This contains multiple fix for PCIe qcom driver. Some optional reset and clocks were missing. Fix a problem with no PARF programming that cause kernel lock on load. Add support to force gen 1 speed if needed. (due to hardware limitation) Add ipq8064 rev 2 support that use a different tx termination offset. v6: * Replace custom define * Move define not used in 07 to 08 v5: * Split PCI: qcom: Add ipq8064 rev2 variant and set tx term offset v4: * Fix grammar error across all patch subject * Use bulk api for clks * Program PARF only in ipq8064 SoC * Program tx term only in ipq8064 SoC * Drop configurable tx-dempth rx-eq * Make added clk optional v3: * Fix check reported by checkpatch --strict * Rename force_gen1 to gen v2: * Drop iATU programming (already done in pcie init) * Use max-link-speed instead of force-gen1 custom definition * Drop MRRS to 256B (Can't find a realy reason why this was suggested) * Introduce a new variant for different revision of ipq8064 Abhishek Sahu (1): PCI: qcom: Change duplicate PCI reset to phy reset Ansuel Smith (10): PCI: qcom: Add missing ipq806x clocks in PCIe driver dt-bindings: PCI: qcom: Add missing clks PCI: qcom: Add missing reset for ipq806x dt-bindings: PCI: qcom: Add ext reset PCI: qcom: Use bulk clk api and assert on error PCI: qcom: Define some PARF params needed for ipq8064 SoC PCI: qcom: Add support for tx term offset for rev 2.1.0 PCI: qcom: Add ipq8064 rev2 variant dt-bindings: PCI: qcom: Add ipq8064 rev 2 variant PCI: qcom: Replace define with standard value Sham Muthayyan (1): PCI: qcom: Add Force GEN1 support .../devicetree/bindings/pci/qcom,pcie.txt | 15 +- drivers/pci/controller/dwc/pcie-qcom.c | 186 +++++++++++------- 2 files changed, 128 insertions(+), 73 deletions(-) -- 2.25.1
