On Fri, Jan 03, 2020 at 06:14:02PM +0530, Vidya Sagar wrote:
> Add support for the endpoint mode of Synopsys DesignWare core based
> dual mode PCIe controllers present in Tegra194 SoC.
>
> Signed-off-by: Vidya Sagar <vidyas@xxxxxxxxxx>
> ---
> V2:
> * Addressed Bjorn's review comments
> * Made changes as part of addressing review comments for other patches
>
> drivers/pci/controller/dwc/Kconfig | 30 +-
> drivers/pci/controller/dwc/pcie-tegra194.c | 782 ++++++++++++++++++++-
> 2 files changed, 796 insertions(+), 16 deletions(-)
>
[...]
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index cbe95f0ea0ca..6621ac79efee 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
[...]
> @@ -1427,8 +1620,553 @@ static int tegra_pcie_config_rp(struct tegra_pcie_dw *pcie)
[...]
> +static int tegra_pcie_config_ep(struct tegra_pcie_dw *pcie,
> + struct platform_device *pdev)
> +{
[...]
> + ret = devm_request_irq(dev, pcie->pex_rst_irq,
> + tegra_pcie_ep_pex_rst_irq,
> + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
> + name, (void *)pcie);
> + if (ret < 0) {
> + dev_err(dev, "Failed to request IRQ for PERST: %d\n", ret);
> + return ret;
> + }
> + disable_irq(pcie->pex_rst_irq);
I just came across this while reviewing another patch: it looks like a
better way to handle "disabled by default" interrupts is to do this:
irq_set_status_flags(rtc->irq, IRQ_NOAUTOEN);
before calling devm_request_irq(). See here for an example:
http://patchwork.ozlabs.org/patch/1217944/
Thierry
Attachment:
signature.asc
Description: PGP signature
