RE: [PATCH v5 6/7] PCI: rcar: Add support for rcar PCIe controller in endpoint mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar-san,

Thank you for the patch!

> From: Lad Prabhakar, Sent: Saturday, February 29, 2020 12:41 AM
> 
> This patch adds support for rcar PCIe controller to work in endpoint mode.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  drivers/pci/controller/Kconfig        |   8 +
>  drivers/pci/controller/Makefile       |   1 +
>  drivers/pci/controller/pcie-rcar-ep.c | 490 ++++++++++++++++++++++++++++++++++
>  drivers/pci/controller/pcie-rcar.h    |   4 +
>  4 files changed, 503 insertions(+)
>  create mode 100644 drivers/pci/controller/pcie-rcar-ep.c
> 
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index 37e0ea7..9bf4b02 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -62,6 +62,14 @@ config PCIE_RCAR_HOST
>  	  Say Y here if you want PCIe controller support on R-Car SoCs in host
>  	  mode.
> 
> +config PCIE_RCAR_EP
> +	bool "Renesas R-Car PCIe endpoint controller"
> +	depends on ARCH_RENESAS || COMPILE_TEST
> +	depends on PCI_ENDPOINT
> +	help
> +	  Say Y here if you want PCIe controller support on R-Car SoCs in
> +	  endpoint mode.
> +
>  config PCI_HOST_COMMON
>  	bool
>  	select PCI_ECAM
> diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> index b4ada32..067bd33 100644
> --- a/drivers/pci/controller/Makefile
> +++ b/drivers/pci/controller/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_PCI_AARDVARK) += pci-aardvark.o
>  obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
>  obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
>  obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar.o pcie-rcar-host.o
> +obj-$(CONFIG_PCIE_RCAR_EP) += pcie-rcar.o pcie-rcar-ep.o
>  obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
>  obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
>  obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
> diff --git a/drivers/pci/controller/pcie-rcar-ep.c b/drivers/pci/controller/pcie-rcar-ep.c
> new file mode 100644
> index 0000000..db89bbe
> --- /dev/null
> +++ b/drivers/pci/controller/pcie-rcar-ep.c
> @@ -0,0 +1,490 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe endpoint driver for Renesas R-Car SoCs
> + *  Copyright (c) 2020 Renesas Electronics Europe GmbH
> + *
> + * Author: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/pci.h>
> +#include <linux/pci-epc.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +
> +#include "pcie-rcar.h"
> +
> +/* Structure representing the PCIe interface */
> +struct rcar_pcie {
> +	phys_addr_t		*ob_addr;

I think "ob_mapped_addr" is better.

> +	struct pci_epc_mem_window *ob_window;

I think we can get these windows from "array of address space of
the endpoint controller" in struct pci_epc. If so, we can remove
this member.

> +	struct pci_epc		*epc;

This member can be removed like pcie-cadence-ep.c because
this is not used except saving the epc value from devm_pci_epc_create().

<snip>
> +static int rcar_pcie_ep_start(struct pci_epc *epc)
> +{
> +	struct rcar_pcie *ep = epc_get_drvdata(epc);
> +
> +	rcar_pci_write_reg(ep->base, CFINIT, PCIETCTLR);

The following setting is needed before CFINIT like host.

	rcar_pci_write_reg(pcie->base, MACCTLR_INIT_VAL, MACCTLR);

> +
> +	return 0;
> +}
> +
> +static void rcar_pcie_ep_stop(struct pci_epc *epc)
> +{
> +	struct rcar_pcie *ep = epc_get_drvdata(epc);
> +
> +	rcar_pci_write_reg(ep->base, 0, PCIETCTLR);
> +}
> +
> +static const struct pci_epc_features rcar_pcie_epc_features = {
> +	.linkup_notifier = false,
> +	.msi_capable = false,
> +	.msix_capable = false,
> +	/* use 64-bit bars so mark bar1/3/5 as reserved */
> +	.reserved_bar = 1 << BAR_1 | 1 << BAR_3 | 1 << BAR_5,
> +	.bar_fixed_64bit =  (1 << BAR_0) | (1 << BAR_2) | (1 << BAR_4),

These parentheses are not needed like .reserved_bar.

<snip>
> +	err = pci_epc_mem_init(epc, pcie->ob_window, pcie->num_ob_windows);
> +	if (err < 0) {
> +		dev_err(dev, "failed to initialize the epc memory space\n");
> +		goto err_pm_put;
> +	}
> +
> +	rcar_pcie_ep_hw_init(pcie);

I'm not sure, but I wonder if we should call this hw init before pci_epc_mem_init().

<snip>
> +builtin_platform_driver(rcar_pcie_ep_driver);
> diff --git a/drivers/pci/controller/pcie-rcar.h b/drivers/pci/controller/pcie-rcar.h
> index b529d806..5564ca8 100644
> --- a/drivers/pci/controller/pcie-rcar.h
> +++ b/drivers/pci/controller/pcie-rcar.h
> @@ -17,6 +17,7 @@
>  #define PCIECDR			0x000020
>  #define PCIEMSR			0x000028
>  #define PCIEINTXR		0x000400
> +#define  ASTINTX_SHIFT		BIT(16)

Just "ASTINTX" is better.

>  #define PCIEPHYSR		0x0007f0
>  #define  PHYRDY			BIT(0)
>  #define PCIEMSITXR		0x000840
> @@ -55,12 +56,15 @@
> 
>  /* Configuration */
>  #define PCICONF(x)		(0x010000 + ((x) * 0x4))
> +#define  INTDIS_SHIFT		BIT(10)

Same here (we can remove "_SHIFT").

Best regards,
Yoshihiro Shimoda

>  #define PMCAP(x)		(0x010040 + ((x) * 0x4))
>  #define EXPCAP(x)		(0x010070 + ((x) * 0x4))
>  #define VCCAP(x)		(0x010100 + ((x) * 0x4))
> 
>  /* link layer */
> +#define IDSETR0			0x011000
>  #define IDSETR1			0x011004
> +#define SUBIDSETR		0x011024
>  #define TLCTLR			0x011048
>  #define MACSR			0x011054
>  #define  SPCHGFIN		BIT(4)
> --
> 2.7.4





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux