Query: PCIe Interrupt handler support with ACPI

[Wasim Khan <wasim.khan@xxxxxxx>]

Hi,

I am working on adding ACPI support for our PCIe controller. Our controller is not ECAM compliant so I had to implement 
MCFG Quick for our own config read/write/map/init function. After this device enumeration is working fine.

Next I am trying to make the legacy interrupt work with our controller with ACPI. 
With device tree , we enable interrupts using below routine during driver probe and we register our interrupt handler(ls_pcie_g4_handler).

static int ls_pcie_g4_interrupt_init(struct mobiveil_pcie *mv_pci)
{
       struct ls_pcie_g4 *pcie = to_ls_pcie_g4(mv_pci);
       u32 val;
       int ret;

       pcie->irq = platform_get_irq_byname(mv_pci->pdev, "intr");
       if (pcie->irq < 0) {
              dev_err(&mv_pci->pdev->dev, "Can't get 'intr' irq.\n");
              return pcie->irq;
       }
       ret = devm_request_irq(&mv_pci->pdev->dev, pcie->irq,
                            ls_pcie_g4_handler, IRQF_SHARED,
                            mv_pci->pdev->name, pcie);
       if (ret) {
              dev_err(&mv_pci->pdev->dev, "Can't register PCIe IRQ.\n");
              return  ret;
       }

       /* Enable interrupts */
       val = PAB_INTP_INTX_MASK | PAB_INTP_MSI | PAB_INTP_RESET |
             PAB_INTP_PCIE_UE | PAB_INTP_IE_PMREDI | PAB_INTP_IE_EC;
       csr_writel(mv_pci, val, PAB_INTP_AMBA_MISC_ENB);

       return 0;
}

Can someone help me how can I add similar support (register our interrupt handler) with ACPI  and how to get the pcie->irq  ?
I am using below ACPI table for my host bridge in firmware (UEFI).
=========
Scope(_SB)
{
  // PCIe Root bus
  Device (PCI0)
  {
    Name (_HID, "PNP0A08") // PCI Express Root Bridge
    Name (_CID, "PNP0A03") // Compatible PCI Root Bridge
    Name(_SEG, 0) // Segment of this Root complex
    Name(_BBN, 0) // Base Bus Number
    Name(_CCA, 1) // Cache Coherency Attribute
    Method (_CRS, 0, Serialized) { // Root complex resources
      Name (RBUF, ResourceTemplate () {
        WordBusNumber ( // Bus numbers assigned to this root
          ResourceProducer, MinFixed, MaxFixed, PosDecode,
          0,                           // AddressGranularity
          LX2160A_PCI_SEG_BUSNUM_MIN,  // AddressMinimum - Minimum Bus Number
          LX2160A_PCI_SEG_BUSNUM_MAX,  // AddressMaximum - Maximum Bus Number
          0,                           // AddressTranslation
          LX2160A_PCI_SEG_BUSNUM_RANGE // RangeLength - # of Busses
        )
        QWordMemory ( // 64-bit BAR Windows
          ResourceProducer,
          PosDecode,
          MinFixed,
          MaxFixed,
          NonCacheable,
          ReadWrite,
          0x0,                           // Granularity
          LX2160A_PCI_SEG0_MMIO64_MIN,   // Min Base Address
          LX2160A_PCI_SEG0_MMIO64_MAX,   // Max Base Address
          LX2160A_PCI_SEG0_MMIO64_XLATE, // Translate
          LX2160A_PCI_SEG0_MMIO64_SIZE   // Length
        )
      })
      Return (RBUF)
    }

    Device (RES0)
    {
      Name (_HID, "NXP0016") // NXP PCIe RC config base address
      Name (_CRS, ResourceTemplate (){
        Memory32Fixed (ReadWrite, LX2160A_PCI_SEG0_RC_CONFIG_BASE,
                       LX2160A_PCI_SEG0_RC_CONFIG_SIZE)
      })
    }

    // PCI Routing Table
    Name (_PRT, Package () {
            Package () { 0xFFFF, 0, Zero, LX2160A_PCI_SEG0_INTA },   // INTA
            Package () { 0xFFFF, 1, Zero, LX2160A_PCI_SEG0_INTB },   // INTB
            Package () { 0xFFFF, 2, Zero, LX2160A_PCI_SEG0_INTC },   // INTC
            Package () { 0xFFFF, 3, Zero, LX2160A_PCI_SEG0_INTD },   // INTD
            })
    //
    // OS Control Handoff
    //
    Name (SUPP, Zero) // PCI _OSC Support Field value
    Name (CTRL, Zero) // PCI _OSC Control Field value

    Method(_OSC,4)
    {
        // Check for proper UUID
        If (LEqual (Arg0, ToUUID ("33DB4D5B-1FF7-401C-9657-7441C03DD766")))
        {
            // Create DWord-adressable fields from the Capabilities Buffer
            CreateDWordField (Arg3, 0, CDW1)
            CreateDWordField (Arg3, 4, CDW2)
            CreateDWordField (Arg3, 8, CDW3)

            // Save Capabilities DWord2 & 3
            Store (CDW2, SUPP)
            Store (CDW3, CTRL)

            // Disable PCIe and SHPC hotplug, AER and PME
            // And (CTRL, 0x10, CTRL)

            // Capabilities bits were masked
            Or (CDW1, 0x10, CDW1)

            // Update DWORD3 in the buffer
            Store (CTRL, CDW3)
            Return (Arg3)
       } Else {
            Or (CDW1, 4, CDW1) // Unrecognized UUID
                Return (Arg3)
       }
    } // End _OSC
  } // Device(PCI0)

  Device (RES0)
  {
    Name (_HID, "NXP0016") // NXP PCIe RC config base address
    Name (_CID, "PNP0C02") // Motherboard reserved resource
    Name (_UID, 0x0)  //  Unique ID
    Name (_CRS, ResourceTemplate (){
      Memory32Fixed (ReadWrite, LX2160A_PCI_SEG0_RC_CONFIG_BASE,
              LX2160A_PCI_SEG0_RC_CONFIG_SIZE)
    })
  }

  Device (RESP)  //reserve for ecam resource
  {
     Name (_HID, "PNP0C02")
     Name (_CRS, ResourceTemplate (){
       QwordMemory ( //ECAM space for [bus 00-ff]
         ResourceConsumer,
         PosDecode,
         MinFixed,
         MaxFixed,
         NonCacheable,
         ReadWrite,
         0x0,                               // Granularity
         LX2160A_PCI_SEG0_CONFIG_BASE,      // Min Base Address
         LX2160A_PCI_SEG0_CONFIG_BASE_MAX,  // Max Base Address
         0x0,                               // Translate
         LX2160A_PCI_SEG0_CONFIG_SIZE       // Length
       )
     })
  }
}
==================

Regards,
Wasim