From: Daniel Drake <drake@xxxxxxxxxxxx> [ Upstream commit 3030df209aa8cf831b9963829bd9f94900ee8032 ] On Asus UX434DA (AMD Ryzen7 3700U) and Asus X512DK (AMD Ryzen5 3500U), the XHCI controller fails to resume from runtime suspend or s2idle, and USB becomes unusable from that point. xhci_hcd 0000:03:00.4: Refused to change power state, currently in D3 xhci_hcd 0000:03:00.4: enabling device (0000 -> 0002) xhci_hcd 0000:03:00.4: WARN: xHC restore state timeout xhci_hcd 0000:03:00.4: PCI post-resume error -110! xhci_hcd 0000:03:00.4: HC died; cleaning up During suspend, a transition to D3cold is attempted, however the affected platforms do not seem to cut the power to the PCI device when in this state, so the device stays in D3hot. Upon resume, the D3hot-to-D0 transition is successful only if the D3 delay is increased to 20ms. The transition failure does not appear to be detectable as a CRS condition. Add a PCI quirk to increase the delay on the affected hardware. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205587 Link: http://lkml.kernel.org/r/CAD8Lp47Vh69gQjROYG69=waJgL7hs1PwnLonL9+27S_TcRhixA@xxxxxxxxxxxxxx Link: https://lore.kernel.org/r/20191127053836.31624-2-drake@xxxxxxxxxxxx Signed-off-by: Daniel Drake <drake@xxxxxxxxxxxx> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/pci/quirks.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 27008edce1a24..c0b7aa4dc0f51 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1889,6 +1889,22 @@ static void quirk_radeon_pm(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm); +/* + * Ryzen5/7 XHCI controllers fail upon resume from runtime suspend or s2idle. + * https://bugzilla.kernel.org/show_bug.cgi?id=205587 + * + * The kernel attempts to transition these devices to D3cold, but that seems + * to be ineffective on the platforms in question; the PCI device appears to + * remain on in D3hot state. The D3hot-to-D0 transition then requires an + * extended delay in order to succeed. + */ +static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev) +{ + quirk_d3hot_delay(dev, 20); +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot); + #ifdef CONFIG_X86_IO_APIC static int dmi_disable_ioapicreroute(const struct dmi_system_id *d) { -- 2.20.1
