From: Ray Jui <ray.jui@xxxxxxxxxxxx>
Update the iProc PCIe binding document for better modeling of the legacy
interrupt (INTx) support
Signed-off-by: Ray Jui <ray.jui@xxxxxxxxxxxx>
Signed-off-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
---
.../devicetree/bindings/pci/brcm,iproc-pcie.txt | 48 ++++++++++++++++++----
1 file changed, 41 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
index df065aa..d3f833a 100644
--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
@@ -13,9 +13,6 @@ controller, used in Stingray
PAXB-based root complex is used for external endpoint devices. PAXC-based
root complex is connected to emulated endpoint devices internal to the ASIC
- reg: base address and length of the PCIe controller I/O register space
-- #interrupt-cells: set to <1>
-- interrupt-map-mask and interrupt-map, standard PCI properties to define the
- mapping of the PCIe interface to interrupt numbers
- linux,pci-domain: PCI domain ID. Should be unique for each host controller
- bus-range: PCI bus numbers covered
- #address-cells: set to <3>
@@ -41,6 +38,21 @@ Required:
- brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal
address used by the iProc PCIe core (not the PCIe address)
+Legacy interrupt (INTx) support (optional):
+
+Note INTx is for PAXB only.
+- interrupt-map-mask and interrupt-map, standard PCI properties to define
+the mapping of the PCIe interface to interrupt numbers
+
+In addition, a sub-node that describes the legacy interrupt controller built
+into the PCIe controller.
+This sub-node must have the following properties:
+ - compatible: must be "brcm,iproc-intc"
+ - interrupt-controller: claims itself as an interrupt controller for INTx
+ - #interrupt-cells: set to <1>
+ - interrupts: interrupt line wired to the generic GIC for INTx support
+ - interrupt-parent: Phandle to the parent interrupt controller
+
MSI support (optional):
For older platforms without MSI integrated in the GIC, iProc PCIe core provides
@@ -77,8 +89,11 @@ Example:
reg = <0x18012000 0x1000>;
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+ <0 0 0 2 &pcie0_intc 1>,
+ <0 0 0 3 &pcie0_intc 2>,
+ <0 0 0 4 &pcie0_intc 3>;
linux,pci-domain = <0>;
@@ -98,6 +113,14 @@ Example:
msi-parent = <&msi0>;
+ pcie0_intc: interrupt-controller {
+ compatible = "brcm,iproc-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
+ };
+
/* iProc event queue based MSI */
msi0: msi@18012000 {
compatible = "brcm,iproc-msi";
@@ -115,8 +138,11 @@ Example:
reg = <0x18013000 0x1000>;
#interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+ <0 0 0 2 &pcie1_intc 1>,
+ <0 0 0 3 &pcie1_intc 2>,
+ <0 0 0 4 &pcie1_intc 3>;
linux,pci-domain = <1>;
@@ -130,4 +156,12 @@ Example:
phys = <&phy 1 6>;
phy-names = "pcie-phy";
+
+ pcie1_intc: interrupt-controller {
+ compatible = "brcm,iproc-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_NONE>;
+ };
};
--
2.7.4
