On Tuesday 07 July 2020 14:53:11 Lorenzo Pieralisi wrote: > On Fri, Jun 19, 2020 at 12:56:18PM +0200, Pali Rohár wrote: > > Hello Lorenzo! Could you please review this patch? > > > > On Monday 01 June 2020 15:03:15 Pali Rohár wrote: > > > Most callers of config read do not check for return value. But most of the > > > ones that do, checks for error indication in 'val' variable. > > > > > > This patch updates error handling in advk_pcie_rd_conf() function. If PIO > > > transfer fails then 'val' variable is set to 0xffffffff which indicates > > > failture. > > > > > > Signed-off-by: Pali Rohár <pali@xxxxxxxxxx> > > > > I should add credit for Bjorn as he found this issue > > Could you provide a lore archive link to the relevant > discussion please ? I will apply it then. Hello Lorenzo! Here is link to the Bjorn's email: https://lore.kernel.org/linux-pci/20200528162604.GA323482@bjorn-Precision-5520/ > Lorenzo > > > Reported-by: Bjorn Helgaas <helgaas@xxxxxxxxxx> > > > > > --- > > > drivers/pci/controller/pci-aardvark.c | 4 +++- > > > 1 file changed, 3 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c > > > index 53a4cfd7d377..783a7f1f2c44 100644 > > > --- a/drivers/pci/controller/pci-aardvark.c > > > +++ b/drivers/pci/controller/pci-aardvark.c > > > @@ -691,8 +691,10 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn, > > > advk_writel(pcie, 1, PIO_START); > > > > > > ret = advk_pcie_wait_pio(pcie); > > > - if (ret < 0) > > > + if (ret < 0) { > > > + *val = 0xffffffff; > > > return PCIBIOS_SET_FAILED; > > > + } > > > > > > advk_pcie_check_pio_status(pcie); > > > > > > -- > > > 2.20.1 > > >