Re: [v2,2/3] PCI: mediatek: Add new generation controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2020-09-14 at 08:32 -0600, Rob Herring wrote:
> On Mon, Sep 14, 2020 at 5:07 AM Jianjun Wang <jianjun.wang@xxxxxxxxxxxx> wrote:
> >
> > On Fri, 2020-09-11 at 16:44 -0600, Rob Herring wrote:
> > > On Thu, Sep 10, 2020 at 11:45:35AM +0800, Jianjun Wang wrote:
> > > > MediaTek's PCIe host controller has three generation HWs, the new
> > > > generation HW is an individual bridge, it supoorts Gen3 speed and
> > > > up to 256 MSI interrupt numbers for multi-function devices.
> > > >
> > > > Add support for new Gen3 controller which can be found on MT8192.
> > > >
> > > > Signed-off-by: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
> > > > Acked-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx>
> > > > ---
> > > >  drivers/pci/controller/Kconfig              |   14 +
> > > >  drivers/pci/controller/Makefile             |    1 +
> > > >  drivers/pci/controller/pcie-mediatek-gen3.c | 1076 +++++++++++++++++++
> > > >  3 files changed, 1091 insertions(+)
> > > >  create mode 100644 drivers/pci/controller/pcie-mediatek-gen3.c
> > > >
> > > > diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> > > > index f18c3725ef80..83daa772595b 100644
> > > > --- a/drivers/pci/controller/Kconfig
> > > > +++ b/drivers/pci/controller/Kconfig
> > > > @@ -239,6 +239,20 @@ config PCIE_MEDIATEK
> > > >       Say Y here if you want to enable PCIe controller support on
> > > >       MediaTek SoCs.
> > > >
> > > > +config PCIE_MEDIATEK_GEN3
> > > > +   tristate "MediaTek GEN3 PCIe controller"
> > > > +   depends on ARCH_MEDIATEK || COMPILE_TEST
> > > > +   depends on OF
> > > > +   depends on PCI_MSI_IRQ_DOMAIN
> > > > +   help
> > > > +     Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
> > > > +     This PCIe controller provides the capable of Gen3, Gen2 and
> > > > +     Gen1 speed, and support up to 256 MSI interrupt numbers for
> > > > +     multi-function devices.
> > > > +
> > > > +     Say Y here if you want to enable Gen3 PCIe controller support on
> > > > +     MediaTek SoCs.
> > > > +
> > > >  config PCIE_TANGO_SMP8759
> > > >     bool "Tango SMP8759 PCIe controller (DANGEROUS)"
> > > >     depends on ARCH_TANGO && PCI_MSI && OF
> > > > diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> > > > index bcdbf49ab1e4..9c1b96777597 100644
> > > > --- a/drivers/pci/controller/Makefile
> > > > +++ b/drivers/pci/controller/Makefile
> > > > @@ -27,6 +27,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
> > > >  obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
> > > >  obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
> > > >  obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
> > > > +obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie-mediatek-gen3.o
> > > >  obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
> > > >  obj-$(CONFIG_VMD) += vmd.o
> > > >  obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
> > > > diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
> > > > new file mode 100644
> > > > index 000000000000..f8c8bdf88d33
> > > > --- /dev/null
> > > > +++ b/drivers/pci/controller/pcie-mediatek-gen3.c
> > > > @@ -0,0 +1,1076 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * MediaTek PCIe host controller driver.
> > > > + *
> > > > + * Copyright (c) 2020 MediaTek Inc.
> > > > + * Author: Jianjun Wang <jianjun.wang@xxxxxxxxxxxx>
> > > > + */
> > > > +
> > > > +#include <linux/clk.h>
> > > > +#include <linux/delay.h>
> > > > +#include <linux/iopoll.h>
> > > > +#include <linux/irq.h>
> > > > +#include <linux/irqchip/chained_irq.h>
> > > > +#include <linux/irqdomain.h>
> > > > +#include <linux/kernel.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/msi.h>
> > > > +#include <linux/of_address.h>
> > > > +#include <linux/of_clk.h>
> > > > +#include <linux/of_pci.h>
> > > > +#include <linux/of_platform.h>
> > > > +#include <linux/pci.h>
> > > > +#include <linux/phy/phy.h>
> > > > +#include <linux/platform_device.h>
> > > > +#include <linux/pm_domain.h>
> > > > +#include <linux/pm_runtime.h>
> > > > +#include <linux/reset.h>
> > > > +
> > > > +#include "../pci.h"
> > > > +
> > > > +#define PCIE_SETTING_REG           0x80
> > > > +#define PCIE_PCI_IDS_1                     0x9c
> > > > +#define PCI_CLASS(class)           (class << 8)
> > > > +#define PCIE_RC_MODE                       BIT(0)
> > > > +
> > > > +#define PCIE_CFGNUM_REG                    0x140
> > > > +#define PCIE_CFG_DEVFN(devfn)              ((devfn) & GENMASK(7, 0))
> > > > +#define PCIE_CFG_BUS(bus)          (((bus) << 8) & GENMASK(15, 8))
> > > > +#define PCIE_CFG_BYTE_EN(bytes)            (((bytes) << 16) & GENMASK(19, 16))
> > > > +#define PCIE_CFG_FORCE_BYTE_EN             BIT(20)
> > > > +#define PCIE_CFG_OFFSET_ADDR               0x1000
> > > > +#define PCIE_CFG_HEADER(devfn, bus) \
> > > > +   (PCIE_CFG_DEVFN(devfn) | PCIE_CFG_BUS(bus))
> > > > +
> > > > +#define PCIE_CFG_HEADER_FORCE_BE(devfn, bus, bytes) \
> > > > +   (PCIE_CFG_HEADER(devfn, bus) | PCIE_CFG_BYTE_EN(bytes) \
> > > > +    | PCIE_CFG_FORCE_BYTE_EN)
> > > > +
> > > > +#define PCIE_RST_CTRL_REG          0x148
> > > > +#define PCIE_MAC_RSTB                      BIT(0)
> > > > +#define PCIE_PHY_RSTB                      BIT(1)
> > > > +#define PCIE_BRG_RSTB                      BIT(2)
> > > > +#define PCIE_PE_RSTB                       BIT(3)
> > > > +
> > > > +#define PCIE_MISC_STATUS_REG               0x14C
> > > > +#define PCIE_LTR_MSG_RECEIVED              BIT(0)
> > > > +#define PCIE_PCIE_MSG_RECEIVED             BIT(1)
> > > > +
> > > > +#define PCIE_LTSSM_STATUS_REG              0x150
> > > > +#define PCIE_LTSSM_STATE_MASK              GENMASK(28, 24)
> > > > +#define PCIE_LTSSM_STATE(val)              ((val & PCIE_LTSSM_STATE_MASK) >> 24)
> > > > +#define PCIE_LTSSM_STATE_L0                0x10
> > > > +#define PCIE_LTSSM_STATE_L1_IDLE   0x13
> > > > +#define PCIE_LTSSM_STATE_L2_IDLE   0x14
> > > > +
> > > > +#define PCIE_LINK_STATUS_REG               0x154
> > > > +#define PCIE_PORT_LINKUP           BIT(8)
> > > > +
> > > > +#define PCIE_MSI_SET_NUM           8
> > > > +#define PCIE_MSI_IRQS_PER_SET              32
> > > > +#define PCIE_MSI_IRQS_NUM \
> > > > +   (PCIE_MSI_IRQS_PER_SET * (PCIE_MSI_SET_NUM))
> > > > +
> > > > +#define PCIE_INT_ENABLE_REG                0x180
> > > > +#define PCIE_MSI_MASK                      GENMASK(PCIE_MSI_SET_NUM + 8 - 1, 8)
> > > > +#define PCIE_MSI_SHIFT                     8
> > > > +#define PCIE_INTX_SHIFT                    24
> > > > +#define PCIE_INTX_MASK                     GENMASK(27, 24)
> > > > +#define PCIE_MSG_MASK                      BIT(28)
> > > > +#define PCIE_AER_MASK                      BIT(29)
> > > > +#define PCIE_PM_MASK                       BIT(30)
> > > > +
> > > > +#define PCIE_INT_STATUS_REG                0x184
> > > > +#define PCIE_MSI_SET_ENABLE_REG            0x190
> > > > +
> > > > +#define PCIE_LOW_POWER_CTRL_REG            0x194
> > > > +#define PCIE_DIS_LOWPWR_MASK               GENMASK(3, 0)
> > > > +#define PCIE_DIS_L0S_MASK          BIT(0)
> > > > +#define PCIE_DIS_L1_MASK           BIT(1)
> > > > +#define PCIE_DIS_L11_MASK          BIT(2)
> > > > +#define PCIE_DIS_L12_MASK          BIT(3)
> > > > +#define PCIE_FORCE_DIS_LOWPWR              GENMASK(11, 8)
> > > > +#define PCIE_FORCE_DIS_L0S         BIT(8)
> > > > +#define PCIE_FORCE_DIS_L1          BIT(9)
> > > > +#define PCIE_FORCE_DIS_L11         BIT(10)
> > > > +#define PCIE_FORCE_DIS_L12         BIT(11)
> > > > +
> > > > +#define PCIE_ICMD_PM_REG           0x198
> > > > +#define PCIE_TURN_OFF_LINK         BIT(4)
> > > > +
> > > > +#define PCIE_MSI_ADDR_BASE_REG             0xc00
> > > > +#define PCIE_MSI_SET_OFFSET                0x10
> > > > +#define PCIE_MSI_STATUS_OFFSET             0x04
> > > > +#define PCIE_MSI_ENABLE_OFFSET             0x08
> > > > +
> > > > +#define PCIE_TRANS_TABLE_BASE_REG  0x800
> > > > +#define PCIE_ATR_SRC_ADDR_MSB_OFFSET       0x4
> > > > +#define PCIE_ATR_TRSL_ADDR_LSB_OFFSET      0x8
> > > > +#define PCIE_ATR_TRSL_ADDR_MSB_OFFSET      0xc
> > > > +#define PCIE_ATR_TRSL_PARAM_OFFSET 0x10
> > > > +#define PCIE_ATR_TLB_SET_OFFSET            0x20
> > > > +
> > > > +#define PCIE_MAX_TRANS_TABLES              8
> > > > +#define ATR_EN                             BIT(0)
> > > > +#define ATR_SIZE(size)                     ((((size) - 1) << 1) & GENMASK(6, 1))
> > > > +#define ATR_ID(id)                 (id & GENMASK(3, 0))
> > > > +#define ATR_PARAM(param)           (((param) << 16) & GENMASK(27, 16))
> > > > +
> > > > +/**
> > > > + * struct mtk_pcie_msi - MSI information for each set
> > > > + * @base: IO mapped register base
> > > > + * @hwirq: Hardware interrupt number
> > > > + * @irq: MSI set Interrupt number
> > > > + * @index: MSI set number
> > > > + * @msg_addr: MSI message address
> > > > + * @domain: IRQ domain
> > > > + */
> > > > +struct mtk_pcie_msi {
> > > > +   void __iomem *base;
> > > > +   int hwirq;
> > > > +   int irq;
> > > > +   int index;
> > > > +   phys_addr_t msg_addr;
> > > > +   struct irq_domain *domain;
> > > > +};
> > > > +
> > > > +/**
> > > > + * struct mtk_pcie_port - PCIe port information
> > > > + * @dev: PCIe device
> > > > + * @base: IO mapped register base
> > > > + * @reg_base: Physical register base
> > > > + * @mac_reset: mac reset control
> > > > + * @phy_reset: phy reset control
> > > > + * @phy: PHY controller block
> > > > + * @clks: PCIe clocks
> > > > + * @num_clks: PCIe clocks count for this port
> > > > + * @is_suspended: device suspend state
> > > > + * @irq: PCIe controller interrupt number
> > > > + * @intx_domain: legacy INTx IRQ domain
> > > > + * @msi_domain: MSI IRQ domain
> > > > + * @msi_top_domain: MSI IRQ top domain
> > > > + * @msi_info: MSI sets information
> > > > + * @lock: lock protecting IRQ bit map
> > > > + * @msi_irq_in_use: bit map for assigned MSI IRQ
> > > > + */
> > > > +struct mtk_pcie_port {
> > > > +   struct device *dev;
> > > > +   void __iomem *base;
> > > > +   phys_addr_t reg_base;
> > > > +   struct reset_control *mac_reset;
> > > > +   struct reset_control *phy_reset;
> > > > +   struct phy *phy;
> > > > +   struct clk **clks;
> > > > +   int num_clks;
> > > > +   bool is_suspended;
> > > > +
> > > > +   int irq;
> > > > +   struct irq_domain *intx_domain;
> > > > +   struct irq_domain *msi_domain;
> > > > +   struct irq_domain *msi_top_domain;
> > > > +   struct mtk_pcie_msi **msi_info;
> > > > +   struct mutex lock;
> > > > +   DECLARE_BITMAP(msi_irq_in_use, PCIE_MSI_IRQS_NUM);
> > > > +};
> > > > +
> > > > +static int mtk_pcie_config_read(struct pci_bus *bus, unsigned int devfn,
> > > > +                               int where, int size, u32 *val)
> > > > +{
> > > > +   struct mtk_pcie_port *port = bus->sysdata;
> > > > +   int bytes;
> > > > +
> > > > +   bytes = ((1 << size) - 1) << (where & 0x3);
> > > > +   writel(PCIE_CFG_HEADER_FORCE_BE(devfn, bus->number, bytes),
> > > > +          port->base + PCIE_CFGNUM_REG);
> > > > +
> > > > +   *val = readl(port->base + PCIE_CFG_OFFSET_ADDR + (where & ~0x3));
> > > > +
> > > > +   if (size <= 2)
> > > > +           *val = (*val >> (8 * (where & 0x3))) & ((1 << (size * 8)) - 1);
> > > > +
> > > > +   return PCIBIOS_SUCCESSFUL;
> > > > +}
> > > > +
> > > > +static int mtk_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
> > > > +                                int where, int size, u32 val)
> > > > +{
> > > > +   struct mtk_pcie_port *port = bus->sysdata;
> > > > +   int bytes;
> > > > +
> > > > +   bytes = ((1 << size) - 1) << (where & 0x3);
> > > > +   writel(PCIE_CFG_HEADER_FORCE_BE(devfn, bus->number, bytes),
> > > > +          port->base + PCIE_CFGNUM_REG);
> > > > +
> > > > +   if (size <= 2)
> > > > +           val = (val & ((1 << (size * 8)) - 1)) << ((where & 0x3) * 8);
> > > > +
> > > > +   writel(val, port->base + PCIE_CFG_OFFSET_ADDR + (where & ~0x3));
> > > > +
> > > > +   return PCIBIOS_SUCCESSFUL;
> > > > +}
> > > > +
> > > > +static struct pci_ops mtk_pcie_ops = {
> > > > +   .read  = mtk_pcie_config_read,
> > > > +   .write = mtk_pcie_config_write,
> > > > +};
> > > > +
> > > > +static void mtk_pcie_set_trans_window(void __iomem *reg,
> > > > +                                 resource_size_t cpu_addr,
> > > > +                                 resource_size_t pci_addr, size_t size)
> > > > +{
> > > > +   writel(lower_32_bits(cpu_addr) | ATR_SIZE(fls(size) - 1) | ATR_EN, reg);
> > > > +   writel(upper_32_bits(cpu_addr), reg + PCIE_ATR_SRC_ADDR_MSB_OFFSET);
> > > > +   writel(lower_32_bits(pci_addr), reg + PCIE_ATR_TRSL_ADDR_LSB_OFFSET);
> > > > +   writel(upper_32_bits(pci_addr), reg + PCIE_ATR_TRSL_ADDR_MSB_OFFSET);
