On Sunday 17 May 2020 17:57:02 Gregory CLEMENT wrote: > Hello, > > > Hello, > > > > On Thu, 30 Apr 2020 10:06:13 +0200 > > Pali Rohár <pali@xxxxxxxxxx> wrote: > > > >> Marek Behún (5): > >> PCI: aardvark: Improve link training > >> PCI: aardvark: Add PHY support > >> dt-bindings: PCI: aardvark: Describe new properties > >> arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function > >> arm64: dts: marvell: armada-37xx: Move PCIe comphy handle property > >> > >> Pali Rohár (7): > >> PCI: aardvark: Train link immediately after enabling training > >> PCI: aardvark: Don't blindly enable ASPM L0s and don't write to > >> read-only register > >> PCI: of: Zero max-link-speed value is invalid > >> PCI: aardvark: Issue PERST via GPIO > >> PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access > >> PCI: aardvark: Replace custom macros by standard linux/pci_regs.h > >> macros > >> arm64: dts: marvell: armada-37xx: Move PCIe max-link-speed property > > > > Thanks a lot for this work. For a number of reasons, I'm less involved > > in Marvell platform support in Linux, but I reviewed your series and > > followed the discussions around it, and I'm happy to give my: > > > > Acked-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx> > > With this acked-by for the series, the reviewed-by from Rob on the > binding and the tested-by, I am pretty confident so I applied the > patches 10, 11 and 12 on mvebu/dt64. > > Thanks, > > Gregory Thank you! Lorenzo, would you now take remaining patches? > > > > > for the whole series. The changes all seem sensible, and have been > > tested by several folks. > > > > Thanks! > > > > Thomas > > -- > > Thomas Petazzoni, CTO, Bootlin > > Embedded Linux and Kernel engineering > > https://bootlin.com > > -- > Gregory Clement, Bootlin > Embedded Linux and Kernel engineering > http://bootlin.com
