver usb [ 7.089196] irda_init() [ 7.089213] NET: Registered protocol family 23 [ 7.146382] USB Universal Host Controller Interface driver v3.0 [ 7.146545] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 7.146745] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 7.146751] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.147058] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 7.147234] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820 [ 7.147488] usb usb1: configuration #1 chosen from 1 choice [ 7.147628] hub 1-0:1.0: USB hub found [ 7.147726] hub 1-0:1.0: 2 ports detected [ 7.198161] sdhci: Secure Digital Host Controller Interface driver, 0.12 [ 7.198263] sdhci: Copyright(c) Pierre Ossman [ 7.248594] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 7.248798] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 7.248804] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.248942] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 7.249108] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001840 [ 7.249338] usb usb2: configuration #1 chosen from 1 choice [ 7.249818] hub 2-0:1.0: USB hub found [ 7.249917] hub 2-0:1.0: 2 ports detected [ 7.351432] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 7.351634] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 7.351640] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.351771] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 7.351940] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001860 [ 7.352165] usb usb3: configuration #1 chosen from 1 choice [ 7.352305] hub 3-0:1.0: USB hub found [ 7.352401] hub 3-0:1.0: 2 ports detected [ 7.453217] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 [ 7.453403] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 7.453408] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 7.453537] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 7.453701] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001880 [ 7.453921] usb usb4: configuration #1 chosen from 1 choice [ 7.454051] hub 4-0:1.0: USB hub found [ 7.454150] hub 4-0:1.0: 2 ports detected [ 7.499170] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae40600192017] [ 7.555770] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 [ 7.555969] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 7.555975] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 7.556109] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 7.556283] ehci_hcd 0000:00:1d.7: debug port 1 [ 7.556384] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 7.556395] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee444000 [ 7.560381] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 7.560837] usb usb5: configuration #1 chosen from 1 choice [ 7.560967] hub 5-0:1.0: USB hub found [ 7.561064] hub 5-0:1.0: 8 ports detected [ 7.563438] eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) [ 7.637032] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 7.657935] input: TPPS/2 IBM TrackPoint as /class/input/input3 [ 7.661955] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:201c] [ 7.663374] pnp: Device 00:0a activated. [ 7.663471] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 7 ; dma 1. [ 7.663500] nsc-ircc, chip->init [ 7.663605] nsc-ircc, Found chip at base=0x164e [ 7.663738] nsc-ircc, driver loaded (Dag Brattli) [ 7.663925] IrDA: Registered device irda0 [ 7.664080] nsc-ircc, Found dongle: No dongle connected [ 7.664183] nsc_ircc_init_dongle_interface(), No dongle connected [ 7.785417] Yenta: ISA IRQ mask 0x0c38, PCI irq 20 [ 7.785519] Socket status: 30000006 [ 7.785615] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff [ 7.785713] pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff [ 7.785812] pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff [ 7.786199] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 7.786450] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 8.303763] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 8.465387] usb 4-1: configuration #1 chosen from 1 choice [ 8.550092] Bluetooth: Core ver 2.11 [ 8.550695] NET: Registered protocol family 31 [ 8.550795] Bluetooth: HCI device and connection manager initialized [ 8.550892] Bluetooth: HCI socket layer initialized [ 8.559175] Bluetooth: HCI USB driver ver 2.9 [ 8.677160] usb 4-2: new full speed USB device using uhci_hcd and address 3 [ 8.833905] hda_intel: No response from codec, disabling MSI... [ 8.842826] usb 4-2: configuration #1 chosen from 1 choice [ 8.847946] usbcore: registered new interface driver hci_usb [ 9.833318] hda_intel: azx_get_response timeout, switching to polling mode... [ 10.832730] hda_intel: azx_get_response timeout, switching to single_cmd mode... [ 21.618159] sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 18) [ 21.619154] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 21.620362] PCI: Setting latency timer of device 0000:15:00.2 to 64 [ 21.622574] mmc0: SDHCI at 0xe4301800 irq 22 DMA [ 22.346566] Adding 1951856k swap on /dev/sda12. Priority:-1 extents:1 across:1951856k [ 22.347780] Adding 2931820k swap on /dev/sda13. Priority:-2 extents:1 across:2931820k [ 22.692872] Non-volatile memory driver v1.2 [ 22.731265] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) [ 22.731365] ieee1394: sbp2: Try serialize_io=0 for better performance [ 22.764737] ibm_acpi: IBM ThinkPad ACPI Extras v0.12a [ 22.764844] ibm_acpi: http://ibm-acpi.sf.net/ [ 22.785014] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] [ 22.785828] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] [ 22.787166] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 22.787446] ACPI: Processor [CPU0] (supports 8 throttling states) [ 22.788615] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] [ 22.789318] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] [ 22.790705] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 22.790991] ACPI: Processor [CPU1] (supports 8 throttling states) [ 23.002000] Time: hpet clocksource has been installed. [ 23.019000] mmcblk0: mmc0:b368 SD 249856KiB [ 23.019000] mmcblk0: p1 [ 38.427000] ReiserFS: sda14: found reiserfs format "3.6" with standard journal [ 38.427000] ReiserFS: sda14: warning: CONFIG_REISERFS_CHECK is set ON [ 38.427000] ReiserFS: sda14: warning: - it is slow mode for debugging. [ 38.427000] ReiserFS: sda14: using ordered data mode [ 38.450000] ReiserFS: sda14: journal params: device sda14, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.451000] ReiserFS: sda14: checking transaction log (sda14) [ 38.451000] ReiserFS: sda14: journal-1153: found in header: first_unflushed_offset 7418, last_flushed_trans_id 30277 [ 38.453000] ReiserFS: sda14: journal-1206: Starting replay from offset 130043019795706, trans_id 3223281428 [ 38.453000] ReiserFS: sda14: journal-1299: Setting newest_mount_id to 176 [ 38.495000] ReiserFS: sda14: Using r5 hash to sort names [ 38.558000] ReiserFS: sda8: found reiserfs format "3.6" with standard journal [ 38.558000] ReiserFS: sda8: warning: CONFIG_REISERFS_CHECK is set ON [ 38.558000] ReiserFS: sda8: warning: - it is slow mode for debugging. [ 38.558000] ReiserFS: sda8: using ordered data mode [ 38.565000] ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.566000] ReiserFS: sda8: checking transaction log (sda8) [ 38.566000] ReiserFS: sda8: journal-1153: found in header: first_unflushed_offset 6697, last_flushed_trans_id 571523 [ 38.574000] ReiserFS: sda8: journal-1206: Starting replay from offset 2454676888885801, trans_id 3223281428 [ 38.574000] ReiserFS: sda8: journal-1299: Setting newest_mount_id to 176 [ 38.617000] ReiserFS: sda8: Using r5 hash to sort names [ 38.687000] ReiserFS: sda11: found reiserfs format "3.6" with standard journal [ 38.688000] ReiserFS: sda11: warning: CONFIG_REISERFS_CHECK is set ON [ 38.688000] ReiserFS: sda11: warning: - it is slow mode for debugging. [ 38.688000] ReiserFS: sda11: using ordered data mode [ 38.715000] ReiserFS: sda11: journal params: device sda11, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.716000] ReiserFS: sda11: checking transaction log (sda11) [ 38.716000] ReiserFS: sda11: journal-1153: found in header: first_unflushed_offset 5253, last_flushed_trans_id 20436 [ 38.749000] ReiserFS: sda11: journal-1206: Starting replay from offset 87776246633605, trans_id 3223281428 [ 38.749000] ReiserFS: sda11: journal-1299: Setting newest_mount_id to 176 [ 38.771000] ReiserFS: sda11: Using r5 hash to sort names [ 38.798000] ReiserFS: sda10: found reiserfs format "3.6" with standard journal [ 38.799000] ReiserFS: sda10: warning: CONFIG_REISERFS_CHECK is set ON [ 38.799000] ReiserFS: sda10: warning: - it is slow mode for debugging. [ 38.799000] ReiserFS: sda10: using ordered data mode [ 38.809000] ReiserFS: sda10: journal params: device sda10, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.809000] ReiserFS: sda10: checking transaction log (sda10) [ 38.810000] ReiserFS: sda10: journal-1153: found in header: first_unflushed_offset 3806, last_flushed_trans_id 20392 [ 38.820000] ReiserFS: sda10: journal-1206: Starting replay from offset 87587268071134, trans_id 3223281428 [ 38.820000] ReiserFS: sda10: journal-1299: Setting newest_mount_id to 176 [ 38.831000] ReiserFS: sda10: Using r5 hash to sort names [ 38.848000] ReiserFS: sda9: found reiserfs format "3.6" with standard journal [ 38.848000] ReiserFS: sda9: warning: CONFIG_REISERFS_CHECK is set ON [ 38.848000] ReiserFS: sda9: warning: - it is slow mode for debugging. [ 38.849000] ReiserFS: sda9: using ordered data mode [ 38.855000] ReiserFS: sda9: journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.856000] ReiserFS: sda9: checking transaction log (sda9) [ 38.856000] ReiserFS: sda9: journal-1153: found in header: first_unflushed_offset 6872, last_flushed_trans_id 96225 [ 38.859000] ReiserFS: sda9: journal-1206: Starting replay from offset 413287523031768, trans_id 4155609112 [ 38.859000] ReiserFS: sda9: journal-1299: Setting newest_mount_id to 176 [ 38.871000] ReiserFS: sda9: Using r5 hash to sort names [ 38.898000] ReiserFS: sda7: found reiserfs format "3.6" with standard journal [ 38.898000] ReiserFS: sda7: warning: CONFIG_REISERFS_CHECK is set ON [ 38.899000] ReiserFS: sda7: warning: - it is slow mode for debugging. [ 38.899000] ReiserFS: sda7: using ordered data mode [ 38.903000] ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 38.903000] ReiserFS: sda7: checking transaction log (sda7) [ 38.904000] ReiserFS: sda7: journal-1153: found in header: first_unflushed_offset 5590, last_flushed_trans_id 581233 [ 38.909000] ReiserFS: sda7: journal-1206: Starting replay from offset 2496381021328854, trans_id 24000000 [ 38.910000] ReiserFS: sda7: journal-1299: Setting newest_mount_id to 176 [ 38.953000] ReiserFS: sda7: Using r5 hash to sort names [ 39.014000] ReiserFS: sda6: found reiserfs format "3.6" with standard journal [ 39.015000] ReiserFS: sda6: warning: CONFIG_REISERFS_CHECK is set ON [ 39.015000] ReiserFS: sda6: warning: - it is slow mode for debugging. [ 39.015000] ReiserFS: sda6: using ordered data mode [ 39.052000] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 39.052000] ReiserFS: sda6: checking transaction log (sda6) [ 39.052000] ReiserFS: sda6: journal-1153: found in header: first_unflushed_offset 2919, last_flushed_trans_id 787426 [ 39.078000] ReiserFS: sda6: journal-1206: Starting replay from offset 3381973212990311, trans_id 30000000 [ 39.078000] ReiserFS: sda6: journal-1299: Setting newest_mount_id to 176 [ 39.167000] ReiserFS: sda6: Using r5 hash to sort names [ 39.284000] kjournald starting. Commit interval 5 seconds [ 39.284000] EXT3 FS on mmcblk0p1, internal journal [ 39.284000] EXT3-fs: mounted filesystem with ordered data mode. [ 51.071000] ACPI: AC Adapter [AC] (off-line) [ 51.096000] ACPI: Battery Slot [BAT0] (battery present) [ 51.111000] ACPI: Power Button (FF) [PWRF] [ 51.111000] ACPI: Lid Switch [LID] [ 51.111000] ACPI: Sleep Button (CM) [SLPB] [ 51.127000] ACPI: ACPI Dock Station Driver [ 51.177000] ACPI: Thermal Zone [THM0] (46 C) [ 51.179000] ACPI: Thermal Zone [THM1] (47 C) [ 51.194000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 51.195000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 64.840000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 65.195000] PCI: Enabling device 0000:00:1b.0 (0100 -> 0102) [ 65.195000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 65.198000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 66.484000] hda_intel: No response from codec, disabling MSI... [ 67.485000] hda_intel: azx_get_response timeout, switching to polling mode... [ 71.911000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 71.912000] [drm] Initialized i915 1.5.0 20060119 on minor 0 [ 155.470000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex [ 155.470000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO [ 155.914000] ACPI: docking [ 156.289000] usb 5-6: new high speed USB device using ehci_hcd and address 4 [ 156.403000] usb 5-6: configuration #1 chosen from 1 choice [ 156.403000] hub 5-6:1.0: USB hub found [ 156.403000] hub 5-6:1.0: 4 ports detected [ 156.682000] usb 5-6.1: new low speed USB device using ehci_hcd and address 5 [ 156.773000] usb 5-6.1: configuration #1 chosen from 1 choice [ 156.951000] usb 5-6.3: new low speed USB device using ehci_hcd and address 6 [ 157.057000] usb 5-6.3: configuration #1 chosen from 1 choice [ 157.202000] usbcore: registered new interface driver hiddev [ 157.204000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input4 [ 157.205000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-6.1 [ 157.212000] input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input5 [ 157.212000] input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.7-6.3 [ 157.223000] input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input6 [ 157.223000] input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.7-6.3 [ 157.223000] usbcore: registered new interface driver usbhid [ 157.223000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver [ 579.730000] usb 5-6.2: new high speed USB device using ehci_hcd and address 7 [ 579.815000] usb 5-6.2: configuration #1 chosen from 1 choice [ 579.882000] Initializing USB Mass Storage driver... [ 579.882000] scsi4 : SCSI emulation for USB Mass Storage devices [ 579.882000] usb-storage: device found at 7 [ 579.882000] usb-storage: waiting for device to settle before scanning [ 579.882000] usbcore: registered new interface driver usb-storage [ 579.882000] USB Mass Storage support registered. [ 584.884000] scsi 4:0:0:0: Direct-Access USB 2.0 memory 0.00 PQ: 0 ANSI: 2 [ 584.885000] SCSI device sdb: 1024000 512-byte hdwr sectors (524 MB) [ 584.886000] sdb: Write Protect is off [ 584.886000] sdb: Mode Sense: 00 00 00 00 [ 584.886000] sdb: assuming drive cache: write through [ 584.888000] SCSI device sdb: 1024000 512-byte hdwr sectors (524 MB) [ 584.888000] sdb: Write Protect is off [ 584.888000] sdb: Mode Sense: 00 00 00 00 [ 584.888000] sdb: assuming drive cache: write through [ 584.889000] sdb: sdb1 [ 585.076000] sd 4:0:0:0: Attached scsi removable disk sdb [ 585.077000] usb-storage: device scan complete [ 599.265000] usb 5-6.2: USB disconnect, address 7 [ 702.852000] ACPI: undocking [ 703.083000] usb 5-6: USB disconnect, address 4 [ 703.083000] usb 5-6.1: USB disconnect, address 5 [ 703.083000] usb 5-6.3: USB disconnect, address 6 [ 708.397000] e1000: eth0: e1000_watchdog: NIC Link is Down [ 729.483000] Disabling non-boot CPUs ... [ 729.537000] Breaking affinity for irq 219 [ 729.538000] CPU 1 is now offline [ 729.538000] SMP alternatives: switching to UP code [ 729.547000] CPU1 is down [ 729.547000] Stopping tasks: =========================================================================================================================| [ 730.081000] Suspending console(s) [ 730.081000] usbdev4.3_ep83: PM: suspend 0->2, parent 4-2:1.0 already 2 [ 730.081000] usbdev4.3_ep02: PM: suspend 0->2, parent 4-2:1.0 already 2 [ 730.081000] usbdev4.3_ep81: PM: suspend 0->2, parent 4-2:1.0 already 2 [ 730.081000] usb 4-2:1.0: PM: suspend 2->2, parent 4-2 already 2 [ 730.081000] usbdev4.3_ep00: PM: suspend 0->2, parent 4-2 already 2 [ 730.094000] hdaps: setting ec_rate=0, filter_order=1 [ 731.775000] pnp: Device 00:0a disabled. [ 731.776000] ACPI: PCI interrupt for device 0000:15:00.2 disabled [ 731.798000] ACPI: PCI interrupt for device 0000:15:00.0 disabled [ 731.846000] ACPI: PCI interrupt for device 0000:02:00.0 disabled [ 731.859000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 731.870000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 731.982000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 731.982000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 731.982000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 731.982000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 731.984000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 731.995000] Intel machine check architecture supported. [ 731.995000] Intel machine check reporting enabled on CPU#0. [ 731.995000] Back to C! [ 1633.713000] PM: Writing back config space on device 0000:00:02.1 at offset 1 (was 900000, writing 900003) [ 1633.725000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100100) [ 1633.725000] PCI: Enabling device 0000:00:1b.0 (0100 -> 0102) [ 1633.725000] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 21 [ 1633.725000] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 1633.743000] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) [ 1633.743000] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1633.743000] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) [ 1633.743000] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 1633.743000] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20006050, writing 6050) [ 1633.743000] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) [ 1633.743000] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 1633.743000] PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040b) [ 1633.743000] PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e421e421) [ 1633.743000] PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing ebf0ea00) [ 1633.743000] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 8070) [ 1633.743000] PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010) [ 1633.743000] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100507) [ 1633.743000] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 1633.743000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 1633.743000] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 1633.743000] usb usb1: root hub lost power or was reset [ 1633.743000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 [ 1633.743000] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 1633.743000] usb usb2: root hub lost power or was reset [ 1633.743000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 1633.743000] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 1633.743000] usb usb3: root hub lost power or was reset [ 1633.743000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 [ 1633.743000] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 1633.743000] usb usb4: root hub lost power or was reset [ 1634.104000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 [ 1634.104000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 1634.104000] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100005, writing 100007) [ 1634.104000] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1634.115000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20 [ 1634.115000] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1635.129000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 1635.129000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 1635.172000] PM: Writing back config space on device 0000:15:00.0 at offset 1 (was 2100000, writing 2100007) [ 1635.172000] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20 [ 1635.214000] PM: Writing back config space on device 0000:15:00.1 at offset 4 (was 0, writing e4301000) [ 1635.214000] PM: Writing back config space on device 0000:15:00.1 at offset 3 (was 800000, writing 804000) [ 1635.214000] PM: Writing back config space on device 0000:15:00.1 at offset 1 (was 2100000, writing 2100006) [ 1635.225000] PM: Writing back config space on device 0000:15:00.2 at offset 4 (was 0, writing e4301800) [ 1635.225000] PM: Writing back config space on device 0000:15:00.2 at offset 3 (was 800000, writing 804000) [ 1635.225000] PM: Writing back config space on device 0000:15:00.2 at offset 1 (was 2100000, writing 2100006) [ 1635.225000] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 22 [ 1635.400000] pnp: Device 00:08 does not support activation. [ 1635.400000] pnp: Device 00:09 does not support activation. [ 1635.401000] pnp: Device 00:0a activated. [ 1635.421000] ata2: SATA link down (SStatus 0 SControl 0) [ 1635.421000] ata3: SATA link down (SStatus 0 SControl 0) [ 1635.421000] ata4: SATA link down (SStatus 0 SControl 0) [ 1635.680000] hdaps: initial mode latch is 0x05 [ 1635.680000] hdaps: setting ec_rate=250, filter_order=2 [ 1635.680000] hdaps: fake_data_mode set to 0 [ 1635.821000] nsc_ircc_init_dongle_interface(), No dongle connected [ 1635.821000] nsc_ircc_change_dongle_speed(), No dongle connected is not for IrDA mode [ 1635.821000] usbdev4.2_ep00: PM: resume from 0, parent 4-1 still 2 [ 1635.821000] hci_usb 4-1:1.0: PM: resume from 2, parent 4-1 still 2 [ 1635.821000] usbdev4.2_ep81: PM: resume from 0, parent 4-1:1.0 still 2 [ 1635.821000] usbdev4.2_ep82: PM: resume from 0, parent 4-1:1.0 still 2 [ 1635.821000] usbdev4.2_ep02: PM: resume from 0, parent 4-1:1.0 still 2 [ 1635.821000] hci_usb 4-1:1.1: PM: resume from 2, parent 4-1 still 2 [ 1635.821000] usb 4-1:1.2: PM: resume from 2, parent 4-1 still 2 [ 1635.821000] usbdev4.2_ep84: PM: resume from 0, parent 4-1:1.2 still 2 [ 1635.821000] usbdev4.2_ep04: PM: resume from 0, parent 4-1:1.2 still 2 [ 1635.821000] usb 4-1:1.3: PM: resume from 2, parent 4-1 still 2 [ 1635.821000] usbdev4.3_ep00: PM: resume from 0, parent 4-2 still 2 [ 1635.821000] usbdev4.3_ep81: PM: resume from 0, parent 4-2:1.0 still 2 [ 1635.821000] usbdev4.3_ep02: PM: resume from 0, parent 4-2:1.0 still 2 [ 1635.821000] usbdev4.3_ep83: PM: resume from 0, parent 4-2:1.0 still 2 [ 1635.821000] usbdev4.2_ep83: PM: resume from 0, parent 4-1:1.1 still 2 [ 1635.821000] usbdev4.2_ep03: PM: resume from 0, parent 4-1:1.1 still 2 [ 1635.821000] hci0: PM: resume from 0, parent 4-1:1.0 still 2 [ 1635.822000] Restarting tasks...<6>usb 4-1: USB disconnect, address 2 [ 1635.832000] done [ 1635.832000] Enabling non-boot CPUs ... [ 1635.845000] SMP alternatives: switching to SMP code [ 1635.846000] Booting processor 1/1 eip 3000 [ 1635.856000] Initializing CPU#1 [ 1635.917000] Calibrating delay using timer specific routine.. 3325.06 BogoMIPS (lpj=1662531) [ 1635.917000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000 [ 1635.917000] monitor/mwait feature present. [ 1635.917000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1635.917000] CPU: L2 cache: 2048K [ 1635.917000] CPU: Physical Processor ID: 0 [ 1635.917000] CPU: Processor Core ID: 1 [ 1635.917000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000940 0000c1a9 00000000 00000000 [ 1635.917000] Intel machine check architecture supported. [ 1635.917000] Intel machine check reporting enabled on CPU#1. [ 1635.917000] CPU1: Intel Genuine Intel(R) CPU L2400 @ 1.66GHz stepping 08 [ 1635.996000] usb 4-2: USB disconnect, address 3 [ 1636.202000] usb 4-2: new full speed USB device using uhci_hcd and address 4 [ 1636.365000] usb 4-2: configuration #1 chosen from 1 choice [ 1636.647000] ata1: waiting for device to spin up (7 secs) [ 1636.817000] usb 4-1: new full speed USB device using uhci_hcd and address 5 [ 1636.977000] usb 4-1: configuration #1 chosen from 1 choice [ 1638.293000] CPU1 is up [ 1644.484000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1644.488000] ata1.00: configured for UDMA/100 [ 1644.489000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) [ 1644.489000] sda: Write Protect is off [ 1644.489000] sda: Mode Sense: 00 3a 00 00 [ 1644.489000] SCSI device sda: drive cache: write back [ 1831.582000] thinkpad_ec: thinkpad_ec_request_row: bad end STR3: (0x11:0x00)->0x80 -------------- next part -------------- /proc/acpi/ibm/bay status: not supported ================================================================ /proc/acpi/ibm/beep status: supported commands: <cmd> (<cmd> is 0-17) ================================================================ /proc/acpi/ibm/bluetooth status: enabled commands: enable, disable ================================================================ /proc/acpi/ibm/brightness level: 3 commands: up, down commands: level <level> (<level> is 0-7) ================================================================ /proc/acpi/ibm/cmos status: supported commands: <cmd> (<cmd> is 0-21) ================================================================ /proc/acpi/ibm/driver driver: IBM ThinkPad ACPI Extras version: 0.12a ================================================================ /proc/acpi/ibm/ecdump EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f EC 0x00: *a6 *05 *a0 *01 *fe *96 00 00 *1f *02 *47 00 00 00 *80 00 EC 0x10: 00 00 *ff *ff *f4 *3c *87 *09 *43 *ff *82 *01 *ff *ff *2d 00 EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 00 *85 00 00 *80 EC 0x30: *4a *03 *12 00 *30 *04 00 00 *c5 00 *b0 *10 00 *50 00 00 EC 0x40: 00 00 00 00 00 00 *84 *01 *0a 00 00 00 00 00 00 00 EC 0x50: 00 *c0 *02 *23 *41 00 *33 *2d *03 *2f *2d *06 *21 *23 *30 00 EC 0x60: *80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0x70: 00 00 00 00 00 *12 *30 *40 *2e *2a *80 *2d *21 *80 *1f *80 EC 0x80: 00 00 00 *06 00 00 *03 00 00 00 *0e *78 00 00 00 00 EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0xa0: *11 *0a *74 *0a *62 00 *61 00 *34 *fc *3b *3f *ff *ff *e0 00 EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0xc0: *2b *29 *80 *80 *80 *80 *80 *80 00 00 00 00 00 00 *10 00 EC 0xd0: *06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0xe0: 00 00 00 00 00 00 00 00 *10 *80 *a6 *04 *24 *2e *55 *03 EC 0xf0: *37 *42 *48 *54 *33 *35 *57 *57 *0c *f5 *60 *7c *0c *e7 *63 *93 ================================================================ /proc/acpi/ibm/fan status: enabled speed: 0 commands: enable, disable ================================================================ /proc/acpi/ibm/hotkey status: enabled mask: 0xff9f commands: enable, disable, reset, <mask> ================================================================ /proc/acpi/ibm/led status: supported commands: <led> on, <led> off, <led> blink (<led> is 0-7) ================================================================ /proc/acpi/ibm/light status: off commands: on, off ================================================================ /proc/acpi/ibm/thermal temperatures: 46 42 -128 45 33 -128 31 -128 ================================================================ /proc/acpi/ibm/video status: supported lcd: enabled crt: enabled dvi: disabled auto: enabled commands: lcd_enable, lcd_disable commands: crt_enable, crt_disable commands: dvi_enable, dvi_disable commands: auto_enable, auto_disable commands: video_switch, expand_toggle ================================================================ /proc/acpi/ibm/volume level: 10 mute: on commands: up, down, mute commands: level <level> (<level> is 0-15) ================================================================ /proc/acpi/ibm/wan status: not installed ================================================================ -------------- next part -------------- /proc/acpi/ibm/bay status: not supported ================================================================ /proc/acpi/ibm/beep status: supported commands: <cmd> (<cmd> is 0-17) ================================================================ /proc/acpi/ibm/bluetooth status: enabled commands: enable, disable ================================================================ /proc/acpi/ibm/brightness level: 3 commands: up, down commands: level <level> (<level> is 0-7) ================================================================ /proc/acpi/ibm/cmos status: supported commands: <cmd> (<cmd> is 0-21) ================================================================ /proc/acpi/ibm/driver driver: IBM ThinkPad ACPI Extras version: 0.12a ================================================================ /proc/acpi/ibm/ecdump EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f EC 0x00: *a7 05 a0 01 fe 96 00 00 1f 02 47 00 00 00 80 00 EC 0x10: 00 00 ff ff f4 3c 87 09 43 ff 82 01 ff ff 2d 00 EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 00 85 00 00 80 EC 0x30: 4a 03 *02 00 30 04 *04 00 c5 00 *30 10 *2a 50 00 00 EC 0x40: 00 00 00 00 00 00 84 01 0a 00 00 00 00 00 *04 00 EC 0x50: 00 c0 02 23 41 00 33 2d 03 2f 2d 06 21 23 30 00 EC 0x60: 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0x70: 00 00 00 00 00 12 30 40 *24 *1e 80 *20 *1c 80 *1c 80 EC 0x80: 00 00 00 06 00 00 03 00 00 00 0e 78 00 00 00 00 EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0xa0: *ef *09 74 0a *6e 00 *5f 00 *9e fc *f0 *3e ff ff *c0 00 EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0xc0: *1d *1e 80 80 80 80 80 80 00 00 00 00 00 00 10 00 EC 0xd0: 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0xe0: 00 00 00 00 00 00 00 00 10 80 a6 04 24 2e 55 03 EC 0xf0: 37 42 48 54 33 35 57 57 0c f5 60 7c 0c e7 63 93 ================================================================ /proc/acpi/ibm/fan status: enabled speed: 0 commands: enable, disable ================================================================ /proc/acpi/ibm/hotkey status: enabled mask: 0xff9f commands: enable, disable, reset, <mask> ================================================================ /proc/acpi/ibm/led status: supported commands: <led> on, <led> off, <led> blink (<led> is 0-7) ================================================================ /proc/acpi/ibm/light status: off commands: on, off ================================================================ /proc/acpi/ibm/thermal temperatures: 41 31 -128 37 29 -128 28 -128 ================================================================ /proc/acpi/ibm/video status: supported lcd: enabled crt: enabled dvi: disabled auto: enabled commands: lcd_enable, lcd_disable commands: crt_enable, crt_disable commands: dvi_enable, dvi_disable commands: auto_enable, auto_disable commands: video_switch, expand_toggle ================================================================ /proc/acpi/ibm/volume level: 10 mute: on commands: up, down, mute commands: level <level> (<level> is 0-15) ================================================================ /proc/acpi/ibm/wan status: not installed ================================================================ -------------- next part -------------- /proc/acpi/ibm/bay status: not supported ================================================================ /proc/acpi/ibm/beep status: supported commands: <cmd> (<cmd> is 0-17) ================================================================ /proc/acpi/ibm/bluetooth status: enabled commands: enable, disable ================================================================ /proc/acpi/ibm/brightness level: 3 commands: up, down commands: level <level> (<level> is 0-7) ================================================================ /proc/acpi/ibm/cmos status: supported commands: <cmd> (<cmd> is 0-21) ================================================================ /proc/acpi/ibm/driver driver: IBM ThinkPad ACPI Extras version: 0.12a ================================================================ /proc/acpi/ibm/ecdump EC +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f EC 0x00: a7 05 a0 01 fe 96 00 00 1f 02 47 00 00 00 80 00 EC 0x10: 00 00 ff ff f4 3c 87 09 43 ff 82 01 ff ff 2d 00 EC 0x20: 00 00 00 00 00 00 00 00 00 00 00 00 85 00 00 80 EC 0x30: 4a 03 02 00 30 04 00 00 c5 00 30 10 2a 50 00 00 EC 0x40: 00 00 00 00 00 00 84 01 0a 00 00 00 00 00 00 00 EC 0x50: 00 c0 02 23 41 00 33 2d 03 2f 2d 06 21 23 30 00 EC 0x60: 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0x70: 00 00 00 00 00 12 30 40 *2b *1f 80 *26 1d 80 1c 80 EC 0x80: 00 00 00 06 00 00 03 00 00 00 0e 78 00 00 00 00 EC 0x90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0xa0: *c7 09 74 0a *4d 00 *5e 00 *28 fc *87 3e ff ff c0 00 EC 0xb0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0xc0: *20 *21 80 80 80 80 80 80 00 00 00 00 00 00 10 00 EC 0xd0: 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EC 0xe0: 00 00 00 00 00 00 00 00 10 80 a6 04 24 2e 55 03 EC 0xf0: 37 42 48 54 33 35 57 57 0c f5 60 7c 0c e7 63 93 ================================================================ /proc/acpi/ibm/fan status: enabled speed: 0 commands: enable, disable ================================================================ /proc/acpi/ibm/hotkey status: disabled mask: 0x080c commands: enable, disable, reset, <mask> ================================================================ /proc/acpi/ibm/led status: supported commands: <led> on, <led> off, <led> blink (<led> is 0-7) ================================================================ /proc/acpi/ibm/light status: off commands: on, off ================================================================ /proc/acpi/ibm/thermal temperatures: 45 32 -128 40 29 -128 28 -128 ================================================================ /proc/acpi/ibm/video status: supported lcd: enabled crt: enabled dvi: disabled auto: enabled commands: lcd_enable, lcd_disable commands: crt_enable, crt_disable commands: dvi_enable, dvi_disable commands: auto_enable, auto_disable commands: video_switch, expand_toggle ================================================================ /proc/acpi/ibm/volume level: 10 mute: on commands: up, down, mute commands: level <level> (<level> is 0-15) ================================================================ /proc/acpi/ibm/wan status: not installed ================================================================
