The common Designware init already initializes the RC PCI_COMMAND, BAR0
and BAR1 registers.
The only difference here is the common code sets SERR. If clearing SERR
is what's desired, then the Meson driver should do that instead.
Cc: Yue Wang <yue.wang@xxxxxxxxxxx>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Cc: Kevin Hilman <khilman@xxxxxxxxxxxx>
Cc: linux-pci@xxxxxxxxxxxxxxx
Cc: linux-amlogic@xxxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
drivers/pci/controller/dwc/pci-meson.c | 20 --------------------
1 file changed, 20 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-meson.c b/drivers/pci/controller/dwc/pci-meson.c
index cbde683d107f..d1cfc65f0a69 100644
--- a/drivers/pci/controller/dwc/pci-meson.c
+++ b/drivers/pci/controller/dwc/pci-meson.c
@@ -34,15 +34,6 @@
#define NUM_OF_LANES_X1 BIT(8)
#define DIRECT_SPEED_CHANGE BIT(17)
-#define TYPE1_HDR_OFFSET 0x0
-#define PCIE_STATUS_COMMAND (TYPE1_HDR_OFFSET + 0x04)
-#define PCI_IO_EN BIT(0)
-#define PCI_MEM_SPACE_EN BIT(1)
-#define PCI_BUS_MASTER_EN BIT(2)
-
-#define PCIE_BASE_ADDR0 (TYPE1_HDR_OFFSET + 0x10)
-#define PCIE_BASE_ADDR1 (TYPE1_HDR_OFFSET + 0x14)
-
#define PCIE_CAP_OFFSET 0x70
#define PCIE_DEV_CTRL_DEV_STUS (PCIE_CAP_OFFSET + 0x08)
#define PCIE_CAP_MAX_PAYLOAD_MASK GENMASK(7, 5)
@@ -303,9 +294,6 @@ static void meson_pcie_init_dw(struct meson_pcie *mp)
val = meson_elb_readl(mp, PCIE_GEN2_CTRL_OFF);
val |= NUM_OF_LANES_X1 | DIRECT_SPEED_CHANGE;
meson_elb_writel(mp, val, PCIE_GEN2_CTRL_OFF);
-
- meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR0);
- meson_elb_writel(mp, 0x0, PCIE_BASE_ADDR1);
}
static int meson_size_to_payload(struct meson_pcie *mp, int size)
@@ -353,13 +341,6 @@ static void meson_set_max_rd_req_size(struct meson_pcie *mp, int size)
meson_elb_writel(mp, val, PCIE_DEV_CTRL_DEV_STUS);
}
-static inline void meson_enable_memory_space(struct meson_pcie *mp)
-{
- /* Set the RC Bus Master, Memory Space and I/O Space enables */
- meson_elb_writel(mp, PCI_IO_EN | PCI_MEM_SPACE_EN | PCI_BUS_MASTER_EN,
- PCIE_STATUS_COMMAND);
-}
-
static int meson_pcie_establish_link(struct meson_pcie *mp)
{
struct dw_pcie *pci = &mp->pci;
@@ -370,7 +351,6 @@ static int meson_pcie_establish_link(struct meson_pcie *mp)
meson_set_max_rd_req_size(mp, MAX_READ_REQ_SIZE);
dw_pcie_setup_rc(pp);
- meson_enable_memory_space(mp);
meson_pcie_assert_reset(mp);
--
2.25.1
