On Wed, Sep 16, 2020 at 06:49:59PM +0530, Manivannan Sadhasivam wrote:
> The PCIe IP on SM8250 SoC is similar to the one used on SDM845. Hence
> the support is added reusing the 2.7.0 ops. Only difference is the need
> of ATU base, which will be fetched opionally if provided by DT/ACPI.
>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
s/opionally/optionally/
$ git log --oneline drivers/pci/controller/dwc/pcie-qcom.c | head -10
824001cb64c0 PCI: qcom: Replace define with standard value
51ed2c2b6026 PCI: qcom: Support pci speed set for ipq806x
8df093fe2ae1 PCI: qcom: Add ipq8064 rev2 variant
de3c4bf64897 PCI: qcom: Add support for tx term offset for rev 2.1.0
5149901e9e6d PCI: qcom: Define some PARF params needed for ipq8064 SoC
6a114526af46 PCI: qcom: Use bulk clk api and assert on error
ee367e2cdd22 PCI: qcom: Add missing reset for ipq806x
dd58318c019f PCI: qcom: Change duplicate PCI reset to phy reset
Make yours match, maybe like this:
PCI: qcom: Add SM8250 SoC support
That way the important information ("SM8250") isn't way at the end
where it may get chopped off.
If you're ambitious, do this for the non-PCI patches, too.
