Re: [PATCH v3] PCI: Lock the pci_cfg_wait queue for the consistency of data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jun 28, 2020 at 12:18:10PM +0800, Xiang Zheng wrote:
> On 2020/6/26 7:24, Bjorn Helgaas wrote:
> > On Wed, Jun 24, 2020 at 06:23:09PM -0500, Bjorn Helgaas wrote:
> >> On Tue, Dec 10, 2019 at 11:15:27AM +0800, Xiang Zheng wrote:
> >>> 7ea7e98fd8d0 ("PCI: Block on access to temporarily unavailable pci
> >>> device") suggests that the "pci_lock" is sufficient, and all the
> >>> callers of pci_wait_cfg() are wrapped with the "pci_lock".
> >>>
> >>> However, since the commit cdcb33f98244 ("PCI: Avoid possible deadlock on
> >>> pci_lock and p->pi_lock") merged, the accesses to the pci_cfg_wait queue
> >>> are not safe anymore. This would cause kernel panic in a very low chance
> >>> (See more detailed information from the below link). A "pci_lock" is
> >>> insufficient and we need to hold an additional queue lock while read/write
> >>> the wait queue.
> >>>
> >>> So let's use the add_wait_queue()/remove_wait_queue() instead of
> >>> __add_wait_queue()/__remove_wait_queue(). Also move the wait queue
> >>> functionality around the "schedule()" function to avoid reintroducing
> >>> the deadlock addressed by "cdcb33f98244".
> >>
> >> I see that add_wait_queue() acquires the wq_head->lock, while
> >> __add_wait_queue() does not.
> >>
> >> But I don't understand why the existing pci_lock is insufficient.  
> >> pci_cfg_wait is only used in pci_wait_cfg() and
> >> pci_cfg_access_unlock().
> >>
> >> In pci_wait_cfg(), both __add_wait_queue() and __remove_wait_queue()
> >> are called while holding pci_lock, so that doesn't seem like the
> >> problem.
> >>
> >> In pci_cfg_access_unlock(), we have:
> >>
> >>   pci_cfg_access_unlock
> >>     wake_up_all(&pci_cfg_wait)
> >>       __wake_up(&pci_cfg_wait, ...)
> >>         __wake_up_common_lock(&pci_cfg_wait, ...)
> >> 	  spin_lock(&pci_cfg_wait->lock)
> >> 	  __wake_up_common(&pci_cfg_wait, ...)
> >> 	    list_for_each_entry_safe_from(...)
> >> 	      list_add_tail(...)                <-- problem?
> >> 	  spin_unlock(&pci_cfg_wait->lock)
> >>
> >> Is the problem that the wake_up_all() modifies the pci_cfg_wait list
> >> without holding pci_lock?
> >>
> >> If so, I don't quite see how the patch below fixes it.  Oh, wait,
> >> maybe I do ... by using add_wait_queue(), we protect the list using
> >> the *same* lock used by __wake_up_common_lock.  Is that it?
> > 
> > Any reaction to the following?  Certainly not as optimized, but also a
> > little less magic and more in the mainstream of wait_event/wake_up
> > usage.
> > 
> > I don't claim any real wait queue knowledge and haven't tested it.
> > There are only a handful of __add_wait_queue() users compared with
> > over 1600 users of wait_event() and variants, and I don't like being
> > such a special case.
> 
> I think the following patch is OK, even though I prefer mine. :)

Possibility A:

        do {
                set_current_state(TASK_UNINTERRUPTIBLE);
                raw_spin_unlock_irq(&pci_lock);
                add_wait_queue(&pci_cfg_wait, &wait);
                schedule();
                remove_wait_queue(&pci_cfg_wait, &wait);
                raw_spin_lock_irq(&pci_lock);
        } while (dev->block_cfg_access);

Possibility B:

        do {
                raw_spin_unlock_irq(&pci_lock);
                wait_event(pci_cfg_wait, !dev->block_cfg_access);
                raw_spin_lock_irq(&pci_lock);
        } while (dev->block_cfg_access);

I think both ways probably work.  

I prefer B because there's less chance for error -- it requires less
knowledge of the internals of wait/wake_up and we don't have to worry
about the ordering of set_current_state(), raw_spin_unlock_irq(),
add_wait_queue(), schedule(), and remove_wait_queue().

I really don't know much about wait queues, so I'm interested in why
you prefer A.

> I can test your patch on my testcase(with hacked 300ms delay before
> "curr->func" in __wake_up_common()). And if James has more efficient
> testcase or measure for this problem, then go with James.

That would be great, thank you!  Let me know how it goes.

> > diff --git a/drivers/pci/access.c b/drivers/pci/access.c
> > index 79c4a2ef269a..7c2222bddbff 100644
> > --- a/drivers/pci/access.c
> > +++ b/drivers/pci/access.c
> > @@ -205,16 +205,11 @@ static DECLARE_WAIT_QUEUE_HEAD(pci_cfg_wait);
> >  
> >  static noinline void pci_wait_cfg(struct pci_dev *dev)
> >  {
> > -	DECLARE_WAITQUEUE(wait, current);
> > -
> > -	__add_wait_queue(&pci_cfg_wait, &wait);
> >  	do {
> > -		set_current_state(TASK_UNINTERRUPTIBLE);
> >  		raw_spin_unlock_irq(&pci_lock);
> > -		schedule();
> > +		wait_event(pci_cfg_wait, !dev->block_cfg_access);
> >  		raw_spin_lock_irq(&pci_lock);
> >  	} while (dev->block_cfg_access);
> > -	__remove_wait_queue(&pci_cfg_wait, &wait);
> >  }
> >  
> >  /* Returns 0 on success, negative values indicate error. */
> > 
> > .
> > 
> 
> -- 
> Thanks,
> Xiang
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux