RE: [PATCH v8 0/2] ACPI / APEI: Add support to notify the vendor specific HW errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Please ignore this patch set. Resending soon.

Thanks,
Shiju

>-----Original Message-----
>From: Shiju Jose
>Sent: 29 May 2020 18:39
>To: linux-acpi@xxxxxxxxxxxxxxx; linux-pci@xxxxxxxxxxxxxxx; linux-
>kernel@xxxxxxxxxxxxxxx; rjw@xxxxxxxxxxxxx; bp@xxxxxxxxx;
>james.morse@xxxxxxx; helgaas@xxxxxxxxxx; lenb@xxxxxxxxxx;
>tony.luck@xxxxxxxxx; dan.carpenter@xxxxxxxxxx;
>gregkh@xxxxxxxxxxxxxxxxxxx; zhangliguang@xxxxxxxxxxxxxxxxx;
>tglx@xxxxxxxxxxxxx
>Cc: Shiju Jose <shiju.jose@xxxxxxxxxx>; Linuxarm <linuxarm@xxxxxxxxxx>;
>yangyicong <yangyicong@xxxxxxxxxx>
>Subject: [PATCH v8 0/2] ACPI / APEI: Add support to notify the vendor
>specific HW errors
>
>Presently the vendor drivers are unable to do the recovery for the vendor
>specific recoverable HW errors because APEI driver does not support
>reporting the error to the vendor drivers.
>
>patch set
>1. add new interface to the APEI driver for reporting the
>   vendor specific non-fatal HW errors to the drivers.
>
>2. add driver to handle HiSilicon hip PCIe controller's errors.
>
>V8:
>1. Removed reporting the standard errors through the interface
>   because of the conflict with the changes in the
>   memory error handling path.
>2. Fix comments by Dan Carpenter.
>
>V7:
>1. Add changes in the APEI driver suggested by Borislav Petkov, for
>   queuing up all the non-fatal HW errors to the work queue and
>   notify the registered kernel drivers from the bottom half using
>   blocking notifier, common interface for both standard and
>   vendor-spcific errors.
>2. Fix for further feedbacks in v5 HIP PCIe error handler driver
>   by Bjorn Helgaas.
>
>V6:
>1. Fix few changes in the patch subject line suggested by Bjorn Helgaas.
>
>V5:
>1. Fix comments from James Morse.
>1.1 Changed the notification method to use the atomic_notifier_chain.
>1.2 Add the error handled status for the user space.
>
>V4:
>1. Fix for the following smatch warning in the PCIe error driver,
>   reported by kbuild test robot<lkp@xxxxxxxxx>:
>   warn: should '((((1))) << (9 + i))' be a 64 bit type?
>   if (err->val_bits & BIT(HISI_PCIE_LOCAL_VALID_ERR_MISC + i))
>	^^^ This should be BIT_ULL() because it goes up to 9 + 32.
>
>V3:
>1. Fix the comments from Bjorn Helgaas.
>
>V2:
>1. Changes in the HiSilicon PCIe controller's error handling driver
>   for the comments from Bjorn Helgaas.
>
>2. Changes in the APEI interface to support reporting the vendor error
>   for module with multiple devices, but use the same section type.
>   In the error handler will use socket id/sub module id etc to distinguish
>   the device.
>
>V1:
>1. Fix comments from James Morse.
>
>2. add driver to handle HiSilicon hip08 PCIe controller's errors,
>   which is an application of the above interface.
>
>Shiju Jose (1):
>  ACPI / APEI: Add support to notify the vendor specific HW errors
>
>Yicong Yang (1):
>  PCI: hip: Add handling of HiSilicon HIP PCIe controller errors
>
> drivers/acpi/apei/ghes.c                 | 126 ++++++++-
> drivers/pci/controller/Kconfig           |   8 +
> drivers/pci/controller/Makefile          |   1 +
> drivers/pci/controller/pcie-hisi-error.c | 321 +++++++++++++++++++++++
> include/acpi/ghes.h                      |  28 ++
> 5 files changed, 483 insertions(+), 1 deletion(-)  create mode 100644
>drivers/pci/controller/pcie-hisi-error.c
>
>--
>2.17.1
>




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux