Re: [PATCH 02/11] PCI: Add ats_supported host bridge flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Feb 15, 2020 at 03:10:47PM -0600, Bjorn Helgaas wrote:
> On Thu, Feb 13, 2020 at 05:50:40PM +0100, Jean-Philippe Brucker wrote:
> > Each vendor has their own way of describing whether a host bridge
> > supports ATS.  The Intel and AMD ACPI tables selectively enable or
> > disable ATS per device or sub-tree, while Arm has a single bit for each
> > host bridge.  For those that need it, add an ats_supported bit to the
> > host bridge structure.
> > 
> > Signed-off-by: Jean-Philippe Brucker <jean-philippe@xxxxxxxxxx>
> > ---
> >  drivers/pci/probe.c | 7 +++++++
> >  include/linux/pci.h | 1 +
> >  2 files changed, 8 insertions(+)
> > 
> > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> > index 512cb4312ddd..75c0a25af44e 100644
> > --- a/drivers/pci/probe.c
> > +++ b/drivers/pci/probe.c
> > @@ -598,6 +598,13 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
> >  	bridge->native_shpc_hotplug = 1;
> >  	bridge->native_pme = 1;
> >  	bridge->native_ltr = 1;
> > +
> > +	/*
> > +	 * Some systems may disable ATS at the host bridge (ACPI IORT,
> > +	 * device-tree), other filter it with a smaller granularity (ACPI DMAR
> > +	 * and IVRS).
> > +	 */
> > +	bridge->ats_supported = 1;
> 
> The cover letter says it's important to enable ATS only if the host
> bridge supports it.  From the other patches, it looks like we learn if
> the host bridge supports ATS from either a DT "ats-supported" property
> or an ACPI IORT table.  If that's the case, shouldn't the default here
> be "ATS is *not* supported"?

The ACPI IVRS table (AMD) doesn't have a property for the host bridge, it
can only deselect ATS for a sub-range of devices. Similarly the DMAR table
(Intel) declares that ATS is supported either by the whole PCIe domain or
for sub-ranges of devices. I selected ats_supported at the bridge by
default since IVRS needs it and DMAR has its own fine-grained ATS support
configuration.

I'm still not sure this is the right approach, given that the
ats_supported bridge property doesn't exactly correspond to a firmware
property on all platforms. Maybe the device-tree implementation should
follow the IORT one where each device carries a fwspec property stating
"root-complex supports ATS". But it isn't nice either so I tried a cleaner
implementation (as discussed with Robin back on the ATS-with-SMMUv3 series
[1]).

Thanks,
Jean

[1] https://lore.kernel.org/linux-iommu/c10c7adb-c7f6-f8c6-05cc-f4f143427a2d@xxxxxxx/



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux