[RFC PATCH 19/35] atm: Change PCIBIOS_SUCCESSFUL to 0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In reference to the PCI spec (Chapter 2), PCIBIOS* is an x86 concept.
Their scope should be limited within arch/x86.

Change all PCIBIOS_SUCCESSFUL to 0

Signed-off-by: "Saheed O. Bolarinwa" <refactormyself@xxxxxxxxx>
---
 drivers/atm/iphase.c | 4 ++--
 drivers/atm/lanai.c  | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 8c7a996d1f16..b01cc491540d 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2296,12 +2296,12 @@ static int reset_sar(struct atm_dev *dev)
 	iadev = INPH_IA_DEV(dev);  
 	for(i=0; i<64; i++)  
 	  if ((error = pci_read_config_dword(iadev->pci,  
-				i*4, &pci[i])) != PCIBIOS_SUCCESSFUL)  
+				i*4, &pci[i])) != 0)
   	      return error;  
 	writel(0, iadev->reg+IPHASE5575_EXT_RESET);  
 	for(i=0; i<64; i++)  
 	  if ((error = pci_write_config_dword(iadev->pci,  
-					i*4, pci[i])) != PCIBIOS_SUCCESSFUL)  
+					i*4, pci[i])) != 0)
 	    return error;  
 	udelay(5);  
 	return 0;  
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 645a6bc1df88..2b82ae30dd74 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -1098,7 +1098,7 @@ static void pcistatus_check(struct lanai_dev *lanai, int clearonly)
 	u16 s;
 	int result;
 	result = pci_read_config_word(lanai->pci, PCI_STATUS, &s);
-	if (result != PCIBIOS_SUCCESSFUL) {
+	if (result != 0) {
 		printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "
 		    "%d\n", lanai->number, result);
 		return;
@@ -1109,7 +1109,7 @@ static void pcistatus_check(struct lanai_dev *lanai, int clearonly)
 	if (s == 0)
 		return;
 	result = pci_write_config_word(lanai->pci, PCI_STATUS, s);
-	if (result != PCIBIOS_SUCCESSFUL)
+	if (result != 0)
 		printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: "
 		    "%d\n", lanai->number, result);
 	if (clearonly)
@@ -1949,7 +1949,7 @@ static int lanai_pci_start(struct lanai_dev *lanai)
 		return result;
 	/* Set latency timer to zero as per lanai docs */
 	result = pci_write_config_byte(pci, PCI_LATENCY_TIMER, 0);
-	if (result != PCIBIOS_SUCCESSFUL) {
+	if (result != 0) {
 		printk(KERN_ERR DEV_LABEL "(itf %d): can't write "
 		    "PCI_LATENCY_TIMER: %d\n", lanai->number, result);
 		return -EINVAL;
-- 
2.18.2




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux