From: Sean V Kelley <sean.v.kelley@xxxxxxxxx> Changes since v6 [1]: - Remove unused includes in rcec.c. - Add local variable for dev->rcec_ea. - If no valid capability version then just fill in nextbusn = 0xff. - Leave a blank line after pci_rcec_init(dev). - Reword commit w/ "Attempt to do a function level reset for an RCiEP on fatal error." - Change An RCiEP found on bus in range -> An RCiEP found on a different bus in range - Remove special check on capability version if you fill in nextbusn = 0xff. - Remove blank lines in pcie_link_rcec header. - Fix indentation aer.c. (Jonathan Cameron) - Relocate enabling of PME for RCECs to later RCEC handling additions to PME. - Rename rcec_ext to rcec_ea. - Remove rcec_cap as its use can be handled with rcec_ea. - Add a forward declaration for struct rcec_ea. - Rename pci_bridge_walk() to pci_walk_bridge() to match consistency with other usage. - Separate changes to "reset_subordinate_devices" because it doesn't change the interface. - Separate the use of "type", rename of "dev" to "bridge", the inversion of the condition and use of pci_upstream_bridge() instead of dev->bus->self. - Separate the conditional check (TYPE_ROOT_PORT and TYPE_DOWNSTREAM) for AER resets. - Consider embedding RCiEP's parent RCEC in the rcec_ea struct. However, the issue here is that we don't normally allocate the rcec_ea struct for RCiEPs and the linkage of rcec_ea->rcec is not necessarily more clear. - Provide more comment on the non-native case for clarity. (Bjorn Helgaas) [1] https://lore.kernel.org/linux-pci/20200922213859.108826-1-seanvk.dev@xxxxxxxxxxxxxxxx/ Root Complex Event Collectors (RCEC) provide support for terminating error and PME messages from Root Complex Integrated Endpoints (RCiEPs). An RCEC resides on a Bus in the Root Complex. Multiple RCECs can in fact reside on a single bus. An RCEC will explicitly declare supported RCiEPs through the Root Complex Endpoint Association Extended Capability. (See PCIe 5.0-1, sections 1.3.2.3 (RCiEP), and 7.9.10 (RCEC Ext. Cap.)) The kernel lacks handling for these RCECs and the error messages received from their respective associated RCiEPs. More recently, a new CPU interconnect, Compute eXpress Link (CXL) depends on RCEC capabilities for purposes of error messaging from CXL 1.1 supported RCiEP devices. DocLink: https://www.computeexpresslink.org/ This use case is not limited to CXL. Existing hardware today includes support for RCECs, such as the Denverton microserver product family. Future hardware will be forthcoming. (See Intel Document, Order number: 33061-003US) So services such as AER or PME could be associated with an RCEC driver. In the case of CXL, if an RCiEP (i.e., CXL 1.1 device) is associated with a platform's RCEC it shall signal PME and AER error conditions through that RCEC. Towards the above use cases, add the missing RCEC class and extend the PCIe Root Port and service drivers to allow association of RCiEPs to their respective parent RCEC and facilitate handling of terminating error and PME messages. Jonathan Cameron (1): PCI/AER: Extend AER error handling to RCECs Qiuxu Zhuo (5): PCI/RCEC: Add RCEC class code and extended capability PCI/RCEC: Bind RCEC devices to the Root Port driver PCI/AER: Apply function level reset to RCiEP on fatal error PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR PCI/AER: Add RCEC AER error injection support Sean V Kelley (7): PCI/RCEC: Cache RCEC capabilities in pci_init_capabilities() PCI/ERR: Rename reset_link() to reset_subordinate_device() PCI/ERR: Use "bridge" for clarity in pcie_do_recovery() PCI/ERR: Limit AER resets in pcie_do_recovery() PCI/RCEC: Add pcie_link_rcec() to associate RCiEPs PCI/AER: Add pcie_walk_rcec() to RCEC AER handling PCI/PME: Add pcie_walk_rcec() to RCEC PME handling drivers/pci/pci.h | 25 ++++- drivers/pci/pcie/Makefile | 2 +- drivers/pci/pcie/aer.c | 36 ++++-- drivers/pci/pcie/aer_inject.c | 5 +- drivers/pci/pcie/err.c | 109 +++++++++++++++---- drivers/pci/pcie/pme.c | 15 ++- drivers/pci/pcie/portdrv_core.c | 8 +- drivers/pci/pcie/portdrv_pci.c | 8 +- drivers/pci/pcie/rcec.c | 187 ++++++++++++++++++++++++++++++++ drivers/pci/probe.c | 2 + include/linux/pci.h | 5 + include/linux/pci_ids.h | 1 + include/uapi/linux/pci_regs.h | 7 ++ 13 files changed, 367 insertions(+), 43 deletions(-) create mode 100644 drivers/pci/pcie/rcec.c -- 2.28.0
