On Tue, Nov 12, 2019 at 04:59:21PM +0100, Nicolas Saenz Julienne wrote: > From: Jim Quinlan <james.quinlan@xxxxxxxxxxxx> > > The DT bindings description of the brcmstb PCIe device is described. > This node can only be used for now on the Raspberry Pi 4. > > Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx> > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> > > --- > > Changes since v1: > - Fix commit Subject > - Remove linux,pci-domain > > This was based on Jim's original submission[1], converted to yaml and > adapted to the RPi4 case. > > [1] https://patchwork.kernel.org/patch/10605937/ > > .../bindings/pci/brcm,stb-pcie.yaml | 110 ++++++++++++++++++ > 1 file changed, 110 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > new file mode 100644 > index 000000000000..4cbb18821300 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml > @@ -0,0 +1,110 @@ > +# SPDX-License-Identifier: GPL-2.0 I think in the last revision Rob asked you to change the license to the following: # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) Thanks, Andrew Murray > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Brcmstb PCIe Host Controller Device Tree Bindings > + > +maintainers: > + - Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx> > + > +properties: > + compatible: > + const: brcm,bcm2711-pcie # The Raspberry Pi 4 > + > + reg: > + maxItems: 1 > + > + interrupts: > + minItems: 1 > + maxItems: 2 > + items: > + - description: PCIe host controller > + - description: builtin MSI controller > + > + interrupt-names: > + minItems: 1 > + maxItems: 2 > + items: > + - const: pcie > + - const: msi > + > + "#address-cells": > + const: 3 > + > + "#size-cells": > + const: 2 > + > + "#interrupt-cells": > + const: 1 > + > + interrupt-map-mask: true > + > + interrupt-map: true > + > + ranges: true > + > + dma-ranges: true > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: sw_pcie > + > + msi-controller: > + description: Identifies the node as an MSI controller. > + type: boolean > + > + msi-parent: > + description: MSI controller the device is capable of using. > + $ref: /schemas/types.yaml#/definitions/phandle > + > + brcm,enable-ssc: > + description: Indicates usage of spread-spectrum clocking. > + type: boolean > + > +required: > + - compatible > + - reg > + - "#address-cells" > + - "#size-cells" > + - "#interrupt-cells" > + - interrupt-map-mask > + - interrupt-map > + - ranges > + - dma-ranges > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + > + scb { > + #address-cells = <2>; > + #size-cells = <1>; > + pcie0: pcie@7d500000 { > + compatible = "brcm,bcm2711-pcie"; > + reg = <0x0 0x7d500000 0x9310>; > + #address-cells = <3>; > + #size-cells = <2>; > + #interrupt-cells = <1>; > + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "pcie", "msi"; > + interrupt-map-mask = <0x0 0x0 0x0 0x7>; > + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH > + 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH > + 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH > + 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; > + msi-parent = <&pcie0>; > + msi-controller; > + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; > + dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>; > + brcm,enable-ssc; > + }; > + }; > -- > 2.24.0 >
