[PATCH v2 3/4] PCI: cadence: Remove "cdns,max-outbound-regions" DT property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



"cdns,max-outbound-regions" device tree property provides the
maximum number of outbound regions supported by the Host PCIe
controller. However the outbound regions are configured based
on what is populated in the "ranges" DT property.

Avoid using two properties for configuring outbound regions and
use only "ranges" property instead.

Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
 drivers/pci/controller/cadence/pcie-cadence-host.c | 6 ------
 drivers/pci/controller/cadence/pcie-cadence.h      | 2 --
 2 files changed, 8 deletions(-)

diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 60f912a657b9..8f72967f298f 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -140,9 +140,6 @@ static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
 	for_each_of_pci_range(&parser, &range) {
 		bool is_io;
 
-		if (r >= rc->max_regions)
-			break;
-
 		if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
 			is_io = false;
 		else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
@@ -221,9 +218,6 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 	pcie = &rc->pcie;
 	pcie->is_rc = true;
 
-	rc->max_regions = 32;
-	of_property_read_u32(np, "cdns,max-outbound-regions", &rc->max_regions);
-
 	if (!of_pci_dma_range_parser_init(&parser, np))
 		if (of_pci_range_parser_one(&parser, &range))
 			rc->no_bar_nbits = ilog2(range.size);
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index a2b28b912ca4..6bd89a21bb1c 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -251,7 +251,6 @@ struct cdns_pcie {
  * @bus_range: first/last buses behind the PCIe host controller
  * @cfg_base: IO mapped window to access the PCI configuration space of a
  *            single function at a time
- * @max_regions: maximum number of regions supported by the hardware
  * @no_bar_nbits: Number of bits to keep for inbound (PCIe -> CPU) address
  *                translation (nbits sets into the "no BAR match" register)
  * @vendor_id: PCI vendor ID
@@ -262,7 +261,6 @@ struct cdns_pcie_rc {
 	struct resource		*cfg_res;
 	struct resource		*bus_range;
 	void __iomem		*cfg_base;
-	u32			max_regions;
 	u32			no_bar_nbits;
 	u16			vendor_id;
 	u16			device_id;
-- 
2.17.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux