Re: [PATCH v4 03/14] PCI: cadence: Add support to use custom read and write accessors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On 5/22/2020 3:47 AM, Rob Herring wrote:
> On Thu, May 21, 2020 at 7:33 AM Kishon Vijay Abraham I <kishon@xxxxxx> wrote:
>>
>> Hi Rob,
>>
>> On 5/21/2020 3:37 AM, Rob Herring wrote:
>>> On Wed, May 06, 2020 at 08:44:18PM +0530, Kishon Vijay Abraham I wrote:
>>>> Add support to use custom read and write accessors. Platforms that
>>>> don't support half word or byte access or any other constraint
>>>> while accessing registers can use this feature to populate custom
>>>> read and write accessors. These custom accessors are used for both
>>>> standard register access and configuration space register access of
>>>> the PCIe host bridge.
>>>>
>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>>>> ---
>>>>  drivers/pci/controller/cadence/pcie-cadence.h | 107 +++++++++++++++---
>>>>  1 file changed, 94 insertions(+), 13 deletions(-)
>>>
>>> Actually, take back my R-by...
>>>
>>>>
>>>> diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
>>>> index df14ad002fe9..70b6b25153e8 100644
>>>> --- a/drivers/pci/controller/cadence/pcie-cadence.h
>>>> +++ b/drivers/pci/controller/cadence/pcie-cadence.h
>>>> @@ -223,6 +223,11 @@ enum cdns_pcie_msg_routing {
>>>>      MSG_ROUTING_GATHER,
>>>>  };
>>>>
>>>> +struct cdns_pcie_ops {
>>>> +    u32     (*read)(void __iomem *addr, int size);
>>>> +    void    (*write)(void __iomem *addr, int size, u32 value);
>>>> +};
>>>> +
>>>>  /**
>>>>   * struct cdns_pcie - private data for Cadence PCIe controller drivers
>>>>   * @reg_base: IO mapped register base
>>>> @@ -239,7 +244,7 @@ struct cdns_pcie {
>>>>      int                     phy_count;
>>>>      struct phy              **phy;
>>>>      struct device_link      **link;
>>>> -    const struct cdns_pcie_common_ops *ops;
>>>> +    const struct cdns_pcie_ops *ops;
>>>>  };
>>>>
>>>>  /**
>>>> @@ -299,69 +304,145 @@ struct cdns_pcie_ep {
>>>>  /* Register access */
>>>>  static inline void cdns_pcie_writeb(struct cdns_pcie *pcie, u32 reg, u8 value)
>>>>  {
>>>> -    writeb(value, pcie->reg_base + reg);
>>>> +    void __iomem *addr = pcie->reg_base + reg;
>>>> +
>>>> +    if (pcie->ops && pcie->ops->write) {
>>>> +            pcie->ops->write(addr, 0x1, value);
>>>> +            return;
>>>> +    }
>>>> +
>>>> +    writeb(value, addr);
>>>>  }
>>>>
>>>>  static inline void cdns_pcie_writew(struct cdns_pcie *pcie, u32 reg, u16 value)
>>>>  {
>>>> -    writew(value, pcie->reg_base + reg);
>>>> +    void __iomem *addr = pcie->reg_base + reg;
>>>> +
>>>> +    if (pcie->ops && pcie->ops->write) {
>>>> +            pcie->ops->write(addr, 0x2, value);
>>>> +            return;
>>>> +    }
>>>> +
>>>> +    writew(value, addr);
>>>>  }
>>>
>>> cdns_pcie_writeb and cdns_pcie_writew are used, so remove them.
>>>
>>>>
>>>>  static inline void cdns_pcie_writel(struct cdns_pcie *pcie, u32 reg, u32 value)
>>>>  {
>>>> -    writel(value, pcie->reg_base + reg);
>>>> +    void __iomem *addr = pcie->reg_base + reg;
>>>> +
>>>> +    if (pcie->ops && pcie->ops->write) {
>>>> +            pcie->ops->write(addr, 0x4, value);
>>>> +            return;
>>>> +    }
>>>> +
>>>> +    writel(value, addr);
>>>
>>> writel isn't broken for you, so you don't need this either.
>>>
>>>>  }
>>>>
>>>>  static inline u32 cdns_pcie_readl(struct cdns_pcie *pcie, u32 reg)
>>>>  {
>>>> -    return readl(pcie->reg_base + reg);
>>>> +    void __iomem *addr = pcie->reg_base + reg;
>>>> +
>>>> +    if (pcie->ops && pcie->ops->read)
>>>> +            return pcie->ops->read(addr, 0x4);
>>>> +
>>>> +    return readl(addr);
>>>
>>> And neither is readl.
>>
>> Sure, I'll remove all the unused functions and avoid using ops for readl and
>> writel.
>>>
>>>>  }
>>>>
>>>>  /* Root Port register access */
>>>>  static inline void cdns_pcie_rp_writeb(struct cdns_pcie *pcie,
>>>>                                     u32 reg, u8 value)
>>>>  {
>>>> -    writeb(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg);
>>>> +    void __iomem *addr = pcie->reg_base + CDNS_PCIE_RP_BASE + reg;
>>>> +
>>>> +    if (pcie->ops && pcie->ops->write) {
>>>> +            pcie->ops->write(addr, 0x1, value);
>>>> +            return;
>>>> +    }
>>>> +
>>>> +    writeb(value, addr);
>>>>  }
>>>>
>>>>  static inline void cdns_pcie_rp_writew(struct cdns_pcie *pcie,
>>>>                                     u32 reg, u16 value)
>>>>  {
>>>> -    writew(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg);
>>>> +    void __iomem *addr = pcie->reg_base + CDNS_PCIE_RP_BASE + reg;
>>>> +
>>>> +    if (pcie->ops && pcie->ops->write) {
>>>> +            pcie->ops->write(addr, 0x2, value);
>>>> +            return;
>>>> +    }
>>>> +
>>>> +    writew(value, addr);
>>>
>>> You removed 2 out of 3 calls to this. I think I'd just make the root
>>> port writes always be 32-bit. It is all just one time init stuff
>>> anyways.
>>>
>>> Either rework the calls to assemble the data into 32-bits or keep these
>>> functions and do the RMW here.
>>
>> The problem with assembling data into 32-bits is we have to read/write with
>> different offsets. We'll give PCI_VENDOR_ID offset for modifying deviceID,
>> PCI_INTERRUPT_LINE for modifying INTERRUPT_PIN which might get non-intuitive.
>> Similarly in endpoint we read and write to MSI_FLAGS (which is at offset 2) we
>> have to directly use MSI capability offset.
>>
>> And doing RMW in the accessors would mean the same RMW op is repeated. So if we
>> just have cdns_pcie_rp_writeb() and cdns_pcie_rp_writew(), the same code will
>> be repeated here twice.
> 
> Why repeated? Just copy what the config accessors do:
> 
> static inline void cdns_pcie_write_sz(u32 val, void __iomem *addr, int size)
> {
>   u32 tmp, mask, where = (unsigned long)addr & 0x3;
> 
>   addr -= where;
> 
>   mask = ~(((1 << (size * 8)) - 1) << (where * 8));
>   tmp = readl(addr) & mask;
>   tmp |= val << (where * 8);
>   writel(tmp, addr);
> }
> 
> /* Root Port register access */
> static inline void cdns_pcie_rp_writeb(struct cdns_pcie *pcie,
>        u32 reg, u8 value)
> {
>   cdns_pcie_write_sz(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg, 1);
> }
> 
> static inline void cdns_pcie_rp_writew(struct cdns_pcie *pcie,
>        u32 reg, u16 value)
> {
>   cdns_pcie_write_sz(value, pcie->reg_base + CDNS_PCIE_RP_BASE + reg, 2);
> }
> 
>>
>> IMHO using ops is a lot cleaner for these cases. IMHO except for removing
>> unused functions and not changing readl/writel, others should use ops.
> 
> Trying to read the DW PCI driver I don't agree...
> 
> Again, unless doing RMW is fundamentally broken (like it is for config
> space at runtime), then you only want to do it on broken h/w and ops
> would be appropriate. It is all mostly one time setup, so doing a few
> extra reads isn't a big deal. If you really care about speed on that,
> probably should use the _relaxed accessor variants.
> 
> I'm being hopeful the Cadence IP doesn't become the mess that DW is.

Okay, I'll remove ops for read/write accessors.

Thanks
Kishon



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux