Re: [PATCH 3/3] PCI: Cadence: Remove using "cdns,max-outbound-regions" DT property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Update subject to match capitalization of others:

  PCI: cadence: Remove "cdns,max-outbound-regions" DT property

On Fri, Mar 27, 2020 at 04:17:27PM +0530, Kishon Vijay Abraham I wrote:
> "cdns,max-outbound-regions" device tree property provides the
> maximum number of outbound regions supported by the Host PCIe
> controller. However the outbound regions are configured based
> on what is populated in the "ranges" DT property.

Looks like this is missing a blank line here?  Or it should be
rewrapped as part of the above paragraph?  I think the below makes
more sense as a separate paragraph, though.

Again, thanks for doing this; this is a great cleanup.

> Avoid using two properties for configuring outbound regions and
> use only "ranges" property instead.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
> ---
>  drivers/pci/controller/cadence/pcie-cadence-host.c | 6 ------
>  drivers/pci/controller/cadence/pcie-cadence.h      | 2 --
>  2 files changed, 8 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
> index 60f912a657b9..8f72967f298f 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence-host.c
> +++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
> @@ -140,9 +140,6 @@ static int cdns_pcie_host_init_address_translation(struct cdns_pcie_rc *rc)
>  	for_each_of_pci_range(&parser, &range) {
>  		bool is_io;
>  
> -		if (r >= rc->max_regions)
> -			break;
> -
>  		if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_MEM)
>  			is_io = false;
>  		else if ((range.flags & IORESOURCE_TYPE_BITS) == IORESOURCE_IO)
> @@ -221,9 +218,6 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
>  	pcie = &rc->pcie;
>  	pcie->is_rc = true;
>  
> -	rc->max_regions = 32;
> -	of_property_read_u32(np, "cdns,max-outbound-regions", &rc->max_regions);
> -
>  	if (!of_pci_dma_range_parser_init(&parser, np))
>  		if (of_pci_range_parser_one(&parser, &range))
>  			rc->no_bar_nbits = ilog2(range.size);
> diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
> index a2b28b912ca4..6bd89a21bb1c 100644
> --- a/drivers/pci/controller/cadence/pcie-cadence.h
> +++ b/drivers/pci/controller/cadence/pcie-cadence.h
> @@ -251,7 +251,6 @@ struct cdns_pcie {
>   * @bus_range: first/last buses behind the PCIe host controller
>   * @cfg_base: IO mapped window to access the PCI configuration space of a
>   *            single function at a time
> - * @max_regions: maximum number of regions supported by the hardware
>   * @no_bar_nbits: Number of bits to keep for inbound (PCIe -> CPU) address
>   *                translation (nbits sets into the "no BAR match" register)
>   * @vendor_id: PCI vendor ID
> @@ -262,7 +261,6 @@ struct cdns_pcie_rc {
>  	struct resource		*cfg_res;
>  	struct resource		*bus_range;
>  	void __iomem		*cfg_base;
> -	u32			max_regions;
>  	u32			no_bar_nbits;
>  	u16			vendor_id;
>  	u16			device_id;
> -- 
> 2.17.1
> 



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux