Am 26.04.20 um 14:08 schrieb Ard Biesheuvel:
On Sun, 26 Apr 2020 at 13:27, Christian König <christian.koenig@xxxxxxx> wrote:
Am 26.04.20 um 12:59 schrieb Ard Biesheuvel:
On Sun, 26 Apr 2020 at 12:53, Christian König <christian.koenig@xxxxxxx> wrote:
Am 26.04.20 um 12:46 schrieb Ard Biesheuvel:
On Sun, 26 Apr 2020 at 11:58, Ard Biesheuvel <ardb@xxxxxxxxxx> wrote:
On Sun, 26 Apr 2020 at 11:08, Christian König <christian.koenig@xxxxxxx> wrote:
Am 25.04.20 um 19:32 schrieb Ard Biesheuvel:
On Tue, 21 Apr 2020 at 19:07, Ard Biesheuvel <ardb@xxxxxxxxxx> wrote:
On Tue, 21 Apr 2020 at 18:43, Christian König <christian.koenig@xxxxxxx> wrote:
Am 21.04.20 um 18:22 schrieb Ard Biesheuvel:
When resizing a BAR, pci_reassign_bridge_resources() is invoked to
bring the bridge windows of parent bridges in line with the new BAR
assignment.
This assumes that the device whose BAR is being resized lives on a
subordinate bus, but this is not necessarily the case. A device may
live on the root bus, in which case dev->bus->self is NULL, and
passing a NULL pci_dev pointer to pci_reassign_bridge_resources()
will cause it to crash.
So let's make the call to pci_reassign_bridge_resources() conditional
on whether dev->bus->self is non-NULL in the first place.
Fixes: 8bb705e3e79d84e7 ("PCI: Add pci_resize_resource() for resizing BARs")
Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
Sounds like it makes sense, patch is
Reviewed-by: Christian König <christian.koenig@xxxxxxx>.
Thanks Christian.
May I ask where you found that condition?
In this particular case, it was on an ARM board with funky PCIe IP
that does not expose a root port in its bus hierarchy.
But in the general case, PCIe endpoints can be integrated into the
root complex, in which case they appear on the root bus, and there is
no reason such endpoints shouldn't be allowed to have resizable BARs.
Actually, looking at this more carefully, I think
pci_reassign_bridge_resources() needs to do /something/ to ensure that
the resources are reshuffled if needed when the resized BAR overlaps
with another one.
The resized BAR never overlaps with an existing one since to resize a
BAR it needs to be deallocated and disabled. This is done as a
precaution to avoid potential incorrect routing and decode of memory access.
The call to pci_reassign_bridge_resources() is only there to change the
resources of the upstream bridge to the device which is resized and not
to adjust the resources of the device itself.
So does that mean that BAR resizing is only possible if no other BARs,
either on the same device or on other ones, need to be moved?
OK, so obviously, the current code already releases and reassigns
resources on the same device.
What I am not getting is how this works with more complex topologies, e.g.,
RP 1
multi function device (e.g., GPU + HDMI)
GPU BAR 0 256M
GPU BAR 1 16 M
HDMI BAR 0 16 KB
RP 2
some other endpoint using MMIO64 BARs
So in this case, RP1 will get a prefetchable bridge BAR window of 512
M, and RP2 may get one that is directly adjacent to that. When
resizing GPU BAR 0 to 4 GB, the whole hierarchy needs to be
reshuffled, right?
Correct, yes. Because you not only need to configure the BARs of the
device(s), but also the bridges in between to get the routing right.
Right. But my point is really the RP2 is not a bridge in between.
Just wrote another mail with an example how this works on amdgpu. What
aids us in amdgpu is that the devices only has two 64bit BARs, the
FB/VRAM which we want to resize and the doorbell.
I can easily disable access to the doorbell BAR temporary in amdgpu,
otherwise the whole resize wouldn't work at all.
OK, so the example is clear, and I understand how you have to walk the
path up to the root bus to reconfigure the bridge BARs on each
upstream bridge.
But at each level, the BAR space that is being reassigned may be in
use by another device already, no? RP2 in my example is a sibling of
RP1, so the walk up to the root will not traverse it. If RP2's bridge
BARs conflict with the resized BAR below RP1, will the resize simply
fail?
Yes exactly that. When BARs on upstream bridges can't be extended
because some other downstream BAR can't move around we just abort the
resize.
OK.
So how does this work with, e.g., other functions on the same
endpoint, like the audio adapter that is exposed for the audio part of
the HDMI port? Without releasing its BAR resource, it may end up
overlapping, no? And you cannot really release it without
collaboration from the driver, afaict.
Correct yes. The trick we use with AMD GPUs is that the audio endpoint,
GPU MMIO register etc.. are all 32bit resources. The only two 64bit
resources we have are the FB/VRAM and the doorbell BAR.
Since we usually need to resize the FB/VRAM BAR much larger than the
32bit/4GB limit anyway we separate the 32bit resources from the 64bit
resources.
This works since bridges have separate 32bit and 64bit windows for 32bit
and 64bit resources.
But yes if you have a mix of 64bit devices behind a single bridge this
will currently fail rather obviously.
What we could maybe do to improve this is to teach the resources
assignment code in the PCI subsystem to take resize-able BARs into
account. This way we could trigger resource reallocation before drivers
load and start using the BARs in question.
Regards,
Christian.
