In the current code, we can not see the PCI info after fixup which is correct to reflect the reality, it is better to move pci_info() after pci_fixup_device() in pci_setup_device(). Signed-off-by: Tiezhu Yang <yangtiezhu@xxxxxxxxxxx> --- drivers/pci/probe.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 2f66988..7c046aed 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1802,9 +1802,6 @@ int pci_setup_device(struct pci_dev *dev) dev->revision = class & 0xff; dev->class = class >> 8; /* upper 3 bytes */ - pci_info(dev, "[%04x:%04x] type %02x class %#08x\n", - dev->vendor, dev->device, dev->hdr_type, dev->class); - if (pci_early_dump) early_dump_pci_device(dev); @@ -1822,6 +1819,9 @@ int pci_setup_device(struct pci_dev *dev) /* Early fixups, before probing the BARs */ pci_fixup_device(pci_fixup_early, dev); + pci_info(dev, "[%04x:%04x] type %02x class %#08x\n", + dev->vendor, dev->device, dev->hdr_type, dev->class); + /* Device class may be changed after fixup */ class = dev->class >> 8; -- 2.1.0
