On Thu, May 07, 2020 at 01:03:00PM +0800, Wei Hu wrote:
> In the case of kdump, the PCI device was not cleanly shut down
> before the kdump kernel starts. This causes the initial
> attempt of entering D0 state in the kdump kernel to fail with
> invalid device state returned from Hyper-V host.
> When this happens, explicitly call PCI bus exit and retry to
> enter the D0 state.
>
> Signed-off-by: Wei Hu <weh@xxxxxxxxxxxxx>
> ---
> v2: Incorporate review comments from Michael Kelley, Dexuan Cui and
> Bjorn Helgaas
>
> drivers/pci/controller/pci-hyperv.c | 40 +++++++++++++++++++++++++++--
> 1 file changed, 38 insertions(+), 2 deletions(-)
Subject: exceeded 80 chars and commit log needed rewording and
paragraphs rewrapping. I did it this time but please pay attention
to commit log content (and format).
Thanks,
Lorenzo
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index e6fac0187722..92092a47d3af 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -2739,6 +2739,8 @@ static void hv_free_config_window(struct hv_pcibus_device *hbus)
> vmbus_free_mmio(hbus->mem_config->start, PCI_CONFIG_MMIO_LENGTH);
> }
>
> +static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs);
> +
> /**
> * hv_pci_enter_d0() - Bring the "bus" into the D0 power state
> * @hdev: VMBus's tracking struct for this root PCI bus
> @@ -2751,8 +2753,10 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
> struct pci_bus_d0_entry *d0_entry;
> struct hv_pci_compl comp_pkt;
> struct pci_packet *pkt;
> + bool retry = true;
> int ret;
>
> +enter_d0_retry:
> /*
> * Tell the host that the bus is ready to use, and moved into the
> * powered-on state. This includes telling the host which region
> @@ -2779,6 +2783,38 @@ static int hv_pci_enter_d0(struct hv_device *hdev)
> if (ret)
> goto exit;
>
> + /*
> + * In certain case (Kdump) the pci device of interest was
> + * not cleanly shut down and resource is still held on host
> + * side, the host could return invalid device status.
> + * We need to explicitly request host to release the resource
> + * and try to enter D0 again.
> + */
> + if (comp_pkt.completion_status < 0 && retry) {
> + retry = false;
> +
> + dev_err(&hdev->device, "Retrying D0 Entry\n");
> +
> + /*
> + * Hv_pci_bus_exit() calls hv_send_resource_released()
> + * to free up resources of its child devices.
> + * In the kdump kernel we need to set the
> + * wslot_res_allocated to 255 so it scans all child
> + * devices to release resources allocated in the
> + * normal kernel before panic happened.
> + */
> + hbus->wslot_res_allocated = 255;
> +
> + ret = hv_pci_bus_exit(hdev, true);
> +
> + if (ret == 0) {
> + kfree(pkt);
> + goto enter_d0_retry;
> + }
> + dev_err(&hdev->device,
> + "Retrying D0 failed with ret %d\n", ret);
> + }
> +
> if (comp_pkt.completion_status < 0) {
> dev_err(&hdev->device,
> "PCI Pass-through VSP failed D0 Entry with status %x\n",
> @@ -3185,7 +3221,7 @@ static int hv_pci_probe(struct hv_device *hdev,
> return ret;
> }
>
> -static int hv_pci_bus_exit(struct hv_device *hdev, bool hibernating)
> +static int hv_pci_bus_exit(struct hv_device *hdev, bool keep_devs)
> {
> struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
> struct {
> @@ -3203,7 +3239,7 @@ static int hv_pci_bus_exit(struct hv_device *hdev, bool hibernating)
> if (hdev->channel->rescind)
> return 0;
>
> - if (!hibernating) {
> + if (!keep_devs) {
> /* Delete any children which might still exist. */
> dr = kzalloc(sizeof(*dr), GFP_KERNEL);
> if (dr && hv_pci_start_relations_work(hbus, dr))
> --
> 2.20.1
>
