---
include/linux/interrupt.h | 2 +
kernel/irq/Kconfig | 5 ++++
kernel/irq/chip.c | 2 -
kernel/irq/debugfs.c | 34 -----------------------------
kernel/irq/internals.h | 2 -
kernel/irq/resend.c | 53 ++++++++++++++++++++++++++++++++++++++++++++--
6 files changed, 61 insertions(+), 37 deletions(-)
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -248,6 +248,8 @@ extern void enable_percpu_nmi(unsigned i
extern int prepare_percpu_nmi(unsigned int irq);
extern void teardown_percpu_nmi(unsigned int irq);
+extern int irq_inject_interrupt(unsigned int irq);
+
/* The following three functions are for the core kernel use only. */
extern void suspend_device_irqs(void);
extern void resume_device_irqs(void);
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -43,6 +43,10 @@ config GENERIC_IRQ_MIGRATION
config AUTO_IRQ_AFFINITY
bool
+# Interrupt injection mechanism
+config GENERIC_IRQ_INJECTION
+ bool
+
# Tasklet based software resend for pending interrupts on enable_irq()
config HARDIRQS_SW_RESEND
bool
@@ -127,6 +131,7 @@ config SPARSE_IRQ
config GENERIC_IRQ_DEBUGFS
bool "Expose irq internals in debugfs"
depends on DEBUG_FS
+ select GENERIC_IRQ_INJECTION
default n
---help---
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -278,7 +278,7 @@ int irq_startup(struct irq_desc *desc, b
}
}
if (resend)
- check_irq_resend(desc);
+ check_irq_resend(desc, false);
return ret;
}
--- a/kernel/irq/debugfs.c
+++ b/kernel/irq/debugfs.c
@@ -190,39 +190,7 @@ static ssize_t irq_debug_write(struct fi
return -EFAULT;
if (!strncmp(buf, "trigger", size)) {
- unsigned long flags;
- int err;
-
- /* Try the HW interface first */
- err = irq_set_irqchip_state(irq_desc_get_irq(desc),
- IRQCHIP_STATE_PENDING, true);
- if (!err)
- return count;
-
- /*
- * Otherwise, try to inject via the resend interface,
- * which may or may not succeed.
- */
- chip_bus_lock(desc);
- raw_spin_lock_irqsave(&desc->lock, flags);
-
- /*
- * Don't allow injection when the interrupt is:
- * - Level or NMI type
- * - not activated
- * - replaying already
- */
- if (irq_settings_is_level(desc) ||
- !irqd_is_activated(&desc->irq_data) ||
- (desc->istate & (IRQS_NMI | IRQS_REPLAY)) {
- err = -EINVAL;
- } else {
- desc->istate |= IRQS_PENDING;
- err = check_irq_resend(desc);
- }
-
- raw_spin_unlock_irqrestore(&desc->lock, flags);
- chip_bus_sync_unlock(desc);
+ int err = irq_inject_interrupt(irq_desc_get_irq(desc));
return err ? err : count;
}
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -108,7 +108,7 @@ irqreturn_t handle_irq_event_percpu(stru
irqreturn_t handle_irq_event(struct irq_desc *desc);
/* Resending of interrupts :*/
-int check_irq_resend(struct irq_desc *desc);
+int check_irq_resend(struct irq_desc *desc, bool inject);
bool irq_wait_for_poll(struct irq_desc *desc);
void __irq_wake_thread(struct irq_desc *desc, struct irqaction *action);
--- a/kernel/irq/resend.c
+++ b/kernel/irq/resend.c
@@ -91,7 +91,7 @@ static int irq_sw_resend(struct irq_desc
*
* Is called with interrupts disabled and desc->lock held.
*/
-int check_irq_resend(struct irq_desc *desc)
+int check_irq_resend(struct irq_desc *desc, bool inject)
{
int err = 0;
@@ -108,7 +108,7 @@ int check_irq_resend(struct irq_desc *de
if (desc->istate & IRQS_REPLAY)
return -EBUSY;
- if (!(desc->istate & IRQS_PENDING))
+ if (!(desc->istate & IRQS_PENDING) && !inject)
return 0;
desc->istate &= ~IRQS_PENDING;
@@ -122,3 +122,52 @@ int check_irq_resend(struct irq_desc *de
desc->istate |= IRQS_REPLAY;
return err;
}
+
+#ifdef CONFIG_GENERIC_IRQ_INJECTION
+/**
+ * irq_inject_interrupt - Inject an interrupt for testing/error injection
+ * @irq: The interrupt number
+ *
+ * This function must only be used for debug and testing purposes!
+ *
+ * Especially on x86 this can cause a premature completion of an interrupt
+ * affinity change causing the interrupt line to become stale. Very
+ * unlikely, but possible.
+ *
+ * The injection can fail for various reasons:
+ * - Interrupt is not activated
+ * - Interrupt is NMI type or currently replaying
+ * - Interrupt is level type
+ * - Interrupt does not support hardware retrigger and software resend is
+ * either not enabled or not possible for the interrupt.
+ */
+int irq_inject_interrupt(unsigned int irq)
+{
+ struct irq_desc *desc;
+ unsigned long flags;
+ int err;
+
+ /* Try the state injection hardware interface first */
+ if (!irq_set_irqchip_state(irq, IRQCHIP_STATE_PENDING, true))
+ return 0;
+
+ /* That failed, try via the resend mechanism */
+ desc = irq_get_desc_buslock(irq, &flags, 0);
+ if (!desc)
+ return -EINVAL;
+
+ /*
+ * Only try to inject when the interrupt is:
+ * - not NMI type
+ * - activated
+ */
+ if ((desc->istate & IRQS_NMI) || !irqd_is_activated(&desc->irq_data))
+ err = -EINVAL;
+ else
+ err = check_irq_resend(desc, true);
+
+ irq_put_desc_busunlock(desc, flags);
+ return err;
+}
+EXPORT_SYMBOL_GPL(irq_inject_interrupt);
+#endif
