> -----Original Message-----
> From: Diana Madalina Craciun (OSS) <diana.craciun@xxxxxxxxxxx>
> Sent: Thursday, July 9, 2020 4:17 PM
> To: Makarand Pawagi <makarand.pawagi@xxxxxxx>; Laurentiu Tudor
> <laurentiu.tudor@xxxxxxx>; Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx;
> linux-acpi@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> pci@xxxxxxxxxxxxxxx; Rob Herring <robh+dt@xxxxxxxxxx>; Rafael J. Wysocki
> <rjw@xxxxxxxxxxxxx>; Joerg Roedel <joro@xxxxxxxxxx>; Hanjun Guo
> <guohanjun@xxxxxxxxxx>; Bjorn Helgaas <bhelgaas@xxxxxxxxxx>; Sudeep
> Holla <sudeep.holla@xxxxxxx>; Robin Murphy <robin.murphy@xxxxxxx>;
> Catalin Marinas <catalin.marinas@xxxxxxx>; Will Deacon <will@xxxxxxxxxx>;
> Marc Zyngier <maz@xxxxxxxxxx>
> Subject: Re: [EXT] Re: [PATCH v2 12/12] bus: fsl-mc: Add ACPI support for fsl-mc
>
> On 7/9/2020 1:37 PM, Makarand Pawagi wrote:
> >
> >> -----Original Message-----
> >> From: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
> >> Sent: Thursday, July 9, 2020 3:45 PM
> >> To: Makarand Pawagi <makarand.pawagi@xxxxxxx>; Lorenzo Pieralisi
> >> <lorenzo.pieralisi@xxxxxxx>
> >> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Diana Madalina Craciun
> >> (OSS) <diana.craciun@xxxxxxxxxxx>; iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx;
> >> linux- acpi@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> >> linux-pci@xxxxxxxxxxxxxxx; Rob Herring <robh+dt@xxxxxxxxxx>; Rafael
> >> J. Wysocki <rjw@xxxxxxxxxxxxx>; Joerg Roedel <joro@xxxxxxxxxx>;
> >> Hanjun Guo <guohanjun@xxxxxxxxxx>; Bjorn Helgaas
> >> <bhelgaas@xxxxxxxxxx>; Sudeep Holla <sudeep.holla@xxxxxxx>; Robin
> >> Murphy <robin.murphy@xxxxxxx>; Catalin Marinas
> >> <catalin.marinas@xxxxxxx>; Will Deacon <will@xxxxxxxxxx>; Marc
> >> Zyngier <maz@xxxxxxxxxx>
> >> Subject: Re: [EXT] Re: [PATCH v2 12/12] bus: fsl-mc: Add ACPI support
> >> for fsl-mc
> >>
> >>
> >>
> >> On 7/9/2020 12:26 PM, Makarand Pawagi wrote:
> >>>
> >>>> -----Original Message-----
> >>>> From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
> >>>> Sent: Thursday, July 9, 2020 2:50 PM
> >>>> To: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
> >>>> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Makarand Pawagi
> >>>> <makarand.pawagi@xxxxxxx>; Diana Madalina Craciun (OSS)
> >>>> <diana.craciun@xxxxxxxxxxx>; iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx;
> >>>> linux- acpi@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> >>>> linux-pci@xxxxxxxxxxxxxxx; Rob Herring <robh+dt@xxxxxxxxxx>; Rafael
> >>>> J. Wysocki <rjw@xxxxxxxxxxxxx>; Joerg Roedel <joro@xxxxxxxxxx>;
> >>>> Hanjun Guo <guohanjun@xxxxxxxxxx>; Bjorn Helgaas
> >>>> <bhelgaas@xxxxxxxxxx>; Sudeep Holla <sudeep.holla@xxxxxxx>; Robin
> >>>> Murphy <robin.murphy@xxxxxxx>; Catalin Marinas
> >>>> <catalin.marinas@xxxxxxx>; Will Deacon <will@xxxxxxxxxx>; Marc
> >>>> Zyngier <maz@xxxxxxxxxx>
> >>>> Subject: [EXT] Re: [PATCH v2 12/12] bus: fsl-mc: Add ACPI support
> >>>> for fsl-mc
> >>>>
> >>>> Caution: EXT Email
> >>>>
> >>>> On Wed, Jul 01, 2020 at 07:55:28PM +0300, Laurentiu Tudor wrote:
> >>>>>
> >>>>> On 6/19/2020 11:20 AM, Lorenzo Pieralisi wrote:
> >>>>>> From: Makarand Pawagi <makarand.pawagi@xxxxxxx>
> >>>>>>
> >>>>>> Add ACPI support in the fsl-mc driver. Driver parses MC DSDT
> >>>>>> table to extract memory and other resources.
