Re: [PATCH v3 5/6] iommu/virtio: Support topology description in config space

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Aug 21, 2020 at 03:15:39PM +0200, Jean-Philippe Brucker wrote:
> Platforms without device-tree nor ACPI can provide a topology
> description embedded into the virtio config space. Parse it.
> 
> Use PCI FIXUP to probe the config space early, because we need to
> discover the topology before any DMA configuration takes place, and the
> virtio driver may be loaded much later. Since we discover the topology
> description when probing the PCI hierarchy, the virtual IOMMU cannot
> manage other platform devices discovered earlier.

> +struct viommu_cap_config {
> +	u8 bar;
> +	u32 length; /* structure size */
> +	u32 offset; /* structure offset within the bar */

s/the bar/the BAR/ (to match comment below).

> +static void viommu_pci_parse_topology(struct pci_dev *dev)
> +{
> +	int ret;
> +	u32 features;
> +	void __iomem *regs, *common_regs;
> +	struct viommu_cap_config cap = {0};
> +	struct virtio_pci_common_cfg __iomem *common_cfg;
> +
> +	/*
> +	 * The virtio infrastructure might not be loaded at this point. We need
> +	 * to access the BARs ourselves.
> +	 */
> +	ret = viommu_pci_find_capability(dev, VIRTIO_PCI_CAP_COMMON_CFG, &cap);
> +	if (!ret) {
> +		pci_warn(dev, "common capability not found\n");

Is the lack of this capability really an error, i.e., is this
pci_warn() or pci_info()?  The "device doesn't have topology
description" below is only pci_dbg(), which suggests that we can live
without this.

Maybe a hint about what "common capability" means?

> +		return;
> +	}
> +
> +	if (pci_enable_device_mem(dev))
> +		return;
> +
> +	common_regs = pci_iomap(dev, cap.bar, 0);
> +	if (!common_regs)
> +		return;
> +
> +	common_cfg = common_regs + cap.offset;
> +
> +	/* Perform the init sequence before we can read the config */
> +	ret = viommu_pci_reset(common_cfg);

I guess this is some special device-specific reset, not any kind of
standard PCI reset?

> +	if (ret < 0) {
> +		pci_warn(dev, "unable to reset device\n");
> +		goto out_unmap_common;
> +	}
> +
> +	iowrite8(VIRTIO_CONFIG_S_ACKNOWLEDGE, &common_cfg->device_status);
> +	iowrite8(VIRTIO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER,
> +		 &common_cfg->device_status);
> +
> +	/* Find out if the device supports topology description */
> +	iowrite32(0, &common_cfg->device_feature_select);
> +	features = ioread32(&common_cfg->device_feature);
> +
> +	if (!(features & BIT(VIRTIO_IOMMU_F_TOPOLOGY))) {
> +		pci_dbg(dev, "device doesn't have topology description");
> +		goto out_reset;
> +	}
> +
> +	ret = viommu_pci_find_capability(dev, VIRTIO_PCI_CAP_DEVICE_CFG, &cap);
> +	if (!ret) {
> +		pci_warn(dev, "device config capability not found\n");
> +		goto out_reset;
> +	}
> +
> +	regs = pci_iomap(dev, cap.bar, 0);
> +	if (!regs)
> +		goto out_reset;
> +
> +	pci_info(dev, "parsing virtio-iommu topology\n");
> +	ret = viommu_parse_topology(&dev->dev, regs + cap.offset,
> +				    pci_resource_len(dev, 0) - cap.offset);
> +	if (ret)
> +		pci_warn(dev, "failed to parse topology: %d\n", ret);
> +
> +	pci_iounmap(dev, regs);
> +out_reset:
> +	ret = viommu_pci_reset(common_cfg);
> +	if (ret)
> +		pci_warn(dev, "unable to reset device\n");
> +out_unmap_common:
> +	pci_iounmap(dev, common_regs);
> +}
> +
> +/*
> + * Catch a PCI virtio-iommu implementation early to get the topology description
> + * before we start probing other endpoints.
> + */
> +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REDHAT_QUMRANET, 0x1040 + VIRTIO_ID_IOMMU,
> +			viommu_pci_parse_topology);
> -- 
> 2.28.0
> 




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux