Split the PCIe node and add pciecfg node to fix MSI issue. Signed-off-by: Chuanjia Liu <chuanjia.liu@xxxxxxxxxxxx> Acked-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx> --- .../bindings/pci/mediatek-pcie-cfg.yaml | 37 +++++ .../devicetree/bindings/pci/mediatek-pcie.txt | 139 +++++++++++------- 2 files changed, 123 insertions(+), 53 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml new file mode 100644 index 000000000000..cd72973c99d5 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek PCIECFG controller + +maintainers: + - Chuanjia Liu <chuanjia.liu@xxxxxxxxxxxx> + - Jianjun Wang <jianjun.wang@xxxxxxxxxxxx> + +description: | + The MediaTek PCIECFG controller controls some feature about + LTSSM, ASPM and so on. + +properties: + compatible: + items: + - enum: + - mediatek,generic-pciecfg + - const: syscon + + reg: + maxItems: 1 + +required: + - compatible + - reg + +examples: + - | + pciecfg: pciecfg@1a140000 { + compatible = "mediatek,generic-pciecfg", "syscon"; + reg = <0x1a140000 0x1000>; + }; +... diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt index 7468d666763a..f849703dfb17 100644 --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt @@ -8,7 +8,7 @@ Required properties: "mediatek,mt7623-pcie" "mediatek,mt7629-pcie" - device_type: Must be "pci" -- reg: Base addresses and lengths of the PCIe subsys and root ports. +- reg: Base addresses and lengths of the root ports. - reg-names: Names of the above areas to use during resource lookup. - #address-cells: Address representation for root ports (must be 3) - #size-cells: Size representation for root ports (must be 2) @@ -19,10 +19,10 @@ Required properties: - sys_ckN :transaction layer and data link layer clock Required entries for MT2701/MT7623: - free_ck :for reference clock of PCIe subsys - Required entries for MT2712/MT7622: + Required entries for MT2712/MT7622/MT7629: - ahb_ckN :AHB slave interface operating clock for CSR access and RC initiated MMIO access - Required entries for MT7622: + Required entries for MT7622/MT7629: - axi_ckN :application layer MMIO channel operating clock - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when pcie_mac_ck/pcie_pipe_ck is turned off @@ -47,7 +47,7 @@ Required properties for MT7623/MT2701: - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the number of root ports. -Required properties for MT2712/MT7622: +Required properties for MT2712/MT7622/MT7629: -interrupts: A list of interrupt outputs of the controller, must have one entry for each PCIe port @@ -143,56 +143,73 @@ Examples for MT7623: Examples for MT2712: - pcie: pcie@11700000 { + pcie1: pcie@112ff000 { compatible = "mediatek,mt2712-pcie"; device_type = "pci"; - reg = <0 0x11700000 0 0x1000>, - <0 0x112ff000 0 0x1000>; - reg-names = "port0", "port1"; + reg = <0 0x112ff000 0 0x1000>; + reg-names = "port1"; #address-cells = <3>; #size-cells = <2>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, - <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, - <&pericfg CLK_PERI_PCIE0>, + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, <&pericfg CLK_PERI_PCIE1>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + clock-names = "sys_ck1", "ahb_ck1"; + phys = <&u3port1 PHY_TYPE_PCIE>; + phy-names = "pcie-phy1"; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; + status = "disabled"; - pcie0: pcie@0,0 { - reg = <0x0000 0 0 0 0>; + slot1: pcie@1,0 { + reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; ranges; interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - pcie_intc0: interrupt-controller { + interrupt-map = <0 0 0 1 &pcie_intc1 0>, + <0 0 0 2 &pcie_intc1 1>, + <0 0 0 3 &pcie_intc1 2>, + <0 0 0 4 &pcie_intc1 3>; + pcie_intc1: interrupt-controller { interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; }; }; + }; - pcie1: pcie@1,0 { - reg = <0x0800 0 0 0 0>; + pcie0: pcie@11700000 { + compatible = "mediatek,mt2712-pcie"; + device_type = "pci"; + reg = <0 0x11700000 0 0x1000>; + reg-names = "port0"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie_irq"; + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, + <&pericfg CLK_PERI_PCIE0>; + clock-names = "sys_ck0", "ahb_ck0"; + phys = <&u3port0 PHY_TYPE_PCIE>; + phy-names = "pcie-phy0"; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + status = "disabled"; + + slot0: pcie@0,0 { + reg = <0x0000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; ranges; interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc1 0>, - <0 0 0 2 &pcie_intc1 1>, - <0 0 0 3 &pcie_intc1 2>, - <0 0 0 4 &pcie_intc1 3>; - pcie_intc1: interrupt-controller { + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + pcie_intc0: interrupt-controller { interrupt-controller; #address-cells = <0>; #interrupt-cells = <1>; @@ -202,39 +219,30 @@ Examples for MT2712: Examples for MT7622: - pcie: pcie@1a140000 { + pcie0: pcie@1a143000 { compatible = "mediatek,mt7622-pcie"; device_type = "pci"; - reg = <0 0x1a140000 0 0x1000>, - <0 0x1a143000 0 0x1000>, - <0 0x1a145000 0 0x1000>; - reg-names = "subsys", "port0", "port1"; + reg = <0 0x1a143000 0 0x1000>; + reg-names = "port0"; #address-cells = <3>; #size-cells = <2>; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>, - <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "pcie_irq"; clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, - <&pciesys CLK_PCIE_P1_MAC_EN>, <&pciesys CLK_PCIE_P0_AHB_EN>, - <&pciesys CLK_PCIE_P1_AHB_EN>, <&pciesys CLK_PCIE_P0_AUX_EN>, - <&pciesys CLK_PCIE_P1_AUX_EN>, <&pciesys CLK_PCIE_P0_AXI_EN>, - <&pciesys CLK_PCIE_P1_AXI_EN>, <&pciesys CLK_PCIE_P0_OBFF_EN>, - <&pciesys CLK_PCIE_P1_OBFF_EN>, - <&pciesys CLK_PCIE_P0_PIPE_EN>, - <&pciesys CLK_PCIE_P1_PIPE_EN>; - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", - "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", - "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; - phy-names = "pcie-phy0", "pcie-phy1"; + <&pciesys CLK_PCIE_P0_PIPE_EN>; + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", + "axi_ck0", "obff_ck0", "pipe_ck0"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; bus-range = <0x00 0xff>; - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; + status = "disabled"; - pcie0: pcie@0,0 { + slot0: pcie@0,0 { reg = <0x0000 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; @@ -251,8 +259,33 @@ Examples for MT7622: #interrupt-cells = <1>; }; }; + }; + + pcie1: pcie@1a145000 { + compatible = "mediatek,mt7622-pcie"; + device_type = "pci"; + reg = <0 0x1a145000 0 0x1000>; + reg-names = "port1"; + #address-cells = <3>; + #size-cells = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "pcie_irq"; + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, + /* designer has connect RC1 with p0_ahb clock */ + <&pciesys CLK_PCIE_P0_AHB_EN>, + <&pciesys CLK_PCIE_P1_AUX_EN>, + <&pciesys CLK_PCIE_P1_AXI_EN>, + <&pciesys CLK_PCIE_P1_OBFF_EN>, + <&pciesys CLK_PCIE_P1_PIPE_EN>; + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", + "axi_ck1", "obff_ck1", "pipe_ck1"; + + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; + status = "disabled"; - pcie1: pcie@1,0 { + slot1: pcie@1,0 { reg = <0x0800 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; -- 2.18.0