> >>>>>>
> >>>>>> Interrupt (GIC ITS) information is extracted from the MADT table
> >>>>>> by drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c.
> >>>>>>
> >>>>>> IORT table is parsed to configure DMA.
> >>>>>>
> >>>>>> Signed-off-by: Makarand Pawagi <makarand.pawagi@xxxxxxx>
> >>>>>> Signed-off-by: Diana Craciun <diana.craciun@xxxxxxxxxxx>
> >>>>>> Signed-off-by: Laurentiu Tudor <laurentiu.tudor@xxxxxxx>
> >>>>>> ---
> >>>>>> drivers/bus/fsl-mc/fsl-mc-bus.c | 73 ++++++++++++----
> >>>>>> drivers/bus/fsl-mc/fsl-mc-msi.c | 37 +++++----
> >>>>>> drivers/irqchip/irq-gic-v3-its-fsl-mc-msi.c | 92
> >>>>>> ++++++++++++++++-----
> >>>>>> 3 files changed, 150 insertions(+), 52 deletions(-)
> >>>>>>
> >>>>>> diff --git a/drivers/bus/fsl-mc/fsl-mc-bus.c
> >>>>>> b/drivers/bus/fsl-mc/fsl-mc-bus.c index
> >>>>>> 824ff77bbe86..324d49d6df89
> >>>>>> 100644
> >>>>>> --- a/drivers/bus/fsl-mc/fsl-mc-bus.c
> >>>>>> +++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
> >>>>>> @@ -18,6 +18,8 @@
> >>>>>> #include <linux/bitops.h>
> >>>>>> #include <linux/msi.h>
> >>>>>> #include <linux/dma-mapping.h>
> >>>>>> +#include <linux/acpi.h>
> >>>>>> +#include <linux/iommu.h>
> >>>>>>
> >>>>>> #include "fsl-mc-private.h"
> >>>>>>
> >>>>>> @@ -38,6 +40,7 @@ struct fsl_mc {
> >>>>>> struct fsl_mc_device *root_mc_bus_dev;
> >>>>>> u8 num_translation_ranges;
> >>>>>> struct fsl_mc_addr_translation_range *translation_ranges;
> >>>>>> + void *fsl_mc_regs;
> >>>>>> };
> >>>>>>
> >>>>>> /**
> >>>>>> @@ -56,6 +59,10 @@ struct fsl_mc_addr_translation_range {
> >>>>>> phys_addr_t start_phys_addr;
> >>>>>> };
> >>>>>>
> >>>>>> +#define FSL_MC_FAPR 0x28
> >>>>>> +#define MC_FAPR_PL BIT(18)
> >>>>>> +#define MC_FAPR_BMT BIT(17)
> >>>>>> +
> >>>>>> /**
> >>>>>> * fsl_mc_bus_match - device to driver matching callback
> >>>>>> * @dev: the fsl-mc device to match against @@ -124,7 +131,10
> >>>>>> @@ static int fsl_mc_dma_configure(struct device *dev)
> >>>>>> while (dev_is_fsl_mc(dma_dev))
> >>>>>> dma_dev = dma_dev->parent;
> >>>>>>
> >>>>>> - return of_dma_configure_id(dev, dma_dev->of_node, 0, &input_id);
> >>>>>> + if (dev_of_node(dma_dev))
> >>>>>> + return of_dma_configure_id(dev, dma_dev->of_node, 0,
> >>>>>> + &input_id);
> >>>>>> +
> >>>>>> + return acpi_dma_configure_id(dev, DEV_DMA_COHERENT,
> >>>>>> + &input_id);
> >>>>>> }
> >>>>>>
> >>>>>> static ssize_t modalias_show(struct device *dev, struct
> >>>>>> device_attribute *attr, @@ -865,8 +875,11 @@ static int
> >>>> fsl_mc_bus_probe(struct platform_device *pdev)
> >>>>>> struct fsl_mc_io *mc_io = NULL;
> >>>>>> int container_id;
> >>>>>> phys_addr_t mc_portal_phys_addr;
> >>>>>> - u32 mc_portal_size;
> >>>>>> - struct resource res;
> >>>>>> + u32 mc_portal_size, mc_stream_id;
> >>>>>> + struct resource *plat_res;
> >>>>>> +
> >>>>>> + if (!iommu_present(&fsl_mc_bus_type))
> >>>>>> + return -EPROBE_DEFER;
> >>>>>>
> >>>>>> mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL);
> >>>>>> if (!mc)
> >>>>>> @@ -874,19 +887,33 @@ static int fsl_mc_bus_probe(struct
> >>>>>> platform_device *pdev)
> >>>>>>
> >>>>>> platform_set_drvdata(pdev, mc);
> >>>>>>
> >>>>>> + plat_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> >>>>>> + mc->fsl_mc_regs = devm_ioremap_resource(&pdev->dev, plat_res);
> >>>>>> + if (IS_ERR(mc->fsl_mc_regs))
> >>>>>> + return PTR_ERR(mc->fsl_mc_regs);
> >>>>>> +
> >>>>>> + if (IS_ENABLED(CONFIG_ACPI) && !dev_of_node(&pdev->dev)) {
> >>>>>> + mc_stream_id = readl(mc->fsl_mc_regs + FSL_MC_FAPR);
> >>>>>> + /*
> >>>>>> + * HW ORs the PL and BMT bit, places the result in bit 15 of
> >>>>>> + * the StreamID and ORs in the ICID. Calculate it accordingly.
> >>>>>> + */
> >>>>>> + mc_stream_id = (mc_stream_id & 0xffff) |
> >>>>>> + ((mc_stream_id & (MC_FAPR_PL | MC_FAPR_BMT)) ?
> >>>>>> + 0x4000 : 0);
> >>>>>> + error = acpi_dma_configure_id(&pdev->dev,
> DEV_DMA_COHERENT,
> >>>>>> + &mc_stream_id);
> >>>>>> + if (error)
> >>>>>> + dev_warn(&pdev->dev, "failed to configure dma: %d.\n",
> >>>>>> + error);
> >>>>>> + }
> >>>>>> +
> >>>>>> /*
> >>>>>> * Get physical address of MC portal for the root DPRC:
> >>>>>> */
> >>>>>> - error = of_address_to_resource(pdev->dev.of_node, 0, &res);
> >>>>>> - if (error < 0) {
> >>>>>> - dev_err(&pdev->dev,
> >>>>>> - "of_address_to_resource() failed for %pOF\n",
> >>>>>> - pdev->dev.of_node);
> >>>>>> - return error;
> >>>>>> - }
> >>>>>> -
> >>>>>> - mc_portal_phys_addr = res.start;
> >>>>>> - mc_portal_size = resource_size(&res);
> >>>>>> + plat_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >>>>>> + mc_portal_phys_addr = plat_res->start;
> >>>>>> + mc_portal_size = resource_size(plat_res);
> >>>>>> error = fsl_create_mc_io(&pdev->dev, mc_portal_phys_addr,
> >>>>>> mc_portal_size, NULL,
> >>>>>> FSL_MC_IO_ATOMIC_CONTEXT_PORTAL,
> >>>>>> &mc_io); @@ -903,11 +930,13 @@ static int fsl_mc_bus_probe(struct
> >>>> platform_device *pdev)
> >>>>>> dev_info(&pdev->dev, "MC firmware version: %u.%u.%u\n",
> >>>>>> mc_version.major, mc_version.minor,
> >>>>>> mc_version.revision);
> >>>>>>
> >>>>>> - error = get_mc_addr_translation_ranges(&pdev->dev,
> >>>>>> - &mc->translation_ranges,
> >>>>>> - &mc->num_translation_ranges);
> >>>>>> - if (error < 0)
> >>>>>> - goto error_cleanup_mc_io;
> >>>>>> + if (dev_of_node(&pdev->dev)) {
> >>>>>> + error = get_mc_addr_translation_ranges(&pdev->dev,
> >>>>>> + &mc->translation_ranges,
> >>>>>> + &mc->num_translation_ranges);
> >>>>>> + if (error < 0)
> >>>>>> + goto error_cleanup_mc_io;
> >>>>>> + }
> >>>>>>
> >>>>>> error = dprc_get_container_id(mc_io, 0, &container_id);
> >>>>>> if (error < 0) {
> >>>>>> @@ -934,6 +963,7 @@ static int fsl_mc_bus_probe(struct
> >>>>>> platform_device
> >>>> *pdev)
> >>>>>> goto error_cleanup_mc_io;
> >>>>>>
> >>>>>> mc->root_mc_bus_dev = mc_bus_dev;
> >>>>>> + mc_bus_dev->dev.fwnode = pdev->dev.fwnode;
> >>>>> Makarand, this looks a bit weird. Is there really a reason for it?
> >>>> Can you clarify please so that we can reach a conclusion on this matter ?
> >>>>
> >>> Laurentiu, can you clarify what exactly is the doubt here? Are you
> >>> asking about
> >> fwnode assignment from pdev to mc_bus_dev?
> >> Yes. I remember that a while ago I tested without this fwnode
> >> assignment and didn't encounter any issues. Maybe we can just drop it?
> > Did you tested with PHY changes? Because this is needed for MAC driver,
> where it needs the mc bus node.
>
> Maybe it worth a comment or maybe have it in a different patch?
>
Since this change is needed for ACPI case and this is ACPI support case,
I feel we should have this change in this patch only instead of separate patch.
> Thanks,
> Diana
>
> >
> >> ---
> >> Best Regards, Laurentiu
