RE: [PATCH v8 7/8] PCI: rcar: Add endpoint mode support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar-san,

Thank you for the patch!
I'm sorry I should have mentioned on previous email. But, I have some comments.

> From: Lad Prabhakar, Sent: Sunday, April 19, 2020 10:27 PM
> 
> Add support for R-Car PCIe controller to work in endpoint mode.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
<snip>
> +static int rcar_pcie_ep_set_msi(struct pci_epc *epc, u8 fn, u8 interrupts)
> +{
> +	struct rcar_pcie_endpoint *ep = epc_get_drvdata(epc);
> +	struct rcar_pcie *pcie = &ep->pcie;
> +	u32 flags;
> +
> +	flags = rcar_pci_read_reg(pcie, MSICAP(fn));

The argument of MSICAP() should be 0. Otherwise, if the fn is 1 or more,
the code reads a wrong register.

> +	flags |= interrupts << MSICAP0_MMESCAP_OFFSET;
> +	rcar_pci_write_reg(pcie, flags, MSICAP(fn));

Same here about MSICAP().

> +
> +	return 0;
> +}
> +
> +static int rcar_pcie_ep_get_msi(struct pci_epc *epc, u8 fn)
> +{
> +	struct rcar_pcie_endpoint *ep = epc_get_drvdata(epc);
> +	struct rcar_pcie *pcie = &ep->pcie;
> +	u32 flags;
> +
> +	flags = rcar_pci_read_reg(pcie, MSICAP(fn));

Same here about MSICAP().

> +	if (!(flags & MSICAP0_MSIE))
> +		return -EINVAL;
> +
> +	return ((flags & MSICAP0_MMENUM_MASK) >> MSICAP0_MMENUM_OFFSET);
> +}
> +
> +static int rcar_pcie_ep_map_addr(struct pci_epc *epc, u8 fn,
> +				 phys_addr_t addr, u64 pci_addr, size_t size)
> +{
> +	struct rcar_pcie_endpoint *ep = epc_get_drvdata(epc);
> +	struct rcar_pcie *pcie = &ep->pcie;
> +	struct resource res;
> +	int window;
> +	int err;
> +
> +	/* check if we have a link. */
> +	err = rcar_pcie_wait_for_dl(pcie);
> +	if (err) {
> +		dev_err(pcie->dev, "link not up\n");
> +		return err;
> +	}
> +
> +	window = rcar_pcie_ep_get_window(ep, addr);
> +	if (window < 0) {
> +		dev_err(pcie->dev, "failed to get corresponding window\n");
> +		return -EINVAL;
> +	}
> +
> +	memset(&res, 0x0, sizeof(res));
> +	res.start = pci_addr;
> +	res.end = pci_addr + size - 1;
> +	res.flags = IORESOURCE_MEM;
> +
> +	rcar_pcie_set_outbound(pcie, window, &res);
> +
> +	ep->ob_mapped_addr[window] = addr;
> +
> +	return 0;
> +}
> +
> +static void rcar_pcie_ep_unmap_addr(struct pci_epc *epc, u8 fn,
> +				    phys_addr_t addr)
> +{
> +	struct rcar_pcie_endpoint *ep = epc_get_drvdata(epc);
> +	struct resource res;
> +	int idx;
> +
> +	for (idx = 0; idx < ep->num_ob_windows; idx++)
> +		if (ep->ob_mapped_addr[idx] == addr)
> +			break;
> +
> +	if (idx >= ep->num_ob_windows)
> +		return;
> +
> +	memset(&res, 0x0, sizeof(res));
> +	rcar_pcie_set_outbound(&ep->pcie, idx, &res);
> +
> +	ep->ob_mapped_addr[idx] = 0;
> +}
> +
> +static int rcar_pcie_ep_assert_intx(struct rcar_pcie_endpoint *ep,
> +				    u8 fn, u8 intx)
> +{
> +	struct rcar_pcie *pcie = &ep->pcie;
> +	u32 val;
> +
> +	val = rcar_pci_read_reg(pcie, PCIEMSITXR);
> +	if ((val & PCI_MSI_FLAGS_ENABLE)) {
> +		dev_err(pcie->dev, "MSI is enabled, cannot assert INTx\n");
> +		return -EINVAL;
> +	}
> +
> +	val = rcar_pci_read_reg(pcie, PCICONF(1));
> +	if ((val & INTDIS)) {
> +		dev_err(pcie->dev, "INTx message transmission is disabled\n");
> +		return -EINVAL;
> +	}
> +
> +	val = rcar_pci_read_reg(pcie, PCIEINTXR);
> +	if ((val & ASTINTX)) {
> +		dev_err(pcie->dev, "INTx is already asserted\n");
> +		return -EINVAL;
> +	}
> +
> +	val |= ASTINTX;
> +	rcar_pci_write_reg(pcie, val, PCIEINTXR);
> +	mdelay(1);

Since pci_epc_raise_irq() calls mutex_lock() and then this function,
we can assume this function also can sleep. And, according to
Documentation/timers/timers-howto.rst, we should use
usleep_range(1000, 1000) instead of mdelay(1).

> +	val = rcar_pci_read_reg(pcie, PCIEINTXR);
> +	val &= ~ASTINTX;
> +	rcar_pci_write_reg(pcie, val, PCIEINTXR);
> +
> +	return 0;
> +}
> +
> +static int rcar_pcie_ep_assert_msi(struct rcar_pcie *pcie,
> +				   u8 fn, u8 interrupt_num)
> +{
> +	u16 msi_count;
> +	u32 val;
> +
> +	/* Check MSI enable bit */
> +	val = rcar_pci_read_reg(pcie, MSICAP(fn));

Same here about MSICAP().

> +	if (!(val & MSICAP0_MSIE))
> +		return -EINVAL;
> +
> +	/* Get MSI numbers from MME */
> +	msi_count = ((val & MSICAP0_MMENUM_MASK) >> MSICAP0_MMENUM_OFFSET);
> +	msi_count = 1 << msi_count;
> +
> +	if (!interrupt_num || interrupt_num > msi_count)
> +		return -EINVAL;
> +
> +	val = rcar_pci_read_reg(pcie, PCIEMSITXR);
> +	rcar_pci_write_reg(pcie, val | (interrupt_num - 1), PCIEMSITXR);
> +
> +	return 0;
> +}
<snip>
> diff --git a/drivers/pci/controller/pcie-rcar.h b/drivers/pci/controller/pcie-rcar.h
> index cec7768b4725..0fbeff3d7b78 100644
> --- a/drivers/pci/controller/pcie-rcar.h
> +++ b/drivers/pci/controller/pcie-rcar.h
> @@ -17,6 +17,7 @@
>  #define PCIECDR			0x000020
>  #define PCIEMSR			0x000028
>  #define PCIEINTXR		0x000400
> +#define  ASTINTX		BIT(16)
>  #define PCIEPHYSR		0x0007f0
>  #define  PHYRDY			BIT(0)
>  #define PCIEMSITXR		0x000840
> @@ -55,12 +56,20 @@
> 
>  /* Configuration */
>  #define PCICONF(x)		(0x010000 + ((x) * 0x4))
> +#define  INTDIS			BIT(10)
>  #define PMCAP(x)		(0x010040 + ((x) * 0x4))
> +#define MSICAP(x)		(0x010050 + ((x) * 0x4))
> +#define  MSICAP0_MSIE		BIT(16)
> +#define  MSICAP0_MMESCAP_OFFSET	17
> +#define  MSICAP0_MMENUM_OFFSET	20
> +#define  MSICAP0_MMENUM_MASK	GENMASK(22, 20)

s/MSICAP0_MMENUM/MSICAP0_MMESE/ ?

Best regards,
Yoshihiro Shimoda

>  #define EXPCAP(x)		(0x010070 + ((x) * 0x4))
>  #define VCCAP(x)		(0x010100 + ((x) * 0x4))
> 
>  /* link layer */
> +#define IDSETR0			0x011000
>  #define IDSETR1			0x011004
> +#define SUBIDSETR		0x011024
>  #define TLCTLR			0x011048
>  #define MACSR			0x011054
>  #define  SPCHGFIN		BIT(4)
> --
> 2.17.1





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux