On 29-07-20, 21:00, Sivaprakash Murugesan wrote: > ipq8074 has two PCIe ports while the support for Gen2 PCIe port is > already available add the support for Gen3 binding. > > Co-developed-by: Selvam Sathappan Periakaruppan <speriaka@xxxxxxxxxxxxxx> > Signed-off-by: Selvam Sathappan Periakaruppan <speriaka@xxxxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx> > --- > .../devicetree/bindings/pci/qcom,pcie.yaml | 47 ++++++++++++++++++++++ The issue is the yaml file is not in linux-phy next.. did we get the conversion done? > 1 file changed, 47 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml > index 2eef6d5..e0559dd 100644 > --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml > @@ -23,6 +23,7 @@ properties: > - qcom,pcie-ipq8064 > - qcom,pcie-ipq8064-v2 > - qcom,pcie-ipq8074 > + - qcom,pcie-ipq8074-gen3 > - qcom,pcie-msm8996 > - qcom,pcie-qcs404 > - qcom,pcie-sdm845 > @@ -295,6 +296,52 @@ allOf: > compatible: > contains: > enum: > + - qcom,pcie-ipq8074-gen3 > + then: > + properties: > + clocks: > + items: > + - description: sys noc interface clock > + - description: AXI master clock > + - description: AXI secondary clock > + - description: AHB clock > + - description: Auxilary clock > + - description: AXI secondary bridge clock > + - description: PCIe rchng clock > + clock-names: > + items: > + - const: iface > + - const: axi_m > + - const: axi_s > + - const: ahb > + - const: aux > + - const: axi_bridge > + - const: rchng > + resets: > + items: > + - description: PIPE reset > + - description: PCIe sleep reset > + - description: PCIe sticky reset > + - description: AXI master reset > + - description: AXI secondary reset > + - description: AHB reset > + - description: AXI master sticky reset > + - description: AXI secondary sticky reset > + reset-names: > + items: > + - const: pipe > + - const: sleep > + - const: sticky > + - const: axi_m > + - const: axi_s > + - const: ahb > + - const: axi_m_sticky > + - const: axi_s_sticky > + - if: > + properties: > + compatible: > + contains: > + enum: > - qcom,pcie-msm8996 > then: > properties: > -- > 2.7.4 -- ~Vinod
