On Fri, Apr 24, 2020 at 05:38:54PM +0200, Pali Rohár wrote:
> PCI-E capability macros are already defined in linux/pci_regs.h.
> Remove their reimplementation in pcie-aardvark.
s/PCI-E/PCIe/ but only if you need to repost this for some other reason.
Thanks a lot for doing this! I noticed this while reading through the
driver earlier. Using the normal names definitely makes this a lot
more readable and greppable.
> Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> ---
> drivers/pci/controller/pci-aardvark.c | 41 ++++++++++++---------------
> 1 file changed, 18 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> index 7a4f395c5812..948e61e76053 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -34,17 +34,6 @@
> #define PCIE_CORE_CMD_MEM_IO_REQ_EN BIT(2)
> #define PCIE_CORE_DEV_REV_REG 0x8
> #define PCIE_CORE_PCIEXP_CAP 0xc0
> -#define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8
> -#define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4)
> -#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5
> -#define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11)
> -#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12
> -#define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2
> -#define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
> -#define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
> -#define PCIE_CORE_LINK_TRAINING BIT(5)
> -#define PCIE_CORE_LINK_SPEED_SHIFT 16
> -#define PCIE_CORE_LINK_WIDTH_SHIFT 20
> #define PCIE_CORE_ERR_CAPCTL_REG 0x118
> #define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX BIT(5)
> #define PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN BIT(6)
> @@ -223,6 +212,11 @@ static inline u32 advk_readl(struct advk_pcie *pcie, u64 reg)
> return readl(pcie->base + reg);
> }
>
> +static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg)
> +{
> + return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
> +}
> +
> static int advk_pcie_link_up(struct advk_pcie *pcie)
> {
> u32 val, ltssm_state;
> @@ -286,16 +280,16 @@ static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
> * Start link training immediately after enabling it.
> * This solves problems for some buggy cards.
> */
> - reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
> - reg |= PCIE_CORE_LINK_TRAINING;
> - advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
> + reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
> + reg |= PCI_EXP_LNKCTL_RL;
> + advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
>
> ret = advk_pcie_wait_for_link(pcie);
> if (ret)
> return ret;
>
> - reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
> - neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
> + reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA);
> + neg_gen = reg & PCI_EXP_LNKSTA_CLS;
>
> return neg_gen;
> }
> @@ -385,13 +379,14 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
> PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV;
> advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
>
> - /* Set PCIe Device Control and Status 1 PF0 register */
> - reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
> - (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
> - PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
> - (PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
> - PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
> - advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
> + /* Set PCIe Device Control register */
> + reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
> + reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
> + reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
> + reg &= ~PCI_EXP_DEVCTL_READRQ;
> + reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */
> + reg |= PCI_EXP_DEVCTL_READRQ_512B;
> + advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
>
> /* Program PCIe Control 2 to disable strict ordering */
> reg = PCIE_CORE_CTRL2_RESERVED |
> --
> 2.20.1
>
