[cc += Mario Limonciello @ Dell] On Tue, Sep 22, 2020 at 10:39:17AM -0400, Alex Deucher wrote: > On Tue, Sep 22, 2020 at 2:54 AM Lukas Wunner <lukas@xxxxxxxxx> wrote: > > On Mon, Sep 21, 2020 at 07:10:55PM -0400, Alex Deucher wrote: > > > Recent AMD laptops which have iGPU + dGPU have been non-functional on > > > Linux. The issue is that the laptops rely on ACPI to control the dGPU > > > power and that is not happening because the bridges are hotplug > > > capable, and the current pci code does not allow runtime pm on hotplug > > > capable bridges. This worked on previous laptops presumably because > > > the bridges did not support hotplug or they hit one of the allowed > > > cases. The driver enables runtime power management, but since the > > > dGPU does not actually get powered down via the platform ACPI > > > controls, no power is saved, and things fall apart on resume leading > > > to an unusable GPU or a system hang. To work around this users can > > > currently disable runtime pm in the GPU driver or specify > > > pcie_port_pm=force to force d3 on bridges. I'm not sure what the best > > > solution for this is. I'd rather not have to add device IDs to a > > > whitelist every time we release a new platform. Suggestions? What > > > about something like the attached patch work? > > > > What is Windows doing on these machines? Microsoft came up with an > > ACPI _DSD property to tell OSPM that it's safe to suspend a hotplug > > port to D3: > > > > https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3 I've just taken a look at the ACPI dumps provided by Michal Rostecki and Arthur Borsboom in the Gitlab bugs linked below. The topology looks like this: 00:01.1 Root Port [\_SB.PCI0.GPP0] 01:00.0 Switch Upstream [\_SB.PCI0.GPP0.SWUS] 02:00.0 Switch Downstream [\_SB.PCI0.GPP0.SWUS.SWDS] 03:00.0 dGPU [\_SB.PCI0.GPP0.SWUS.SWDS.VGA] 03:00.1 dGPU Audio [\_SB.PCI0.GPP0.SWUS.SWDS.HDAU] The Root Port is hotplug-capable but is not suspended because we only allow that for Thunderbolt hotplug ports or root ports with Microsoft's HotPlugSupportInD3 _DSD property. However, that _DSD is not present in the ACPI dumps and the Root Port is obviously not a Thunderbolt port either. Again, it would be good to know why it's working on Windows. Could you ask AMD Windows driver folks? The ACPI tables look very similar even though they're from different vendors (Dell and MSI), so they were probably supplied by AMD to those OEMs. It's quite possible that Windows is now using a BIOS cut-off and allows D3 by default on newer BIOSes, so I'm not opposed to your patch. But it would be good to have some kind of confirmation before we risk regressing machines which do not support D3 on hotplug-capable Root Ports. Thanks, Lukas > > > From 3a08cb6ac38c47b921b8b6f31b03fcd8f13c4018 Mon Sep 17 00:00:00 2001 > > > From: Alex Deucher <alexander.deucher@xxxxxxx> > > > Date: Mon, 21 Sep 2020 18:07:27 -0400 > > > Subject: [PATCH] pci: allow d3 on hotplug bridges after 2018 > > > > > > Newer AMD laptops have hotplug capabe bridges with dGPUs behind them. > > > If d3 is disabled on the bridge, the dGPU is never powered down even > > > though the dGPU driver may think it is because power is handled by > > > the pci core. Things fall apart when the driver attempts to resume > > > a dGPU that was not properly powered down which leads to hangs. > > > > > > Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1252 > > > Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1222 > > > Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1304 > > > Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx> > > > --- > > > drivers/pci/pci.c | 2 +- > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > > index a458c46d7e39..12927d5df4b9 100644 > > > --- a/drivers/pci/pci.c > > > +++ b/drivers/pci/pci.c > > > @@ -2856,7 +2856,7 @@ bool pci_bridge_d3_possible(struct pci_dev *bridge) > > > * by vendors for runtime D3 at least until 2018 because there > > > * was no OS support. > > > */ > > > - if (bridge->is_hotplug_bridge) > > > + if (bridge->is_hotplug_bridge && (dmi_get_bios_year() <= 2018)) > > > return false; > > > > > > if (dmi_check_system(bridge_d3_blacklist)) > > > -- > > > 2.25.4 > > >
