On Fri, Sep 11, 2020 at 08:18:22AM +0000, 吳昊澄 Ricky wrote: > > -----Original Message----- > > From: Bjorn Helgaas [mailto:helgaas@xxxxxxxxxx] > > Sent: Thursday, September 10, 2020 1:44 AM > > To: 吳昊澄 Ricky > > Cc: arnd@xxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; bhelgaas@xxxxxxxxxx; > > ulf.hansson@xxxxxxxxxx; rui_feng@xxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > > puranjay12@xxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; > > vailbhavgupta40@xxxxxxxxxx > > Subject: Re: [PATCH v5 2/2] misc: rtsx: Add power saving functions and fix driving > > parameter > > > > On Wed, Sep 09, 2020 at 07:10:19AM +0000, 吳昊澄 Ricky wrote: > > > > -----Original Message----- > > > > From: Bjorn Helgaas [mailto:helgaas@xxxxxxxxxx] > > > > Sent: Wednesday, September 09, 2020 6:29 AM > > > > To: 吳昊澄 Ricky > > > > Cc: arnd@xxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx; bhelgaas@xxxxxxxxxx; > > > > ulf.hansson@xxxxxxxxxx; rui_feng@xxxxxxxxxxxxxx; > > linux-kernel@xxxxxxxxxxxxxxx; > > > > puranjay12@xxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; > > > > vailbhavgupta40@xxxxxxxxxx > > > > Subject: Re: [PATCH v5 2/2] misc: rtsx: Add power saving functions and fix > > driving > > > > parameter > > > > > > > > On Mon, Sep 07, 2020 at 06:07:31PM +0800, ricky_wu@xxxxxxxxxxx wrote: > > > > > From: Ricky Wu <ricky_wu@xxxxxxxxxxx> > > > > > > > > > > v4: > > > > > split power down flow and power saving function to two patch > > > > > > > > > > v5: > > > > > fix up modified change under the --- line > > > > > > > > Hehe, this came out *above* the "---" line :) > > > > > > > > > Add rts522a L1 sub-state support > > > > > Save more power on rts5227 rts5249 rts525a rts5260 > > > > > Fix rts5260 driving parameter > > > > > > > > > > Signed-off-by: Ricky Wu <ricky_wu@xxxxxxxxxxx> > > > > > --- > > > > > drivers/misc/cardreader/rts5227.c | 112 +++++++++++++++++++++- > > > > > drivers/misc/cardreader/rts5249.c | 145 > > > > ++++++++++++++++++++++++++++- > > > > > drivers/misc/cardreader/rts5260.c | 28 +++--- > > > > > drivers/misc/cardreader/rtsx_pcr.h | 17 ++++ > > > > > 4 files changed, 283 insertions(+), 19 deletions(-) > > > > > > > > > > diff --git a/drivers/misc/cardreader/rts5227.c > > > > b/drivers/misc/cardreader/rts5227.c > > > > > index 747391e3fb5d..8859011672cb 100644 > > > > > --- a/drivers/misc/cardreader/rts5227.c > > > > > +++ b/drivers/misc/cardreader/rts5227.c > > > > > @@ -72,15 +72,80 @@ static void rts5227_fetch_vendor_settings(struct > > > > rtsx_pcr *pcr) > > > > > > > > > > pci_read_config_dword(pdev, PCR_SETTING_REG2, ®); > > > > > pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg); > > > > > + if (rtsx_check_mmc_support(reg)) > > > > > + pcr->extra_caps |= EXTRA_CAPS_NO_MMC; > > > > > pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg); > > > > > if (rtsx_reg_check_reverse_socket(reg)) > > > > > pcr->flags |= PCR_REVERSE_SOCKET; > > > > > } > > > > > > > > > > +static void rts5227_init_from_cfg(struct rtsx_pcr *pcr) > > > > > +{ > > > > > + struct pci_dev *pdev = pcr->pci; > > > > > + int l1ss; > > > > > + u32 lval; > > > > > + struct rtsx_cr_option *option = &pcr->option; > > > > > + > > > > > + l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS); > > > > > + if (!l1ss) > > > > > + return; > > > > > + > > > > > + pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval); > > > > > > > > This looks a little problematic. PCI_L1SS_CTL1 is an architected > > > > register in the ASPM L1 PM Substates capability, and its value may > > > > change at runtime because drivers/pci/pcie/aspm.c manages it. > > > > > > > > It looks like the code below does device-specific configuration based > > > > on the current PCI_L1SS_CTL1 value. But what happens if aspm.c > > > > changes PCI_L1SS_CTL1 later? > > > > > > We are going to make sure and set the best configuration on the > > > current time, if host change the capability later, it doesn't affect > > > function, only affect a little power saving > > > > Why don't you unconditionally do the following? > > > > rtsx_set_dev_flag(pcr, ASPM_L1_1_EN); > > rtsx_set_dev_flag(pcr, ASPM_L1_2_EN); > > rtsx_set_dev_flag(pcr, PM_L1_1_EN); > > rtsx_set_dev_flag(pcr, PM_L1_2_EN); > > Our power saving function have 2 different flow L1 and L1substate, > so we need to check it for which flow we are going to > Detail to see below reply > > > Let's assume the generic code in aspm.c has cleared all these bits: > > > > PCI_L1SS_CTL1_ASPM_L1_1 > > PCI_L1SS_CTL1_ASPM_L1_2 > > PCI_L1SS_CTL1_PCIPM_L1_1 > > PCI_L1SS_CTL1_PCIPM_L1_2 > > > > in the L1 PM Substates capability. > > > > I think you are saying that if you *also* clear ASPM_L1_1_EN, > > ASPM_L1_2_EN, PM_L1_1_EN, and PM_L1_2_EN in your device-specific > > registers, it uses less power than if you set those device-specific > > bits. Right? > > > > And moreover, I think you're saying that if aspm.c subsequently *sets* > > some of those bits in the L1 PM Substates capability, those substates > > *work* even though the device-specific ASPM_L1_1_EN, ASPM_L1_2_EN, > > PM_L1_1_EN, and PM_L1_2_EN bits are not set. Right? > > > > I do not feel good about this as a general strategy. I think we > > should program the device so the behavior is completely predictable, > > regardless of the generic enable bits happened to be set at > > probe-time. > > > > The current approach means that if we enable L1 substates after the > > driver probe, the device is configured differently than if we enabled > > L1 substates before probe. That's not a reliable way to operate it. > > Talk about our power saving function > a) basic L1 power saving > b) advance L1 power saving > c) advance L1 substate power saving I have no idea what the difference between "basic L1 power saving" and "advance L1 power saving" is, so I assume those are device-specific things. If not, please use the same terminology as the PCIe spec. > at initial, we check pci port support L1 subs or not, if not we are > going to b) otherwise going to c). You're not checking whether the port *supports* L1 substates. You would look at PCI_L1SS_CAP to learn that. You're looking at PCI_L1SS_CTL1, which tells you whether L1 substates are *enabled*. > Assume aspm.c change bit of L1 PM Substates capability after our > driver probe, we are going to a) > > So far we did not see any platform change L1 PM Substates capability > after our driver probe. You should expect that aspm.c will change bits in the L1 PM *control* register (PCI_L1SS_CTL1) after probe. You might not actually see it change, depending on how you tested, but you cannot rely on PCI_L1SS_CTL1 being constant. It may change based on power/performance tradeoffs, e.g., whether the system is plugged into AC power, whether it's idle, etc. > > > > > + if (CHK_PCI_PID(pcr, 0x522A)) { > > > > > + if (0 == (lval & 0x0F)) > > > > > + rtsx_pci_enable_oobs_polling(pcr); > > > > > + else > > > > > + rtsx_pci_disable_oobs_polling(pcr); > > > > > + } > > > > > + > > > > > + if (lval & PCI_L1SS_CTL1_ASPM_L1_1) > > > > > + rtsx_set_dev_flag(pcr, ASPM_L1_1_EN); > > > > > + else > > > > > + rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN); > > > > > + > > > > > + if (lval & PCI_L1SS_CTL1_ASPM_L1_2) > > > > > + rtsx_set_dev_flag(pcr, ASPM_L1_2_EN); > > > > > + else > > > > > + rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN); > > > > > + > > > > > + if (lval & PCI_L1SS_CTL1_PCIPM_L1_1) > > > > > + rtsx_set_dev_flag(pcr, PM_L1_1_EN); > > > > > + else > > > > > + rtsx_clear_dev_flag(pcr, PM_L1_1_EN); > > > > > + > > > > > + if (lval & PCI_L1SS_CTL1_PCIPM_L1_2) > > > > > + rtsx_set_dev_flag(pcr, PM_L1_2_EN); > > > > > + else > > > > > + rtsx_clear_dev_flag(pcr, PM_L1_2_EN); > > > > > + > > > > > + if (option->ltr_en) { > > > > > + u16 val; > > > > > + > > > > > + pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val); > > > > > > > > Same thing here. I don't think the PCI core currently changes > > > > PCI_EXP_DEVCTL2 after boot, but it's not a good idea to assume it's > > > > going to be constant. > > > > > > > > > > The same reply > > > > > > > > + if (val & PCI_EXP_DEVCTL2_LTR_EN) { > > > > > + option->ltr_enabled = true; > > > > > + option->ltr_active = true; > > > > > + rtsx_set_ltr_latency(pcr, option->ltr_active_latency); > > > > > + } else { > > > > > + option->ltr_enabled = false; > > > > > + } > > > > > + } > > > > > + > > > > > + if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN > > > > > + | PM_L1_1_EN | PM_L1_2_EN)) > > > > > + option->force_clkreq_0 = false; > > > > > + else > > > > > + option->force_clkreq_0 = true; > > > > > + > > > > > +} > > > > > > > > ------Please consider the environment before printing this e-mail.
