Cadence PCIe core driver (host mode) uses "cdns,no-bar-match-nbits"
property to configure the number of bits passed through from PCIe
address to internal address in Inbound Address Translation register.
However standard PCI dt-binding already defines "dma-ranges" to
describe the address range accessible by PCIe controller. Parse
"dma-ranges" property to configure the number of bits passed
through from PCIe address to internal address in Inbound Address
Translation register.
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
drivers/pci/controller/cadence/pcie-cadence-host.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index 9b1c3966414b..60f912a657b9 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -206,8 +206,10 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
struct device *dev = rc->pcie.dev;
struct platform_device *pdev = to_platform_device(dev);
struct device_node *np = dev->of_node;
+ struct of_pci_range_parser parser;
struct pci_host_bridge *bridge;
struct list_head resources;
+ struct of_pci_range range;
struct cdns_pcie *pcie;
struct resource *res;
int ret;
@@ -222,8 +224,15 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
rc->max_regions = 32;
of_property_read_u32(np, "cdns,max-outbound-regions", &rc->max_regions);
- rc->no_bar_nbits = 32;
- of_property_read_u32(np, "cdns,no-bar-match-nbits", &rc->no_bar_nbits);
+ if (!of_pci_dma_range_parser_init(&parser, np))
+ if (of_pci_range_parser_one(&parser, &range))
+ rc->no_bar_nbits = ilog2(range.size);
+
+ if (!rc->no_bar_nbits) {
+ rc->no_bar_nbits = 32;
+ of_property_read_u32(np, "cdns,no-bar-match-nbits",
+ &rc->no_bar_nbits);
+ }
rc->vendor_id = 0xffff;
of_property_read_u16(np, "vendor-id", &rc->vendor_id);
--
2.17.1
