The VMD endpoint provides a real PCIe domain to the guest, including
bridges and endpoints. The IOMMU performs Host Physical Address to Guest
Physical Address translation when assigning downstream endpoint BARs and
when translating MMIO addresses.
This translation is not desired when assigning bridge windows. When MMIO
goes to an endpoint after being translated to HPA, the bridge will
reject the HPA transaction because the bridge window has been programmed
with translated GPAs.
VMD device 28C0 natively supports passthrough by providing the Host
Physical Address in shadow registers accessible to the guest for bridge
window assignment. The shadow registers are valid if bit 1 is set in VMD
VMLOCK config register 0x70.
This quirk emulates the VMLOCK and HPA shadow registers for all VMD
device ids which don't natively offer this feature. The Linux VMD driver
is updated to match the QEMU subsystem id to enable this feature.
Signed-off-by: Jon Derrick <jonathan.derrick@xxxxxxxxx>
---
hw/vfio/pci-quirks.c | 119 +++++++++++++++++++++++++++++++++++++++++++
hw/vfio/pci.c | 7 +++
hw/vfio/pci.h | 2 +
hw/vfio/trace-events | 4 ++
4 files changed, 132 insertions(+)
diff --git a/hw/vfio/pci-quirks.c b/hw/vfio/pci-quirks.c
index 2d348f8237..2fd27cc8f6 100644
--- a/hw/vfio/pci-quirks.c
+++ b/hw/vfio/pci-quirks.c
@@ -1709,3 +1709,122 @@ free_exit:
return ret;
}
+
+/*
+ * The VMD endpoint provides a real PCIe domain to the guest. The IOMMU
+ * performs Host Physical Address to Guest Physical Address translation when
+ * assigning downstream endpoint BARs and when translating MMIO addresses.
+ * However this translation is not desired when assigning bridge windows. When
+ * MMIO goes to an endpoint after being translated to HPA, the bridge rejects
+ * the transaction because the window has been programmed with translated GPAs.
+ *
+ * VMD uses the Host Physical Address in order to correctly program the bridge
+ * windows in its PCIe domain. VMD device 28C0 has HPA shadow registers located
+ * at offset 0x2000 in MEMBAR2 (BAR 4). The shadow registers are valid if bit 1
+ * is set in the VMD VMLOCK config register 0x70.
+ *
+ * This quirk emulates the VMLOCK and HPA shadow registers for all VMD device
+ * ids which don't natively offer this feature. The subsystem vendor/device
+ * id is set to the QEMU subsystem vendor/device id, where the driver matches
+ * the id to enable this feature.
+ */
+typedef struct VFIOVMDQuirk {
+ VFIOPCIDevice *vdev;
+ uint64_t membar_phys[2];
+} VFIOVMDQuirk;
+
+static uint64_t vfio_vmd_quirk_read(void *opaque, hwaddr addr, unsigned size)
+{
+ VFIOVMDQuirk *data = opaque;
+ uint64_t val = 0;
+
+ memcpy(&val, (void *)data->membar_phys + addr, size);
+ return val;
+}
+
+static const MemoryRegionOps vfio_vmd_quirk = {
+ .read = vfio_vmd_quirk_read,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+#define VMD_VMLOCK 0x70
+#define VMD_SHADOW 0x2000
+#define VMD_MEMBAR2 4
+
+static int vfio_vmd_emulate_shadow_registers(VFIOPCIDevice *vdev)
+{
+ VFIOQuirk *quirk;
+ VFIOVMDQuirk *data;
+ PCIDevice *pdev = &vdev->pdev;
+ int ret;
+
+ data = g_malloc0(sizeof(*data));
+ ret = pread(vdev->vbasedev.fd, data->membar_phys, 16,
+ vdev->config_offset + PCI_BASE_ADDRESS_2);
+ if (ret != 16) {
+ error_report("VMD %s cannot read MEMBARs (%d)",
+ vdev->vbasedev.name, ret);
+ g_free(data);
+ return -EFAULT;
+ }
+
+ quirk = vfio_quirk_alloc(1);
+ quirk->data = data;
+ data->vdev = vdev;
+
+ /* Emulate Shadow Registers */
+ memory_region_init_io(quirk->mem, OBJECT(vdev), &vfio_vmd_quirk, data,
+ "vfio-vmd-quirk", sizeof(data->membar_phys));
+ memory_region_add_subregion_overlap(vdev->bars[VMD_MEMBAR2].region.mem,
+ VMD_SHADOW, quirk->mem, 1);
+ memory_region_set_readonly(quirk->mem, true);
+ memory_region_set_enabled(quirk->mem, true);
+
+ QLIST_INSERT_HEAD(&vdev->bars[VMD_MEMBAR2].quirks, quirk, next);
+
+ trace_vfio_pci_vmd_quirk_shadow_regs(vdev->vbasedev.name,
+ data->membar_phys[0],
+ data->membar_phys[1]);
+
+ /* Advertise Shadow Register support */
+ pci_byte_test_and_set_mask(pdev->config + VMD_VMLOCK, 0x2);
+ pci_set_byte(pdev->wmask + VMD_VMLOCK, 0);
+ pci_set_byte(vdev->emulated_config_bits + VMD_VMLOCK, 0x2);
+
+ trace_vfio_pci_vmd_quirk_vmlock(vdev->vbasedev.name,
+ pci_get_byte(pdev->config + VMD_VMLOCK));
+
+ /* Drivers can match the subsystem vendor/device id */
+ pci_set_word(pdev->config + PCI_SUBSYSTEM_VENDOR_ID,
+ PCI_SUBVENDOR_ID_REDHAT_QUMRANET);
+ pci_set_word(vdev->emulated_config_bits + PCI_SUBSYSTEM_VENDOR_ID, ~0);
+
+ pci_set_word(pdev->config + PCI_SUBSYSTEM_ID, PCI_SUBDEVICE_ID_QEMU);
+ pci_set_word(vdev->emulated_config_bits + PCI_SUBSYSTEM_ID, ~0);
+
+ trace_vfio_pci_vmd_quirk_subsystem(vdev->vbasedev.name,
+ vdev->sub_vendor_id, vdev->sub_device_id,
+ pci_get_word(pdev->config + PCI_SUBSYSTEM_VENDOR_ID),
+ pci_get_word(pdev->config + PCI_SUBSYSTEM_ID));
+
+ return 0;
+}
+
+int vfio_pci_vmd_init(VFIOPCIDevice *vdev)
+{
+ int ret = 0;
+
+ switch (vdev->device_id) {
+ case 0x28C0: /* Native passthrough support */
+ break;
+ /* Emulates Native passthrough support */
+ case 0x201D:
+ case 0x467F:
+ case 0x4C3D:
+ case 0x9A0B:
+ ret = vfio_vmd_emulate_shadow_registers(vdev);
+ break;
+ }
+
+ return ret;
+}
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index 5e75a95129..85425a1a6f 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -3024,6 +3024,13 @@ static void vfio_realize(PCIDevice *pdev, Error **errp)
}
}
+ if (vdev->vendor_id == PCI_VENDOR_ID_INTEL) {
+ ret = vfio_pci_vmd_init(vdev);
+ if (ret) {
+ error_report("Failed to setup VMD");
+ }
+ }
+
vfio_register_err_notifier(vdev);
vfio_register_req_notifier(vdev);
vfio_setup_resetfn_quirk(vdev);
diff --git a/hw/vfio/pci.h b/hw/vfio/pci.h
index 0da7a20a7e..e8632d806b 100644
--- a/hw/vfio/pci.h
+++ b/hw/vfio/pci.h
@@ -217,6 +217,8 @@ int vfio_pci_igd_opregion_init(VFIOPCIDevice *vdev,
int vfio_pci_nvidia_v100_ram_init(VFIOPCIDevice *vdev, Error **errp);
int vfio_pci_nvlink2_init(VFIOPCIDevice *vdev, Error **errp);
+int vfio_pci_vmd_init(VFIOPCIDevice *vdev);
+
void vfio_display_reset(VFIOPCIDevice *vdev);
int vfio_display_probe(VFIOPCIDevice *vdev, Error **errp);
void vfio_display_finalize(VFIOPCIDevice *vdev);
diff --git a/hw/vfio/trace-events b/hw/vfio/trace-events
index b1ef55a33f..aabbd2693a 100644
--- a/hw/vfio/trace-events
+++ b/hw/vfio/trace-events
@@ -90,6 +90,10 @@ vfio_pci_nvidia_gpu_setup_quirk(const char *name, uint64_t tgt, uint64_t size) "
vfio_pci_nvlink2_setup_quirk_ssatgt(const char *name, uint64_t tgt, uint64_t size) "%s tgt=0x%"PRIx64" size=0x%"PRIx64
vfio_pci_nvlink2_setup_quirk_lnkspd(const char *name, uint32_t link_speed) "%s link_speed=0x%x"
+vfio_pci_vmd_quirk_shadow_regs(const char *name, uint64_t mb1, uint64_t mb2) "%s membar1_phys=0x%"PRIx64" membar2_phys=0x%"PRIx64"
+vfio_pci_vmd_quirk_vmlock(const char *name, uint8_t vmlock) "%s vmlock=0x%x"
+vfio_pci_vmd_quirk_subsystem(const char *name, uint16_t old_svid, uint16_t old_sdid, uint16_t new_svid, uint16_t new_sdid) "%s subsystem id 0x%04x:0x%04x -> 0x%04x:0x%04x"
+
# common.c
vfio_region_write(const char *name, int index, uint64_t addr, uint64_t data, unsigned size) " (%s:region%d+0x%"PRIx64", 0x%"PRIx64 ", %d)"
vfio_region_read(char *name, int index, uint64_t addr, unsigned size, uint64_t data) " (%s:region%d+0x%"PRIx64", %d) = 0x%"PRIx64
--
2.18.1
