Re: [PATCH V2] dt-bindings: pci: convert QCOM pci bindings to YAML

[Rob Herring <robh+dt@xxxxxxxxxx>]

On Sun, Jul 26, 2020 at 9:07 AM Sivaprakash Murugesan
<sivaprak@xxxxxxxxxxxxxxxx> wrote:
>
> From: Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx>
>
> Convert QCOM pci bindings to YAML schema
>
> Signed-off-by: Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx>
> ---
> [v2]
>   - Referenced pci-bus.yaml
>   - removed duplicate properties already referenced by pci-bus.yaml
>   - Addressed comments from Rob
>  .../devicetree/bindings/pci/qcom,pcie.txt          | 330 ---------------
>  .../devicetree/bindings/pci/qcom,pcie.yaml         | 447 +++++++++++++++++++++
>  2 files changed, 447 insertions(+), 330 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
>  create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.yaml


> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> new file mode 100644
> index 000000000000..ddb84f49ac1c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> @@ -0,0 +1,447 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/pci/qcom,pcie.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Qualcomm PCI express root complex
> +
> +maintainers:
> +  - Sivaprakash Murugesan <sivaprak@xxxxxxxxxxxxxx>
> +
> +description:
> +  QCOM PCIe controller uses Designware IP with Qualcomm specific hardware
> +  wrappers.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,pcie-apq8064
> +      - qcom,pcie-apq8084
> +      - qcom,pcie-ipq4019
> +      - qcom,pcie-ipq8064
> +      - qcom,pcie-ipq8074
> +      - qcom,pcie-msm8996
> +      - qcom,pcie-qcs404
> +      - qcom,pcie-sdm845
> +
> +  reg:
> +    description: Register ranges as listed in the reg-names property

Can drop this.

> +    maxItems: 4
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: elbi
> +      - const: parf
> +      - const: config
> +
> +  ranges:
> +    maxItems: 2
> +
> +  interrupts:
> +    items:
> +      - description: MSI interrupts
> +
> +  interrupt-names:
> +    const: msi
> +
> +  "#interrupt-cells":

In pci-bus.yaml, so you can drop.

> +    const: 1
> +
> +  interrupt-map-mask:

In pci-bus.yaml, so you can drop.

> +    items:
> +      - description: standard PCI properties to define mapping of PCIe
> +                     interface to interrupt numbers.
> +
> +  interrupt-map:
> +    maxItems: 4
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 7
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 7
> +
> +  resets:
> +    minItems: 1
> +    maxItems: 12
> +
> +  reset-names:
> +    minItems: 1
> +    maxItems: 12
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  vdda-supply:
> +    description: phandle to power supply
> +
> +  vdda_phy-supply:
> +    description: phandle to the power supply to PHY
> +
> +  vdda_refclk-supply:
> +    description: phandle to power supply for ref clock generator
> +
> +  vddpe-3v3-supply:
> +    description: PCIe endpoint power supply
> +
> +  phys:
> +    maxItems: 1
> +    items:
> +      - description: phandle to the PHY block

Can drop 'items'.

With those fixed,

Reviewed-by: Rob Herring <robh@xxxxxxxxxx>