On Mon, 9 Mar 2020 01:33:48 +0000
"Tian, Kevin" <kevin.tian@xxxxxxxxx> wrote:
> > From: Tian, Kevin
> > Sent: Monday, March 9, 2020 9:22 AM
> >
> > > From: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > > Sent: Monday, March 9, 2020 8:46 AM
> > >
> > > On Sat, 7 Mar 2020 01:04:41 +0000
> > > "Tian, Kevin" <kevin.tian@xxxxxxxxx> wrote:
> > >
> > > > > From: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > > > > Sent: Friday, March 6, 2020 11:39 PM
> > > > >
> > > > > On Fri, 6 Mar 2020 08:32:40 +0000
> > > > > "Tian, Kevin" <kevin.tian@xxxxxxxxx> wrote:
> > > > >
> > > > > > > From: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > > > > > > Sent: Friday, March 6, 2020 2:18 AM
> > > > > > >
> > > > > > > On Tue, 25 Feb 2020 02:59:37 +0000
> > > > > > > "Tian, Kevin" <kevin.tian@xxxxxxxxx> wrote:
> > > > > > >
> > > > > > > > > From: Alex Williamson
> > > > > > > > > Sent: Thursday, February 20, 2020 2:54 AM
> > > > > > > > >
> > > > > > > > > If we enable SR-IOV on a vfio-pci owned PF, the resulting VFs are
> > > not
> > > > > > > > > fully isolated from the PF. The PF can always cause a denial of
> > > service
> > > > > > > > > to the VF, even if by simply resetting itself. The degree to which
> > a
> > > PF
> > > > > > > > > can access the data passed through a VF or interfere with its
> > > > > operation
> > > > > > > > > is dependent on a given SR-IOV implementation. Therefore we
> > > want
> > > > > to
> > > > > > > > > avoid a scenario where an existing vfio-pci based userspace
> > driver
> > > > > might
> > > > > > > > > assume the PF driver is trusted, for example assigning a PF to
> > one
> > > VM
> > > > > > > > > and VF to another with some expectation of isolation. IOMMU
> > > > > grouping
> > > > > > > > > could be a solution to this, but imposes an unnecessarily strong
> > > > > > > > > relationship between PF and VF drivers if they need to operate
> > > with
> > > > > the
> > > > > > > > > same IOMMU context. Instead we introduce a "VF token", which
> > > is
> > > > > > > > > essentially just a shared secret between PF and VF drivers,
> > > > > implemented
> > > > > > > > > as a UUID.
> > > > > > > > >
> > > > > > > > > The VF token can be set by a vfio-pci based PF driver and must
> > be
> > > > > known
> > > > > > > > > by the vfio-pci based VF driver in order to gain access to the
> > device.
> > > > > > > > > This allows the degree to which this VF token is considered
> > secret
> > > to
> > > > > be
> > > > > > > > > determined by the applications and environment. For example a
> > > VM
> > > > > > > might
> > > > > > > > > generate a random UUID known only internally to the hypervisor
> > > > > while a
> > > > > > > > > userspace networking appliance might use a shared, or even well
> > > > > know,
> > > > > > > > > UUID among the application drivers.
> > > > > > > > >
> > > > > > > > > To incorporate this VF token, the VFIO_GROUP_GET_DEVICE_FD
> > > > > interface
> > > > > > > is
> > > > > > > > > extended to accept key=value pairs in addition to the device
> > name.
> > > > > This
> > > > > > > > > allows us to most easily deny user access to the device without
> > risk
> > > > > > > > > that existing userspace drivers assume region offsets, IRQs, and
> > > other
> > > > > > > > > device features, leading to more elaborate error paths. The
> > > format of
> > > > > > > > > these options are expected to take the form:
> > > > > > > > >
> > > > > > > > > "$DEVICE_NAME $OPTION1=$VALUE1 $OPTION2=$VALUE2"
> > > > > > > > >
> > > > > > > > > Where the device name is always provided first for compatibility
> > > and
> > > > > > > > > additional options are specified in a space separated list. The
> > > > > > > > > relation between and requirements for the additional options
> > will
> > > be
> > > > > > > > > vfio bus driver dependent, however unknown or unused option
> > > > > within
> > > > > > > this
> > > > > > > > > schema should return error. This allow for future use of
> > unknown
> > > > > > > > > options as well as a positive indication to the user that an option
> > is
> > > > > > > > > used.
> > > > > > > > >
> > > > > > > > > An example VF token option would take this form:
> > > > > > > > >
> > > > > > > > > "0000:03:00.0 vf_token=2ab74924-c335-45f4-9b16-
> > 8569e5b08258"
> > > > > > > > >
> > > > > > > > > When accessing a VF where the PF is making use of vfio-pci, the
> > > user
> > > > > > > > > MUST provide the current vf_token. When accessing a PF, the
> > > user
> > > > > MUST
> > > > > > > > > provide the current vf_token IF there are active VF users or MAY
> > > > > provide
> > > > > > > > > a vf_token in order to set the current VF token when no VF users
> > > are
> > > > > > > > > active. The former requirement assures VF users that an
> > > > > unassociated
> > > > > > > > > driver cannot usurp the PF device. These semantics also imply
> > that
> > > a
> > > > > > > > > VF token MUST be set by a PF driver before VF drivers can access
> > > their
> > > > > > > > > device, the default token is random and mechanisms to read the
> > > > > token
> > > > > > > are
> > > > > > > > > not provided in order to protect the VF token of previous users.
> > > Use
> > > > > of
> > > > > > > > > the vf_token option outside of these cases will return an error,
> > as
> > > > > > > > > discussed above.
> > > > > > > > >
> > > > > > > > > Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > > > > > > > > ---
> > > > > > > > > drivers/vfio/pci/vfio_pci.c | 198
> > > > > > > > > +++++++++++++++++++++++++++++++++++
> > > > > > > > > drivers/vfio/pci/vfio_pci_private.h | 8 +
> > > > > > > > > 2 files changed, 205 insertions(+), 1 deletion(-)
> > > > > > > > >
> > > > > > > > > diff --git a/drivers/vfio/pci/vfio_pci.c
> > b/drivers/vfio/pci/vfio_pci.c
> > > > > > > > > index 2ec6c31d0ab0..8dd6ef9543ca 100644
> > > > > > > > > --- a/drivers/vfio/pci/vfio_pci.c
> > > > > > > > > +++ b/drivers/vfio/pci/vfio_pci.c
> > > > > > > > > @@ -466,6 +466,44 @@ static void vfio_pci_disable(struct
> > > > > > > vfio_pci_device
> > > > > > > > > *vdev)
> > > > > > > > > vfio_pci_set_power_state(vdev, PCI_D3hot);
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > +static struct pci_driver vfio_pci_driver;
> > > > > > > > > +
> > > > > > > > > +static struct vfio_pci_device *get_pf_vdev(struct vfio_pci_device
> > > > > *vdev,
> > > > > > > > > + struct vfio_device **pf_dev)
> > > > > > > > > +{
> > > > > > > > > + struct pci_dev *physfn = pci_physfn(vdev->pdev);
> > > > > > > > > +
> > > > > > > > > + if (!vdev->pdev->is_virtfn)
> > > > > > > > > + return NULL;
> > > > > > > > > +
> > > > > > > > > + *pf_dev = vfio_device_get_from_dev(&physfn->dev);
> > > > > > > > > + if (!*pf_dev)
> > > > > > > > > + return NULL;
> > > > > > > > > +
> > > > > > > > > + if (pci_dev_driver(physfn) != &vfio_pci_driver) {
> > > > > > > > > + vfio_device_put(*pf_dev);
> > > > > > > > > + return NULL;
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + return vfio_device_data(*pf_dev);
> > > > > > > > > +}
> > > > > > > > > +
> > > > > > > > > +static void vfio_pci_vf_token_user_add(struct vfio_pci_device
> > > *vdev,
> > > > > int
> > > > > > > val)
> > > > > > > > > +{
> > > > > > > > > + struct vfio_device *pf_dev;
> > > > > > > > > + struct vfio_pci_device *pf_vdev = get_pf_vdev(vdev,
> > > > > &pf_dev);
> > > > > > > > > +
> > > > > > > > > + if (!pf_vdev)
> > > > > > > > > + return;
> > > > > > > > > +
> > > > > > > > > + mutex_lock(&pf_vdev->vf_token->lock);
> > > > > > > > > + pf_vdev->vf_token->users += val;
> > > > > > > > > + WARN_ON(pf_vdev->vf_token->users < 0);
> > > > > > > > > + mutex_unlock(&pf_vdev->vf_token->lock);
> > > > > > > > > +
> > > > > > > > > + vfio_device_put(pf_dev);
> > > > > > > > > +}
> > > > > > > > > +
> > > > > > > > > static void vfio_pci_release(void *device_data)
> > > > > > > > > {
> > > > > > > > > struct vfio_pci_device *vdev = device_data;
> > > > > > > > > @@ -473,6 +511,7 @@ static void vfio_pci_release(void
> > > *device_data)
> > > > > > > > > mutex_lock(&vdev->reflck->lock);
> > > > > > > > >
> > > > > > > > > if (!(--vdev->refcnt)) {
> > > > > > > > > + vfio_pci_vf_token_user_add(vdev, -1);
> > > > > > > > > vfio_spapr_pci_eeh_release(vdev->pdev);
> > > > > > > > > vfio_pci_disable(vdev);
> > > > > > > > > }
> > > > > > > > > @@ -498,6 +537,7 @@ static int vfio_pci_open(void
> > *device_data)
> > > > > > > > > goto error;
> > > > > > > > >
> > > > > > > > > vfio_spapr_pci_eeh_open(vdev->pdev);
> > > > > > > > > + vfio_pci_vf_token_user_add(vdev, 1);
> > > > > > > > > }
> > > > > > > > > vdev->refcnt++;
> > > > > > > > > error:
> > > > > > > > > @@ -1278,11 +1318,148 @@ static void vfio_pci_request(void
> > > > > > > *device_data,
> > > > > > > > > unsigned int count)
> > > > > > > > > mutex_unlock(&vdev->igate);
> > > > > > > > > }
> > > > > > > > >
> > > > > > > > > +static int vfio_pci_validate_vf_token(struct vfio_pci_device
> > *vdev,
> > > > > > > > > + bool vf_token, uuid_t *uuid)
> > > > > > > > > +{
> > > > > > > > > + /*
> > > > > > > > > + * There's always some degree of trust or collaboration
> > > > > between SR-
> > > > > > > > > IOV
> > > > > > > > > + * PF and VFs, even if just that the PF hosts the SR-IOV
> > > > > capability and
> > > > > > > > > + * can disrupt VFs with a reset, but often the PF has more
> > > > > explicit
> > > > > > > > > + * access to deny service to the VF or access data passed
> > > > > through the
> > > > > > > > > + * VF. We therefore require an opt-in via a shared VF token
> > > > > (UUID)
> > > > > > > > > to
> > > > > > > > > + * represent this trust. This both prevents that a VF driver
> > > > > might
> > > > > > > > > + * assume the PF driver is a trusted, in-kernel driver, and also
> > > > > that
> > > > > > > > > + * a PF driver might be replaced with a rogue driver, unknown
> > > > > to in-
> > > > > > > > > use
> > > > > > > > > + * VF drivers.
> > > > > > > > > + *
> > > > > > > > > + * Therefore when presented with a VF, if the PF is a vfio
> > > > > device and
> > > > > > > > > + * it is bound to the vfio-pci driver, the user needs to provide
> > > > > a VF
> > > > > > > > > + * token to access the device, in the form of appending a
> > > > > vf_token to
> > > > > > > > > + * the device name, for example:
> > > > > > > > > + *
> > > > > > > > > + * "0000:04:10.0 vf_token=bd8d9d2b-5a5f-4f5a-a211-
> > > > > f591514ba1f3"
> > > > > > > > > + *
> > > > > > > > > + * When presented with a PF which has VFs in use, the user
> > > > > must also
> > > > > > > > > + * provide the current VF token to prove collaboration with
> > > > > existing
> > > > > > > > > + * VF users. If VFs are not in use, the VF token provided for
> > > > > the PF
> > > > > > > > > + * device will act to set the VF token.
> > > > > > > > > + *
> > > > > > > > > + * If the VF token is provided but unused, a fault is generated.
> > > > > > > >
> > > > > > > > fault->error, otherwise it is easy to consider a CPU fault. 😊
> > > > > > >
> > > > > > > Ok, I can make that change, but I think you might have a unique
> > > > > > > background to make a leap that a userspace ioctl can trigger a CPU
> > > > > > > fault ;)
> > > > > > >
> > > > > > > > > + */
> > > > > > > > > + if (!vdev->pdev->is_virtfn && !vdev->vf_token && !vf_token)
> > > > > > > > > + return 0; /* No VF token provided or required */
> > > > > > > > > +
> > > > > > > > > + if (vdev->pdev->is_virtfn) {
> > > > > > > > > + struct vfio_device *pf_dev;
> > > > > > > > > + struct vfio_pci_device *pf_vdev = get_pf_vdev(vdev,
> > > > > > > > > &pf_dev);
> > > > > > > > > + bool match;
> > > > > > > > > +
> > > > > > > > > + if (!pf_vdev) {
> > > > > > > > > + if (!vf_token)
> > > > > > > > > + return 0; /* PF is not vfio-pci, no VF
> > > > > token */
> > > > > > > > > +
> > > > > > > > > + pci_info_ratelimited(vdev->pdev,
> > > > > > > > > + "VF token incorrectly provided, PF not
> > > > > bound
> > > > > > > > > to vfio-pci\n");
> > > > > > > > > + return -EINVAL;
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + if (!vf_token) {
> > > > > > > > > + vfio_device_put(pf_dev);
> > > > > > > > > + pci_info_ratelimited(vdev->pdev,
> > > > > > > > > + "VF token required to access
> > > > > device\n");
> > > > > > > > > + return -EACCES;
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + mutex_lock(&pf_vdev->vf_token->lock);
> > > > > > > > > + match = uuid_equal(uuid, &pf_vdev->vf_token-
> > > > > >uuid);
> > > > > > > > > + mutex_unlock(&pf_vdev->vf_token->lock);
> > > > > > > > > +
> > > > > > > > > + vfio_device_put(pf_dev);
> > > > > > > > > +
> > > > > > > > > + if (!match) {
> > > > > > > > > + pci_info_ratelimited(vdev->pdev,
> > > > > > > > > + "Incorrect VF token provided for
> > > > > device\n");
> > > > > > > > > + return -EACCES;
> > > > > > > > > + }
> > > > > > > > > + } else if (vdev->vf_token) {
> > > > > > > > > + mutex_lock(&vdev->vf_token->lock);
> > > > > > > > > + if (vdev->vf_token->users) {
> > > > > > > > > + if (!vf_token) {
> > > > > > > > > + mutex_unlock(&vdev->vf_token-
> > > > > >lock);
> > > > > > > > > + pci_info_ratelimited(vdev->pdev,
> > > > > > > > > + "VF token required to access
> > > > > > > > > device\n");
> > > > > > > > > + return -EACCES;
> > > > > > > > > + }
> > > > > > > > > +
> > > > > > > > > + if (!uuid_equal(uuid, &vdev->vf_token->uuid))
> > > > > {
> > > > > > > > > + mutex_unlock(&vdev->vf_token-
> > > > > >lock);
> > > > > > > > > + pci_info_ratelimited(vdev->pdev,
> > > > > > > > > + "Incorrect VF token provided
> > > > > for
> > > > > > > > > device\n");
> > > > > > > > > + return -EACCES;
> > > > > > > > > + }
> > > > > > > > > + } else if (vf_token) {
> > > > > > > > > + uuid_copy(&vdev->vf_token->uuid, uuid);
> > > > > > > > > + }
> > > > > > > >
> > > > > > > > It implies that we allow PF to be accessed w/o providing a VF token,
> > > > > > > > as long as no VF is currently in-use, which further means no VF can
> > > > > > > > be further assigned since no one knows the random uuid allocated
> > > > > > > > by vfio. Just want to confirm whether it is the desired flavor. If an
> > > > > > > > user really wants to use PF-only, possibly he should disable SR-IOV
> > > > > > > > instead...
> > > > > > >
> > > > > > > Yes, this is the behavior I'm intending. Are you suggesting that we
> > > > > > > should require a VF token in order to access a PF that has SR-IOV
> > > > > > > already enabled? This introduces an inconsistency that SR-IOV can
> > be
> > > > > >
> > > > > > yes. I felt that it's meaningless otherwise if an user has no attempt to
> > > > > > manage SR-IOV but still leaving it enabled. In many cases, enabling of
> > > > > > SR-IOV may reserve some resource in the hardware, thus simply
> > hurting
> > > > > > PF performance.
> > > > >
> > > > > But a user needs to be granted access to a device by a privileged
> > > > > entity and the privileged entity may also enable SR-IOV, so it seems
> > > > > you're assuming the privileged entity is operating independently and
> > > > > not in the best interest of enabling the specific user case.
> > > >
> > > > what about throwing out a warning for such situation? so the userspace
> > > > knows some collaboration is missing before its access to the device.
> > >
> > > This seems arbitrary. pci-pf-stub proves to us that there are devices
> > > that need no special setup for SR-IOV, we don't know that we don't have
> > > such a device. Enabling SR-IOV after the user opens the device also
>
> btw no special setup doesn't mean that a PF driver cannot do bad thing to
> VFs. In such case, I think the whole token idea should be still applied.
pci-pf-stub is a native host driver that does not provide access to the
device to userspace. We trust native host drivers, whether they be
pci-pf-stub, igb, ixgbe, i40e, etc. We don't require a token to attach
a userspace driver to a VF of one of these PF drivers because we trust
them. The VF token idea is exclusively for cases where the PF driver
is an untrusted userspace driver.
> > > doesn't indicate there's necessarily collaboration between the two, so
> > > if we generate a warning on one, how do we assume the other is ok? I
> > > don't really understand why this is generating such concern. Thanks,
>
> specifically I feel we should warn both:
>
> 1) userspace driver GET_DEVICE_FD w/o providing a token on a PF
> which has SR-IOV already enabled
> 2) admin writes non-zero numvfs to a PF which has already bound to
> userspace driver which doesn't provide a token
>
> in both cases VFs are enabled but cannot be used (if you agree that
> the token idea should be also applied to 'no special setup' case)
Both of these seem to be imposing an ordering requirement simply for the
sake of generating a warning. Nothing else requires that ordering. In
case 1), it's just as legitimate for the user to call
VFIO_DEVICE_FEATURE to set the token after they've opened the device.
Perhaps the user would even look at config space via the vfio-pci API
in order to determine that SR-IOV is enabled and set a token. In case
2), the user driver may choose not to set a token until VFs have been
successfully created.
> > I meant to warn the suboptimal case where the userspace driver doesn't
> > provide a token when accessing a PF which has SR-IOV already enabled.
> > I don't think a sane configuration/coordination should do this since all
> > VFs are simply wasted and instead may hurt the PF performance...
*May* hurt performance, but we don't know. Some designs might have
resources dedicated to VFs that aren't used by the PF at all. As I've
experimented with this patch series, I find that an igb PF with SR-IOV
enabled assigned to a VM doesn't work at all, it's not simply a
performance issue. I suspect that's going to be a clue to the user
that their configuration is invalid. I'm sure we'll take some support
overhead as a result of that, but I don't see that we can generate an
arbitrary advisement warning when it very well might be supported on
other devices. This is the nature of a meta driver that supports any
device bound to it. Thanks,
Alex
