From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Now that interrupt remapping sets the irqdomain pointer when a PCI device
is added it's possible to store the default irq domain in the device struct
in pcibios_add_device().
If the bus to which a device is connected has an irq domain associated then
this domain is used otherwise the default domain (PCI/MSI native or XEN
PCI/MSI) is used. Using the bus domain ensures that special MSI bus domains
like VMD work.
This makes XEN and the non-remapped native case work solely based on the
irq domain pointer in struct device for PCI/MSI and allows to remove the
arch fallback and make most of the x86_msi ops private to XEN in the next
steps.
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
---
arch/x86/include/asm/irqdomain.h | 2 ++
arch/x86/kernel/apic/msi.c | 2 +-
arch/x86/pci/common.c | 18 +++++++++++++++++-
3 files changed, 20 insertions(+), 2 deletions(-)
--- a/arch/x86/include/asm/irqdomain.h
+++ b/arch/x86/include/asm/irqdomain.h
@@ -53,9 +53,11 @@ extern int mp_irqdomain_ioapic_idx(struc
#ifdef CONFIG_PCI_MSI
void x86_create_pci_msi_domain(void);
struct irq_domain *native_create_pci_msi_domain(void);
+extern struct irq_domain *x86_pci_msi_default_domain;
#else
static inline void x86_create_pci_msi_domain(void) { }
#define native_create_pci_msi_domain NULL
+#define x86_pci_msi_default_domain NULL
#endif
#endif
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -21,7 +21,7 @@
#include <asm/apic.h>
#include <asm/irq_remapping.h>
-static struct irq_domain *x86_pci_msi_default_domain __ro_after_init;
+struct irq_domain *x86_pci_msi_default_domain __ro_after_init;
static void __irq_msi_compose_msg(struct irq_cfg *cfg, struct msi_msg *msg)
{
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -19,6 +19,7 @@
#include <asm/smp.h>
#include <asm/pci_x86.h>
#include <asm/setup.h>
+#include <asm/irqdomain.h>
unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
PCI_PROBE_MMCONF;
@@ -633,8 +634,9 @@ static void set_dev_domain_options(struc
int pcibios_add_device(struct pci_dev *dev)
{
- struct setup_data *data;
struct pci_setup_rom *rom;
+ struct irq_domain *msidom;
+ struct setup_data *data;
u64 pa_data;
pa_data = boot_params.hdr.setup_data;
@@ -661,6 +663,20 @@ int pcibios_add_device(struct pci_dev *d
memunmap(data);
}
set_dev_domain_options(dev);
+
+ /*
+ * Setup the initial MSI domain of the device. If the underlying
+ * bus has a PCI/MSI irqdomain associated use the bus domain,
+ * otherwise set the default domain. This ensures that special irq
+ * domains e.g. VMD are preserved. The default ensures initial
+ * operation if irq remapping is not active. If irq remapping is
+ * active it will overwrite the domain pointer when the device is
+ * associated to a remapping domain.
+ */
+ msidom = dev_get_msi_domain(&dev->bus->dev);
+ if (!msidom)
+ msidom = x86_pci_msi_default_domain;
+ dev_set_msi_domain(&dev->dev, msidom);
return 0;
}