> > > > +   writel(ATR_ID(0) | ATR_PARAM(0), reg + PCIE_ATR_TRSL_PARAM_OFFSET);
> > > > +}
> > > > +
> > > > +static int mtk_pcie_set_trans_table(void __iomem *reg,
> > > > +                               resource_size_t cpu_addr,
> > > > +                               resource_size_t pci_addr, size_t size,
> > > > +                               int num)
> > > > +{
> > > > +   void __iomem *table_base;
> > > > +
> > > > +   if (num > PCIE_MAX_TRANS_TABLES)
> > > > +           return -ENODEV;
> > > > +
> > > > +   table_base = reg + num * PCIE_ATR_TLB_SET_OFFSET;
> > > > +   mtk_pcie_set_trans_window(table_base, cpu_addr, pci_addr, size);
> > > > +
> > > > +   return 0;
> > > > +}
> > > > +
> > > > +static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
> > > > +{
> > > > +   struct resource_entry *entry;
> > > > +   struct pci_host_bridge *host = pci_host_bridge_from_priv(port);
> > > > +   u32 val;
> > > > +   int err = 0, table_index = 0;
> > > > +
> > > > +   /* Set as RC mode */
> > > > +   val = readl(port->base + PCIE_SETTING_REG);
> > > > +   val |= PCIE_RC_MODE;
> > > > +   writel(val, port->base + PCIE_SETTING_REG);
> > > > +
> > > > +   /* Set class code */
> > > > +   val = readl(port->base + PCIE_PCI_IDS_1);
> > > > +   val &= ~GENMASK(31, 8);
> > > > +   val |= PCI_CLASS(PCI_CLASS_BRIDGE_PCI << 8);
> > > > +   writel(val, port->base + PCIE_PCI_IDS_1);
> > > > +
> > > > +   /* Assert all reset signals */
> > > > +   val = readl(port->base + PCIE_RST_CTRL_REG);
> > > > +   val |= PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB | PCIE_PE_RSTB;
> > > > +   writel(val, port->base + PCIE_RST_CTRL_REG);
> > > > +
> > > > +   /* De-assert reset signals*/
> > > > +   val &= ~(PCIE_MAC_RSTB | PCIE_PHY_RSTB | PCIE_BRG_RSTB);
> > > > +   writel(val, port->base + PCIE_RST_CTRL_REG);
> > > > +
> > > > +   usleep_range(100 * 1000, 120 * 1000);
> > >
> > > Seems like a long delay...
> >
> > Yes, it's truly a long delay, the PCI Express Card Electromechanical
> > Specification suggests that the de-assertion of PERST# should be delayed
> > 100ms to wait the reference clocks become stable.I will discuss with the
> > designers to check if we really need that long time and try to make it
> > shorter.
> 
> Just add a comment as to what the delay is for or based on.
> 
> [...]
> 
> > > > +static int __maybe_unused mtk_pcie_suspend_noirq(struct device *dev)
> > >
> > > Why do you need the noirq variant?
> >
> > I think the suspend of bus controller should be the last callback
> > function which will be called, so I add noirq variant to make sure it's
> > called after the device driver's suspend function.
> 
> The Linux driver model will ensure that. Child devices will be
> suspended before the parent. If there's some non parent-child
> dependency, that should get handled with devlinks.
> 
> Rob

Hi Rob,

If I want to trigger the PCIe link to L2 state, disable clocks and power
off the MAC and PHY when system suspend, should I use the *noirq*
callbacks to do so or just the normal suspend is sufficient? 

Thanks.
> 
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux