On Fri, 2020-09-11 at 16:50 -0600, Rob Herring wrote: > On Thu, Sep 10, 2020 at 02:11:12PM +0800, Chuanjia Liu wrote: > > Split the PCIe node and add pciecfg node to fix MSI issue. > > > > Acked-by: Ryder Lee <ryder.lee@xxxxxxxxxxxx> > > Signed-off-by: Chuanjia Liu <chuanjia.liu@xxxxxxxxxxxx> > > --- > > .../bindings/pci/mediatek-pcie-cfg.yaml | 38 +++++ > > .../devicetree/bindings/pci/mediatek-pcie.txt | 144 +++++++++++------- > > 2 files changed, 129 insertions(+), 53 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml > > > > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml > > new file mode 100644 > > index 000000000000..4d2835ab4858 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml > > @@ -0,0 +1,38 @@ > > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Mediatek PCIECFG controller > > + > > +maintainers: > > + - Chuanjia Liu <chuanjia.liu@xxxxxxxxxxxx> > > + - Jianjun Wang <jianjun.wang@xxxxxxxxxxxx> > > + > > +description: | > > + The MediaTek PCIECFG controller controls some feature about > > + LTSSM, ASPM and so on. > > + > > +properties: > > + compatible: > > + items: > > + - enum: > > + - mediatek,mt7622-pciecfg > > + - mediatek,mt7629-pciecfg > > + - const: syscon > > + > > + reg: > > + maxItems: 1 > > + > > +required: > > + - compatible > > + - reg > > + > > +examples: > > + - | > > + pciecfg: pciecfg@1a140000 { > > + compatible = "mediatek,mt7622-pciecfg", "syscon"; > > + reg = <0 0x1a140000 0 0x1000>; > > + }; > > +... > > diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt > > index 7468d666763a..31e261933685 100644 > > --- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt > > +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt > > @@ -8,7 +8,7 @@ Required properties: > > "mediatek,mt7623-pcie" > > "mediatek,mt7629-pcie" > > - device_type: Must be "pci" > > -- reg: Base addresses and lengths of the PCIe subsys and root ports. > > +- reg: Base addresses and lengths of the root ports. > > - reg-names: Names of the above areas to use during resource lookup. > > - #address-cells: Address representation for root ports (must be 3) > > - #size-cells: Size representation for root ports (must be 2) > > @@ -19,10 +19,10 @@ Required properties: > > - sys_ckN :transaction layer and data link layer clock > > Required entries for MT2701/MT7623: > > - free_ck :for reference clock of PCIe subsys > > - Required entries for MT2712/MT7622: > > + Required entries for MT2712/MT7622/MT7629: > > - ahb_ckN :AHB slave interface operating clock for CSR access and RC > > initiated MMIO access > > - Required entries for MT7622: > > + Required entries for MT7622/MT7629: > > - axi_ckN :application layer MMIO channel operating clock > > - aux_ckN :pe2_mac_bridge and pe2_mac_core operating clock when > > pcie_mac_ck/pcie_pipe_ck is turned off > > @@ -47,10 +47,13 @@ Required properties for MT7623/MT2701: > > - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the > > number of root ports. > > > > -Required properties for MT2712/MT7622: > > +Required properties for MT2712/MT7622/MT7629: > > -interrupts: A list of interrupt outputs of the controller, must have one > > entry for each PCIe port > > > > +Required properties for MT7622/MT7629: > > +- mediatek,pcie-subsys: Should be a phandle of the pciecfg node. > > + > > You don't need this. You can search for the node by compatible. > > Plus it doesn't match the example. Thanks for you comment, I will change it in the next version. regards, Chuanjia > > > In addition, the device tree node must have sub-nodes describing each > > PCIe port interface, having the following mandatory properties: > > > > @@ -143,56 +146,73 @@ Examples for MT7623: > > > > Examples for MT2712: > > > > - pcie: pcie@11700000 { > > + pcie1: pcie@112ff000 { > > compatible = "mediatek,mt2712-pcie"; > > device_type = "pci"; > > - reg = <0 0x11700000 0 0x1000>, > > - <0 0x112ff000 0 0x1000>; > > - reg-names = "port0", "port1"; > > + reg = <0 0x112ff000 0 0x1000>; > > + reg-names = "port1"; > > #address-cells = <3>; > > #size-cells = <2>; > > - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, > > - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; > > - clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, > > - <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, > > - <&pericfg CLK_PERI_PCIE0>, > > + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "pcie_irq"; > > + clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>, > > <&pericfg CLK_PERI_PCIE1>; > > - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1"; > > - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; > > - phy-names = "pcie-phy0", "pcie-phy1"; > > + clock-names = "sys_ck1", "ahb_ck1"; > > + phys = <&u3port1 PHY_TYPE_PCIE>; > > + phy-names = "pcie-phy1"; > > bus-range = <0x00 0xff>; > > - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; > > + ranges = <0x82000000 0 0x11400000 0x0 0x11400000 0 0x300000>; > > + status = "disabled"; > > > > - pcie0: pcie@0,0 { > > - reg = <0x0000 0 0 0 0>; > > + slot1: pcie@1,0 { > > + reg = <0x0800 0 0 0 0>; > > #address-cells = <3>; > > #size-cells = <2>; > > #interrupt-cells = <1>; > > ranges; > > interrupt-map-mask = <0 0 0 7>; > > - interrupt-map = <0 0 0 1 &pcie_intc0 0>, > > - <0 0 0 2 &pcie_intc0 1>, > > - <0 0 0 3 &pcie_intc0 2>, > > - <0 0 0 4 &pcie_intc0 3>; > > - pcie_intc0: interrupt-controller { > > + interrupt-map = <0 0 0 1 &pcie_intc1 0>, > > + <0 0 0 2 &pcie_intc1 1>, > > + <0 0 0 3 &pcie_intc1 2>, > > + <0 0 0 4 &pcie_intc1 3>; > > + pcie_intc1: interrupt-controller { > > interrupt-controller; > > #address-cells = <0>; > > #interrupt-cells = <1>; > > }; > > }; > > + }; > > > > - pcie1: pcie@1,0 { > > - reg = <0x0800 0 0 0 0>; > > + pcie0: pcie@11700000 { > > + compatible = "mediatek,mt2712-pcie"; > > + device_type = "pci"; > > + reg = <0 0x11700000 0 0x1000>; > > + reg-names = "port0"; > > + #address-cells = <3>; > > + #size-cells = <2>; > > + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "pcie_irq"; > > + clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>, > > + <&pericfg CLK_PERI_PCIE0>; > > + clock-names = "sys_ck0", "ahb_ck0"; > > + phys = <&u3port0 PHY_TYPE_PCIE>; > > + phy-names = "pcie-phy0"; > > + bus-range = <0x00 0xff>; > > + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; > > + status = "disabled"; > > + > > + slot0: pcie@0,0 { > > + reg = <0x0000 0 0 0 0>; > > #address-cells = <3>; > > #size-cells = <2>; > > #interrupt-cells = <1>; > > ranges; > > interrupt-map-mask = <0 0 0 7>; > > - interrupt-map = <0 0 0 1 &pcie_intc1 0>, > > - <0 0 0 2 &pcie_intc1 1>, > > - <0 0 0 3 &pcie_intc1 2>, > > - <0 0 0 4 &pcie_intc1 3>; > > - pcie_intc1: interrupt-controller { > > + interrupt-map = <0 0 0 1 &pcie_intc0 0>, > > + <0 0 0 2 &pcie_intc0 1>, > > + <0 0 0 3 &pcie_intc0 2>, > > + <0 0 0 4 &pcie_intc0 3>; > > + pcie_intc0: interrupt-controller { > > interrupt-controller; > > #address-cells = <0>; > > #interrupt-cells = <1>; > > @@ -202,39 +222,31 @@ Examples for MT2712: > > > > Examples for MT7622: > > > > - pcie: pcie@1a140000 { > > + pcie0: pcie@1a143000 { > > compatible = "mediatek,mt7622-pcie"; > > device_type = "pci"; > > - reg = <0 0x1a140000 0 0x1000>, > > - <0 0x1a143000 0 0x1000>, > > - <0 0x1a145000 0 0x1000>; > > - reg-names = "subsys", "port0", "port1"; > > + reg = <0 0x1a143000 0 0x1000>; > > + reg-names = "port0"; > > + mediatek,pcie-cfg = <&pciecfg>; > > #address-cells = <3>; > > #size-cells = <2>; > > - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>, > > - <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; > > + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>; > > + interrupt-names = "pcie_irq"; > > clocks = <&pciesys CLK_PCIE_P0_MAC_EN>, > > - <&pciesys CLK_PCIE_P1_MAC_EN>, > > <&pciesys CLK_PCIE_P0_AHB_EN>, > > - <&pciesys CLK_PCIE_P1_AHB_EN>, > > <&pciesys CLK_PCIE_P0_AUX_EN>, > > - <&pciesys CLK_PCIE_P1_AUX_EN>, > > <&pciesys CLK_PCIE_P0_AXI_EN>, > > - <&pciesys CLK_PCIE_P1_AXI_EN>, > > <&pciesys CLK_PCIE_P0_OBFF_EN>, > > - <&pciesys CLK_PCIE_P1_OBFF_EN>, > > - <&pciesys CLK_PCIE_P0_PIPE_EN>, > > - <&pciesys CLK_PCIE_P1_PIPE_EN>; > > - clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1", > > - "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1", > > - "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1"; > > - phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>; > > - phy-names = "pcie-phy0", "pcie-phy1"; > > + <&pciesys CLK_PCIE_P0_PIPE_EN>; > > + clock-names = "sys_ck0", "ahb_ck0", "aux_ck0", > > + "axi_ck0", "obff_ck0", "pipe_ck0"; > > + > > power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; > > bus-range = <0x00 0xff>; > > - ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>; > > + ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>; > > + status = "disabled"; > > > > - pcie0: pcie@0,0 { > > + slot0: pcie@0,0 { > > reg = <0x0000 0 0 0 0>; > > #address-cells = <3>; > > #size-cells = <2>; > > @@ -251,8 +263,34 @@ Examples for MT7622: > > #interrupt-cells = <1>; > > }; > > }; > > + }; > > + > > + pcie1: pcie@1a145000 { > > + compatible = "mediatek,mt7622-pcie"; > > + device_type = "pci"; > > + reg = <0 0x1a145000 0 0x1000>; > > + reg-names = "port1"; > > + mediatek,pcie-cfg = <&pciecfg>; > > + #address-cells = <3>; > > + #size-cells = <2>; > > + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>; > > + interrupt-names = "pcie_irq"; > > + clocks = <&pciesys CLK_PCIE_P1_MAC_EN>, > > + /* designer has connect RC1 with p0_ahb clock */ > > + <&pciesys CLK_PCIE_P0_AHB_EN>, > > + <&pciesys CLK_PCIE_P1_AUX_EN>, > > + <&pciesys CLK_PCIE_P1_AXI_EN>, > > + <&pciesys CLK_PCIE_P1_OBFF_EN>, > > + <&pciesys CLK_PCIE_P1_PIPE_EN>; > > + clock-names = "sys_ck1", "ahb_ck1", "aux_ck1", > > + "axi_ck1", "obff_ck1", "pipe_ck1"; > > + > > + power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>; > > + bus-range = <0x00 0xff>; > > + ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>; > > + status = "disabled"; > > > > - pcie1: pcie@1,0 { > > + slot1: pcie@1,0 { > > reg = <0x0800 0 0 0 0>; > > #address-cells = <3>; > > #size-cells = <2>; > > -- > > 2.18.0
