The Kconfig is modified so that the pcie_bus_config setting can be done at build time in the same manner as the CONFIG_PCIEASPM_XXXX choice. The pci_bus_config setting may still be overridden by the bootline param. Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx> --- drivers/pci/Kconfig | 40 ++++++++++++++++++++++++++++++++++++++++ drivers/pci/pci.c | 12 ++++++++++++ 2 files changed, 52 insertions(+) diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 4bef5c2bae9f..efe69b0d9f7f 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -187,6 +187,46 @@ config PCI_HYPERV The PCI device frontend driver allows the kernel to import arbitrary PCI devices from a PCI backend to support PCI driver domains. +choice + prompt "PCIE default bus config setting" + default PCIE_BUS_DEFAULT + depends on PCI + help + One of the following choices will set the pci_bus_config at + compile time. This will still be overridden by the appropriate + pci bootline parameter. + +config PCIE_BUS_TUNE_OFF + bool "Tune Off" + depends on PCI + help + Use the BIOS defaults; doesn't touch MPS at all. + +config PCIE_BUS_DEFAULT + bool "Default" + depends on PCI + help + Ensure MPS matches upstream bridge. + +config PCIE_BUS_SAFE + bool "Safe" + depends on PCI + help + Use largest MPS boot-time devices support. + +config PCIE_BUS_PERFORMANCE + bool "Performance" + depends on PCI + help + Use MPS and MRRS for best performance. + +config PCIE_BUS_PEER2PEER + bool "Peer2peer" + depends on PCI + help + Set MPS = 128 for all devices. +endchoice + source "drivers/pci/hotplug/Kconfig" source "drivers/pci/controller/Kconfig" source "drivers/pci/endpoint/Kconfig" diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e39c5499770f..dfb52ed4a931 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -101,7 +101,19 @@ unsigned long pci_hotplug_mmio_pref_size = DEFAULT_HOTPLUG_MMIO_PREF_SIZE; #define DEFAULT_HOTPLUG_BUS_SIZE 1 unsigned long pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE; + +/* PCIE bus config, can be overridden by bootline param */ +#ifdef CONFIG_PCIE_BUS_TUNE_OFF +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF; +#elif defined CONFIG_PCIE_BUS_SAFE +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_SAFE; +#elif defined CONFIG_PCIE_BUS_PERFORMANCE +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PERFORMANCE; +#elif defined CONFIG_PCIE_BUS_PEER2PEER +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PEER2PEER; +#else enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT; +#endif /* * The default CLS is used if arch didn't set CLS explicitly and not -- 2.17.1
