On Wed, Feb 12, 2020 at 1:46 AM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > > On Tue, Feb 11, 2020 at 10:02:13PM +0530, Muni Sekhar wrote: > > On Tue, Feb 11, 2020 at 8:10 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > > > On Tue, Feb 11, 2020 at 07:36:00PM +0530, Muni Sekhar wrote: > > > > On Tue, Feb 11, 2020 at 3:58 AM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > > > > > On Sun, Feb 09, 2020 at 07:59:41AM +0530, Muni Sekhar wrote: > > > > > > Hi all, > > > > > > > > > > > > After rebooting the system following messages are seen in dmesg. > > > > > > Not sure if these indicate a problem. Can some one look at these and > > > > > > confirm if this is problem or can be ignored ? > > > > > > > > > > > > Also any suggestions as to what would cause this? > > > > > > > > > > > > [ 1.084728] pci 0000:00:1c.0: BAR 15: no space for [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.084813] pci 0000:00:1c.0: BAR 15: failed to assign [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.084890] pci 0000:00:1c.2: BAR 14: no space for [mem size 0x00200000] > > > > > > [ 1.084949] pci 0000:00:1c.2: BAR 14: failed to assign [mem size 0x00200000] > > > > > > [ 1.085037] pci 0000:00:1c.2: BAR 15: no space for [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.085108] pci 0000:00:1c.2: BAR 15: failed to assign [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.085199] pci 0000:00:1c.3: BAR 15: no space for [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.085270] pci 0000:00:1c.3: BAR 15: failed to assign [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.085343] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] > > > > > > [ 1.085403] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff] > > > > > > [ 1.085470] pci 0000:00:1c.3: BAR 15: no space for [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.085540] pci 0000:00:1c.3: BAR 15: failed to assign [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.085613] pci 0000:00:1c.2: BAR 14: no space for [mem size 0x00200000] > > > > > > [ 1.085672] pci 0000:00:1c.2: BAR 14: failed to assign [mem size 0x00200000] > > > > > > [ 1.085738] pci 0000:00:1c.2: BAR 15: no space for [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.085808] pci 0000:00:1c.2: BAR 15: failed to assign [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.085884] pci 0000:00:1c.0: BAR 15: no space for [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.085954] pci 0000:00:1c.0: BAR 15: failed to assign [mem size > > > > > > 0x00200000 64bit pref] > > > > > > [ 1.086026] pci 0000:00:1c.0: PCI bridge to [bus 01] > > > > > > [ 1.086083] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] > > > > > > [ 1.086144] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd07fffff] > > > > > > > > > > The "no space" and "failed to assign" messages are all for bridge > > > > > windows (13 is the I/O window, 14 is the MMIO window, 15 is the MMIO > > > > > pref window). I can't tell if you have any devices below these > > > > > bridges (lspci would show them). If you don't have any devices below > > > > > these bridges, you can ignore the messages. > > > > > > > > I have the devices below these bridges. FPGA endpoint is connected to > > > > '00:1c.0 PCI bridge' and Ethernet controller is connected to '00:1c.3 > > > > PCI bridge'. > > > > Does these messages impact the functionality of the connected devices? > > > > > > Yes. We tried to allocate 0x00200000 of prefetchable MMIO to 00:1c.0 > > > for use by the FPGA endpoint. But this failed, so there is no > > > prefetchable MMIO available for the FPGA. The 0xd0400000-0xd07fffff > > > non-prefetachable MMIO space *is* available for it. > > > > > > Similarly, we were unable to allocate 0x00200000 of prefetchable MMIO > > > for the 00:1c.3 bridge for use by the ethernet controller. I don't > > > know what non-prefetchable MMIO space was allocated or what the NIC > > > needs. > > > > > > "lspci -v" will show you what the FPGA and the NIC need. > > > > > > > If so what kind of impact and is there any solution for this? > > > > > > > Also, I'd like to know why "no space" and "failed to assign" > > > > messages displayed? > > > > > > These messages mean we tried to allocate space for the bridges but we > > > unable to do so. This is because either the host bridge didn't have > > > big enough apertures (on x86, these usually come from ACPI _CRS > > > methods), or there's a bug in the Linux allocation algorithms. > > > > > > I can't tell anything more without seeing the complete dmesg log, > > > which contains the host bridge aperture information and the BAR sizes > > > of the FPGA and NIC. > > Thank you for the clarification. dmesg log is attached. > > If PCI bridge aperture is small, What is the most sensible way to proceed? > > Here's the relevant info from your dmesg log: > > PCI host bridge to bus 0000:00 > pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] > pci_bus 0000:00: root bus resource [mem 0xc0000000-0xd0c18ffe window] > pci_bus 0000:00: root bus resource [bus 00-ff] > pci 0000:00:1c.0: PCI bridge to [bus 01] > pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd07fffff] > pci 0000:01:00.0: [1556:5555] type 00 class 0x050000 # FPGA > pci 0000:01:00.0: reg 0x10: [mem 0xd0400000-0xd07fffff] > pci 0000:00:1c.3: PCI bridge to [bus 03] > pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff] > pci 0000:00:1c.3: bridge window [mem 0xd0a00000-0xd0bfffff] > pci 0000:03:00.0: [8086:1533] type 00 class 0x020000 # I210 NIC > pci 0000:03:00.0: reg 0x10: [mem 0xd0a00000-0xd0afffff] > pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd01f] > pci 0000:03:00.0: reg 0x1c: [mem 0xd0b00000-0xd0b03fff] > > The FPGA at 01:00.0 has one non-prefetchable memory BAR and is > assigned [mem 0xd0400000-0xd07fffff]. That range is inside the host > bridge aperture ([mem 0xc0000000-0xd0c18ffe window]) and is routed > through the 00:1c.0 bridge (bridge window [mem 0xd0400000-0xd07fffff]). > So the FPGA resources are fine. > > The fact that Linux tried and failed to allocate prefetchable memory > space for the bridge is immaterial because the FPGA can't use > prefetchable memory anyway. > > The NIC at 03:00.0 is similar: it has two non-prefetchable memory BARs > and one I/O BAR. They're all assigned valid space, and the fact that > Linux tried and failed to allocate prefetchable memory space for the > bridge makes no difference because the NIC can't use it. > > So these messages do not indicate a problem. Maybe there's something > we can do to make this more clear to the user. Thank you for the detailed explanation. > > Bjorn -- Thanks, Sekhar
