Hi! > > > cat we get contents of /proc/acpi/thermal*/*/* ? > > > > I'm running after a poweroff (left it running over night in the hotel, and > > I'm still in the hotel). > > > > $ grep . /proc/acpi/thermal_zone/THRM/* > > /proc/acpi/thermal_zone/THRM/cooling_mode:<setting not supported> > > /proc/acpi/thermal_zone/THRM/cooling_mode:cooling mode: passive > > /proc/acpi/thermal_zone/THRM/polling_frequency:<polling disabled> > > /proc/acpi/thermal_zone/THRM/state:state: ok > > /proc/acpi/thermal_zone/THRM/temperature:temperature: 48 C > > /proc/acpi/thermal_zone/THRM/trip_points:critical (S5): 88 C > > /proc/acpi/thermal_zone/THRM/trip_points:passive: 81 C: tc1=4 tc2=3 tsp=100 devices=0xcf6c2338 > > > > Note thermal_zone/THRM was finished with bash tab completion so they are > > the only things that match the above glob expr. > > > > Note: I just did a swsusp and resume and here's the same data: > > $ grep . /proc/acpi/thermal_zone/THRM/* > /proc/acpi/thermal_zone/THRM/cooling_mode:<setting not supported> > /proc/acpi/thermal_zone/THRM/cooling_mode:cooling mode: passive > /proc/acpi/thermal_zone/THRM/polling_frequency:<polling disabled> > /proc/acpi/thermal_zone/THRM/state:state: ok > /proc/acpi/thermal_zone/THRM/temperature:temperature: 60 C > /proc/acpi/thermal_zone/THRM/trip_points:critical (S5): 88 C > /proc/acpi/thermal_zone/THRM/trip_points:passive: 81 C: tc1=4 tc2=3 tsp=100 devices=0xcf6c2338 > > > And just leaving my system idle for a few minutes: > > $ grep . /proc/acpi/thermal_zone/THRM/temperature > temperature: 62 C > > and a few more minutes: > > temperature: 64 C > > > And a few more: > > temperature: 66 C > > > right now after typing this: > > temperature: 69 C > > > So this definitely shows somethings not letting the CPU rest. Okay, run top to see what goes on, and look for /proc/acpi/processor/*/* -- you are interested in C states before and after suspend. Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
