Re: [PATCH 3/7] vfio/pci: Introduce VF token

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 13 Feb 2020 19:35:16 +0100
Cornelia Huck <cohuck@xxxxxxxxxx> wrote:

> On Thu, 13 Feb 2020 10:23:21 -0700
> Alex Williamson <alex.williamson@xxxxxxxxxx> wrote:
> 
> > On Thu, 13 Feb 2020 12:46:54 +0100
> > Cornelia Huck <cohuck@xxxxxxxxxx> wrote:
> >   
> > > On Tue, 11 Feb 2020 16:05:42 -0700
> > > Alex Williamson <alex.williamson@xxxxxxxxxx> wrote:
> > >     
> > > > If we enable SR-IOV on a vfio-pci owned PF, the resulting VFs are not
> > > > fully isolated from the PF.  The PF can always cause a denial of
> > > > service to the VF, if not access data passed through the VF directly.
> > > > This is why vfio-pci currently does not bind to PFs with SR-IOV enabled
> > > > and does not provide access itself to enabling SR-IOV on a PF.  The
> > > > IOMMU grouping mechanism might allow us a solution to this lack of
> > > > isolation, however the deficiency isn't actually in the DMA path, so
> > > > much as the potential cooperation between PF and VF devices.  Also,
> > > > if we were to force VFs into the same IOMMU group as the PF, we severely
> > > > limit the utility of having independent drivers managing PFs and VFs
> > > > with vfio.
> > > > 
> > > > Therefore we introduce the concept of a VF token.  The token is
> > > > implemented as a UUID and represents a shared secret which must be set
> > > > by the PF driver and used by the VF drivers in order to access a vfio
> > > > device file descriptor for the VF.  The ioctl to set the VF token will
> > > > be provided in a later commit, this commit implements the underlying
> > > > infrastructure.  The concept here is to augment the string the user
> > > > passes to match a device within a group in order to retrieve access to
> > > > the device descriptor.  For example, rather than passing only the PCI
> > > > device name (ex. "0000:03:00.0") the user would also pass a vf_token
> > > > UUID (ex. "2ab74924-c335-45f4-9b16-8569e5b08258").  The device match
> > > > string therefore becomes:
> > > > 
> > > > "0000:03:00.0 vf_token=2ab74924-c335-45f4-9b16-8569e5b08258"
> > > > 
> > > > This syntax is expected to be extensible to future options as well, with
> > > > the standard being:
> > > > 
> > > > "$DEVICE_NAME $OPTION1=$VALUE1 $OPTION2=$VALUE2"      
> > > 
> > > Is this designed to be an AND condition? (I read it as such.)    
> > 
> > Not sure I understand, the device name is always required for
> > compatibility, then zero or more key/value pairs may be needed
> > depending on the vfio bus driver and device requirements.  I'm not
> > suggesting that the user would pass multiple vf_token= options and the
> > implementation here would only parse the first.  I'm really only
> > suggesting the parsing format we'd use for multiple options, I'm not
> > trying to dictate how a bus driver might make use of them.  Does that
> > make sense, should I change some wording?  
> 
> Not multiple vf_token= options, but multiple, different options.
> 
> E.g. we have something like "$NAME foo=xyz bar=zyx". What is supposed
> to happen?
> 
> - both the foo= and bar= values have to give a match
> - either foo= or bar= have to match
> - if foo= doesn't match, try bar=
> - foo= and bar= are ignored, if not applicable

I'm not sure how we can make generic predictions like that, as soon as
we start adding options we risk having two options that are
incompatible, or one deprecates another.

> (My understanding is that $NAME matching continues to be mandatory?)

Yes, there can still be multiple devices per group, so the user needs
to ask for a device by name.

> What should happen for vf_token= is reasonably clear, but I'm wondering
> about further extensions, as you already talk about it.

It's gotten a bit more fuzzy for me as I've been working on the next
iteration.  For instance, if we reject rather than ignore unknown
options, should we also reject a vf_token= option when it isn't needed?
For example, if a user provides a vf_token= option because they think
they know the PF driver, but the PF is actually managed by an in-kernel
host driver, it seems like that should fail.

So it seems that sets a user mindset that if the vf_token= isn't
rejected that it's used, so rather than ignoring a vf_token= option
when opening a PF with no VF users, should providing that value
actually be a mechanism for setting the VF token?  If it is, do we need
VFIO_DEVICE_FEATURE?  I still like VFIO_DEVICE_FEATURE from the aspect
that the user doesn't commit to using a VF token when they open a
device, they can set or change it later, but clearly the functionality
has an overlap.

I'm also tempted to look whether there's something we could do with
cgroups to imply this relationship, but I know very little there and
we'd want to be careful not to impose a namespace beyond this PF/VF
collaboration idea.

> > > > The device name must be first and option=value pairs are separated by
> > > > spaces.
> > > > 
> > > > The vf_token option is only required for VFs where the PF device is
> > > > bound to vfio-pci.  There is no change for PFs using existing host
> > > > drivers.
> > > > 
> > > > Note that in order to protect existing VF users, not only is it required
> > > > to set a vf_token on the PF before VFs devices can be accessed, but also
> > > > if there are existing VF users, (re)opening the PF device must also
> > > > provide the current vf_token as authentication.  This is intended to
> > > > prevent a VF driver starting with a trusted PF driver and later being
> > > > replaced by an unknown driver.  A vf_token is not required to open the
> > > > PF device when none of the VF devices are in use by vfio-pci drivers.
> > > > 
> > > > Signed-off-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > > > ---
> > > >  drivers/vfio/pci/vfio_pci.c         |  127 +++++++++++++++++++++++++++++++++++
> > > >  drivers/vfio/pci/vfio_pci_private.h |    8 ++
> > > >  2 files changed, 134 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
> > > > index 2ec6c31d0ab0..26aea9ac4863 100644
> > > > --- a/drivers/vfio/pci/vfio_pci.c
> > > > +++ b/drivers/vfio/pci/vfio_pci.c
> > > > @@ -466,6 +466,35 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
> > > >  		vfio_pci_set_power_state(vdev, PCI_D3hot);
> > > >  }
> > > >  
> > > > +static struct pci_driver vfio_pci_driver;
> > > > +
> > > > +static void vfio_pci_vf_token_user_add(struct vfio_pci_device *vdev, int val)      
> > > 
> > > Suggestion: call this _user_modify(), and have _user_add() and
> > > _user_remove() as wrappers. That said, ...    
> > 
> > I did consider something along these lines, but it seems overly
> > explicit for a helper that's used in two places with only two obvious
> > and discrete values.  If this were an exposed API, absolutely I'd agree.
> >   
> > > > +{
> > > > +	struct pci_dev *physfn = pci_physfn(vdev->pdev);
> > > > +	struct vfio_device *pf_dev;
> > > > +	struct vfio_pci_device *pf_vdev;
> > > > +
> > > > +	if (!vdev->pdev->is_virtfn)
> > > > +		return;
> > > > +
> > > > +	pf_dev = vfio_device_get_from_dev(&physfn->dev);
> > > > +	if (!pf_dev)
> > > > +		return;
> > > > +
> > > > +	if (pci_dev_driver(physfn) != &vfio_pci_driver) {
> > > > +		vfio_device_put(pf_dev);
> > > > +		return;
> > > > +	}
> > > > +
> > > > +	pf_vdev = vfio_device_data(pf_dev);
> > > > +
> > > > +	mutex_lock(&pf_vdev->vf_token->lock);
> > > > +	pf_vdev->vf_token->users += val;      
> > > 
> > > ...is this expected to always be >= 0? If yes, it looks like a bug if
> > > this is called with val==-n for n > users.    
> > 
> > I'm not sure if you're inadvertently pointing out the bug in the
> > vfio_pci_open() path below where we increment token users before
> > vfio_pci_enable() which can fail, or your suggesting a WARN_ON here
> > should this go negative.  This is a static helper function, so I
> > generally don't try to sanitize the inputs like I would for an exposed
> > API.  
> 
> Yes, if you let users drop below 0, it's an internal error. Still, I
> think it's worth checking, so that we catch those internal errors early
> on, so a WARN_ON is probably the right thing to do.

Added a WARN_ON <0

> > > > +	mutex_unlock(&pf_vdev->vf_token->lock);
> > > > +
> > > > +	vfio_device_put(pf_dev);
> > > > +}
> > > > +
> > > >  static void vfio_pci_release(void *device_data)
> > > >  {
> > > >  	struct vfio_pci_device *vdev = device_data;
> > > > @@ -475,6 +504,7 @@ static void vfio_pci_release(void *device_data)
> > > >  	if (!(--vdev->refcnt)) {
> > > >  		vfio_spapr_pci_eeh_release(vdev->pdev);
> > > >  		vfio_pci_disable(vdev);
> > > > +		vfio_pci_vf_token_user_add(vdev, -1);
> > > >  	}
> > > >  
> > > >  	mutex_unlock(&vdev->reflck->lock);
> > > > @@ -493,6 +523,7 @@ static int vfio_pci_open(void *device_data)
> > > >  	mutex_lock(&vdev->reflck->lock);
> > > >  
> > > >  	if (!vdev->refcnt) {
> > > > +		vfio_pci_vf_token_user_add(vdev, 1);
> > > >  		ret = vfio_pci_enable(vdev);
> > > >  		if (ret)
> > > >  			goto error;    
> > 
> > I think we want to include decrementing token users in the error path
> > here.  
> 
> Yes; good that my comment made you spot it, because I didn't notice :)

Fixed, I opted to move this increment until after the potential failure
as a PF bound to vfio-pci will disable SR-IOV on remove, so if we're a
VF we effectively block the PF from getting removed anyway and there's
no hurry to bump the user count first.


> > > > @@ -1278,11 +1309,86 @@ static void vfio_pci_request(void *device_data, unsigned int count)
> > > >  	mutex_unlock(&vdev->igate);
> > > >  }
> > > >  
> > > > +#define VF_TOKEN_ARG "vf_token="
> > > > +
> > > > +/* Called with vdev->vf_token->lock */
> > > > +static int vfio_pci_vf_token_match(struct vfio_pci_device *vdev, char *opts)
> > > > +{
> > > > +	char *token;
> > > > +	uuid_t uuid;
> > > > +	int ret;
> > > > +
> > > > +	if (!opts)
> > > > +		return -EINVAL;
> > > > +
> > > > +	token = strstr(opts, VF_TOKEN_ARG);
> > > > +	if (!token)
> > > > +		return -EINVAL;
> > > > +
> > > > +	token += strlen(VF_TOKEN_ARG);
> > > > +
> > > > +	ret = uuid_parse(token, &uuid);
> > > > +	if (ret)
> > > > +		return ret;
> > > > +
> > > > +	if (!uuid_equal(&uuid, &vdev->vf_token->uuid))
> > > > +		return -EACCES;
> > > > +
> > > > +	return 0;  
> 
> Again, I guess my objections below are a matter of taste; especially
> because this function does the key=value parsing, and I'm not sure it's
> the right place to do so.

Ok, I've moved the parsing into vfio_pci_match().  The vf_token
validation gets quite a bit hairy by trying to error in cases where the
token is provided but not used though.

> > > > +}
> > > > +
> > > >  static int vfio_pci_match(void *device_data, char *buf)
> > > >  {
> > > >  	struct vfio_pci_device *vdev = device_data;
> > > > +	char *opts;
> > > > +
> > > > +	opts = strchr(buf, ' ');
> > > > +	if (opts) {
> > > > +		*opts = 0;
> > > > +		opts++;
> > > > +	}
> > > > +
> > > > +	if (strcmp(pci_name(vdev->pdev), buf))
> > > > +		return 0; /* No match */      
> > > 
> > > Up to here, this function is fine; but below, it gets a bit hard to
> > > follow...
> > >     
> > > > +
> > > > +	if (vdev->pdev->is_virtfn) {
> > > > +		struct pci_dev *physfn = pci_physfn(vdev->pdev);
> > > > +		struct vfio_device *pf_dev;
> > > > +		int ret = 0;
> > > > +
> > > > +		pf_dev = vfio_device_get_from_dev(&physfn->dev);
> > > > +		if (pf_dev) {
> > > > +			if (pci_dev_driver(physfn) == &vfio_pci_driver) {
> > > > +				struct vfio_pci_device *pf_vdev =
> > > > +						vfio_device_data(pf_dev);
> > > > +
> > > > +				mutex_lock(&pf_vdev->vf_token->lock);
> > > > +				ret = vfio_pci_vf_token_match(pf_vdev, opts);
> > > > +				mutex_unlock(&pf_vdev->vf_token->lock);
> > > > +			}
> > > > +
> > > > +			vfio_device_put(pf_dev);
> > > > +
> > > > +			if (ret)
> > > > +				return -EACCES;
> > > > +		}
> > > > +	}      
> > > 
> > > If we are a VF, and the PF is bound to vfio, pass whatever stuff other
> > > than the device name that was passed in to an opaque match function.    
> > 
> > vfio_pci_match() is an opaque match function relative to vfio.c, but
> > there's nothing opaque here.  We have a VF where the associated PF is
> > bound to vfio-pci, therefore we require that the additional options
> > include a vf_token matching the PF and we go looking to verify that.
> >    
> > > > -	return !strcmp(pci_name(vdev->pdev), buf);
> > > > +	if (vdev->vf_token) {
> > > > +		int ret = 0;
> > > > +
> > > > +		mutex_lock(&vdev->vf_token->lock);
> > > > +
> > > > +		if (vdev->vf_token->users)
> > > > +			ret = vfio_pci_vf_token_match(vdev, opts);
> > > > +
> > > > +		mutex_unlock(&vdev->vf_token->lock);
> > > > +
> > > > +		if (ret)
> > > > +			return -EACCES;
> > > > +	}      
> > > 
> > > If we have a VF token with users, pass whatever stuff other than the
> > > device name that was passed in to an opaque match function.    
> > 
> > This description strays further off course a bit.  If we have a
> > vf_token then we are a PF and clearly bound to vfio-pci.  If there are
> > existing VF users then we require the user to provide a vf_token
> > matching the one currently on the device.  
> 
> Maybe my wording is just a bit off...
> 
> >   
> > > What about the following instead:
> > > 
> > > - parse the passed-in string into device name and key/value pairs
> > > - maybe reject anything with an unknown key    
> > 
> > This is definitely something that we should decided whether or not we
> > want to do it.  I think an argument for it is that a user can pick
> > arbitrary key=value options that would be ignored with this
> > implementation, but later might match a key that gets defined and then
> > we break them.  Misuse of the API on the part of the user, but maybe
> > better to just prevent it ahead of time.  
> 
> Yes, it's probably good to do this now.

Added.

> > > - check the device name
> > > - if we're a VF with the PF bound to vfio, require a VF token to be
> > >   specified and pass it to a token match function
> > > - if we have a VF token with users, require a VF token to be specified
> > >   and pass it to a token match function    
> > 
> > This is essentially what we do above.  Maybe we just disagree about
> > whether we're calling an "opaque match function" versus a "token match
> > function".  
> 
> Maybe I should have said "function parsing a string, which might
> contain a lot of unrelated stuff" vs "function explicitly handling a
> vf_token value".

Next version will pass a pre-parsed uuid pointer to the vf_token
validation function.

> > > My main gripes with the current code are:
> > > - key=value parsing is done in the match function for vf_token
> > > - it looks hard to extend the list of supported key/value pairs
> > > - I don't see a good way to find out (as the user) _why_ the VF isn't
> > >   matching    
> > 
> > If we want to reject unknown options, then yes, the parsing should be
> > done ahead.  I don't see that it's hard to extend though, each new
> > requirement can follow the same methodology to check for it in the
> > remaining options string.  
> 
> If you pre-parse into option/value pairs, you see quite easily if you
> managed to obtain a required option, if an option has been specified
> more than once, or if an unknown option has been specified. If a new
> option is introduced, you just need to handle whatever has been parsed
> already. Extending is probably not exactly hard, but pre-parsing likely
> makes it easier, as you don't have implicit assumptions.

I hope you'll like the next version ;)

> > The last point is the one I brought up in the cover letter and where
> > I'm also not happy with the opaque error condition, but I have no
> > thoughts on how to resolve it.  Either we block the user from getting
> > the device file descriptor, and they're left scratching their heads
> > why, or we give them access to the file descriptor AND we need to
> > impose barriers to access mechanisms (ex. block read/write/mmap, limit
> > ioctls) AND we need to use VFIO_DEVICE_FEATURE and VFIO_DEVICE_GET_INFO
> > as a mechanism for the user to figure out that the device requires
> > "something" to get full access.  With the latter, I'm concerned whether
> > existing userspace code will fail in predictable ways and that it
> > snowballs into an ugly API.  For instance, if we add a flag to device
> > info to indicate it's locked, existing code won't know about that flag,
> > so we have to cripple device info to report no regions and no irqs to
> > make that code fail.  Then a user needs to know which feature to probe
> > for to figure out how the device is locked, then once they do we make
> > device info report real values?  It's maybe a little more deterministic
> > than blocking access to the file descriptor, but I'm not sure it's
> > worth it.  We could do a log-once if the match fails for token, but we
> > need to be careful not to provide an obvious point where the user could
> > spam the logs.  I've also considered if we could write an error back
> > into the user's buffer, but the ioctl isn't designed that way and we
> > don't know if we'd break how the user consumes that buffer later.  
> 
> Some extended reporting mechanism is likely to become unwieldy,
> especially when we realize we missed something. A simple log message
> that a vf_token is required (pointing to a more verbose description, if
> possible) looks best (obviously rate limited or only printed once).
> Just enough to give the user a hint so that they are not left
> completely baffled.

Using pci_info_ratelimited() for now.  I'm curious your opinion on the
above snowball effect of rejecting unknown/duplicate options turning
into rejecting unused options as well, and how that plays into whether
we really need the DEVICE_FEATURE ioctl.  It might be too abstract
until I send out a new version.  Thanks for the comments,

Alex




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux