[PATCH v3 6/8] net: skfp: use PCI_STATUS_ERROR_BITS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use new constant PCI_STATUS_ERROR_BITS to simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
---
 drivers/net/fddi/skfp/drvfbi.c  | 2 +-
 drivers/net/fddi/skfp/h/skfbi.h | 5 -----
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/net/fddi/skfp/drvfbi.c b/drivers/net/fddi/skfp/drvfbi.c
index 9c8aa3a95..d5937aff5 100644
--- a/drivers/net/fddi/skfp/drvfbi.c
+++ b/drivers/net/fddi/skfp/drvfbi.c
@@ -112,7 +112,7 @@ static void card_start(struct s_smc *smc)
 	 */
 	outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_ON) ;	/* enable for writes */
 	word = inpw(PCI_C(PCI_STATUS)) ;
-	outpw(PCI_C(PCI_STATUS), word | PCI_ERRBITS) ;
+	outpw(PCI_C(PCI_STATUS), word | PCI_STATUS_ERROR_BITS) ;
 	outp(ADDR(B0_TST_CTRL), TST_CFG_WRITE_OFF) ;	/* disable writes */
 
 	/*
diff --git a/drivers/net/fddi/skfp/h/skfbi.h b/drivers/net/fddi/skfp/h/skfbi.h
index 480795681..ccee00b71 100644
--- a/drivers/net/fddi/skfp/h/skfbi.h
+++ b/drivers/net/fddi/skfp/h/skfbi.h
@@ -33,11 +33,6 @@
  */
 #define I2C_ADDR_VPD	0xA0	/* I2C address for the VPD EEPROM */ 
 
-
-#define PCI_ERRBITS	(PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_PARITY)
-
-
-
 /*
  *	Control Register File:
  *	Bank 0
-- 
2.25.1







[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux