One more regulator is required to turn on the external oscillator populated on the iMX6QP SABRESD board. Add another regulator to enable PCIe on iMX6QP SABRESD board. Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx> --- drivers/pci/controller/dwc/pci-imx6.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 8f08ae53f53e..9e1563601835 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -81,6 +81,7 @@ struct imx6_pcie { u32 tx_swing_low; int link_gen; struct regulator *vpcie; + struct regulator *vepdev; void __iomem *phy_base; /* power domain for pcie */ @@ -507,6 +508,14 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) return; } } + if (imx6_pcie->vepdev && !regulator_is_enabled(imx6_pcie->vepdev)) { + ret = regulator_enable(imx6_pcie->vepdev); + if (ret) { + dev_err(dev, "failed to enable vepdev regulator: %d\n", + ret); + goto err_pcie_vepdev; + } + } ret = clk_prepare_enable(imx6_pcie->pcie_phy); if (ret) { @@ -595,6 +604,13 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie) err_pcie_bus: clk_disable_unprepare(imx6_pcie->pcie_phy); err_pcie_phy: + if (imx6_pcie->vepdev && regulator_is_enabled(imx6_pcie->vepdev) > 0) { + ret = regulator_disable(imx6_pcie->vepdev); + if (ret) + dev_err(dev, "failed to disable vepdev regulator: %d\n", + ret); + } +err_pcie_vepdev: if (imx6_pcie->vpcie && regulator_is_enabled(imx6_pcie->vpcie) > 0) { ret = regulator_disable(imx6_pcie->vpcie); if (ret) @@ -1178,6 +1194,12 @@ static int imx6_pcie_probe(struct platform_device *pdev) return PTR_ERR(imx6_pcie->vpcie); imx6_pcie->vpcie = NULL; } + imx6_pcie->vepdev = devm_regulator_get_optional(&pdev->dev, "vepdev"); + if (IS_ERR(imx6_pcie->vepdev)) { + if (PTR_ERR(imx6_pcie->vepdev) != -ENODEV) + return PTR_ERR(imx6_pcie->vepdev); + imx6_pcie->vepdev = NULL; + } platform_set_drvdata(pdev, imx6_pcie); -- 2.17.1