Re: [PATCH] genirq/msi: Check null pointer before copying struct msi_msg

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Apr 20, 2020 at 9:08 AM Alan Mikhak <alan.mikhak@xxxxxxxxxx> wrote:
>
> On Mon, Apr 20, 2020 at 2:14 AM Marc Zyngier <maz@xxxxxxxxxx> wrote:
> >
> > On 2020-04-18 16:19, Gustavo Pimentel wrote:
> > > Hi Marc and Alan,
> > >
> > >> I'm not convinced by this. If you know that, by construction, these
> > >> interrupts are not associated with an underlying MSI, why calling
> > >> get_cached_msi_msg() the first place?
> > >>
> > >> There seem to be some assumptions in the DW EDMA driver that the
> > >> signaling would be MSI based, so maybe someone from Synopsys
> > >> (Gustavo?)
> > >> could clarify that. From my own perspective, running on an endpoint
> > >> device means that it is *generating* interrupts, and I'm not sure what
> > >> the MSIs represent here.
> > >
> > > Giving a little context to this topic.
> > >
> > > The eDMA IP present on the Synopsys DesignWare PCIe Endpoints can be
> > > configured and triggered *remotely* as well *locally*.
> > > For the sake of simplicity let's assume for now the eDMA was
> > > implemented
> > > on the EP and that is the IP that we want to configure and use.
> > >
> > > When I say *remotely* I mean that this IP can be configurable through
> > > the
> > > RC/CPU side, however, for that, it requires the eDMA registers to be
> > > exposed through a PCIe BAR on the EP. This will allow setting the SAR,
> > > DAR and other settings, also need(s) the interrupt(s) address(es) to be
> > > set as well (MSI or MSI-X only) so that it can signal through PCIe (to
> > > the RC and consecutively the associated EP driver) if the data transfer
> > > has been completed, aborted or if the Linked List consumer algorithm
> > > has
> > > passed in some linked element marked with a watermark.
> > >
> > > It was based on this case that the eDMA driver was exclusively
> > > developed.
> > >
> > > However, Alan, wants to expand a little more this, by being able to use
> > > this driver on the EP side (through
> > > pcitest/pci_endpoint_test/pci_epf_test) so that he can configure this
> > > IP
> > > *locally*.
> > > In fact, when doing this, he doesn't need to configure the interrupt
> > > address (MSI or MSI-X), because this IP provides a local interrupt line
> > > so that be connected to other blocks on the EP side.
> >
> > Right, so this confirms my hunch that the driver is being used in
> > a way that doesn't reflect the expected use case. Rather than
> > papering over the problem by hacking the core code, I'd rather see
> > the eDMA driver be updated to support both host and endpoint cases.
> > This probably boils down to a PCI vs non-PCI set of helpers.
> >
> > Alan, could you confirm whether we got it right?
>
> Thanks Marc and Gustavo. I appreciate all your comments and feedback.
>
> You both got it right. As Gustavo mentioned, I am trying to expand dw-edma
> for additional use cases.
>
> First new use case is for integration of dw-edma with pci-epf-test so the latter
> can initiate dma transfers locally from endpoint memory to host memory over the
> PCIe bus in response to a user command issued from the host-side command
> prompt using the pcitest utility. When the locally-initiated dma
> transfer completes
> in this use case on the endpoint side, dw-edma issues an interrupt to the local
> CPU on the endpoint side by way of a legacy interrupt

Although dw-edma enables and handles such interrupts, to be correct, I should
have said that in this use case Synopsys DesignWare PCI eDMA hardware issues
an interrupt to the local CPU on the endpoint side by way of a legacy interrupt.

> and pci-epf-test issues
> an interrupt toward the remote host CPU across the PCIe bus by way of legacy,
> MSI, or possibly MSI-X interrupt.
>
> Second new use case is for integration of dw-edma with pci_endpoint_test
> running on the host CPU so the latter can initiate dma transfers locally from
> host-side in response to a user command issued from the host-side command
> prompt using the pcitest utility. This use case is for host systems that have
> Synopsys DesignWare PCI eDMA hardware on the host side. When the
> locally-initiated dma transfer completes in this use case on the host-side,
> dw-edma issues a legacy interrupt to its local host CPU

Although dw-edma enables and handles such interrupts, to be correct, I should
have said that in this case the Synopsys DesignWare PCI eDMA hardware issues
a legacy interrupt to its local host CPU in this use case.

> and pci-epf-test running
> on the endpoint side issues a legacy, MSI, or possibly MSI-X interrupt
> across the
> PCIe bus toward the host CPU.
>
> When both the host and endpoint sides have the Synopsys DesignWare PCI
> eDMA hardware, more use cases become possible in which eDMA controllers
> from both systems can be engaged to move data. Embedded DMA controllers
> from other PCIe IP vendors may also be supported with additional dmaengine
> drivers under the Linux PCI Endpoint Framework with pci-epf-test, pcitest, and
> pci_endpoint_test suite as well as new PCI endpoint function drivers for such
> applications that require dma, for example nvme or virtio_net endpoint function
> drivers.
>
> I submitted a recent patch [1] and [2] which Gustavo ACk'd to decouple dw-edma
> from struct pci_dev. This enabled me to exercise dw-edma on some riscv host
> and endpoint systems that I work with.
>
> I will submit another patch to decouple dw-edma from struct msi_msg such
> that it would only call get_cached_msi_msg() on the host-side in its original
> use case with remotely initiated dma transfers using the BAR access method.

Marc, I submitted another patch [3] to modify dw-edma to check if a
struct msi_desc
entry exists before copying the contents of its struct msi_msg
pointer. This is not
exactly decoupling dw-edma from struct msi_msg as I suggested earlier but this
set of dw-edma patches should show your concern is being addressed.

>
> The crash that I reported in __get_cached_msi_msg() is probably worth fixing
> too. It seems to be low impact since get_cached_msi_msg() seems to be called
> infrequently by a few callers.
>
> Regards,
> Alan Mikhak
>
> [1] https://patchwork.kernel.org/patch/11489607/
> [2] https://patchwork.kernel.org/patch/11491757/
[3] https://patchwork.kernel.org/patch/11499551/

>
> >
> > Thanks,
> >
> >          M.
> > --
> > Jazz is not dead. It just smells funny...



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux