On Tue, Nov 12, 2019 at 2:41 PM Peter Geis <pgwipeout@xxxxxxxxx> wrote: > > On Tue, Nov 12, 2019 at 2:15 PM Robin Murphy <robin.murphy@xxxxxxx> wrote: > > > > On 12/11/2019 3:55 pm, Peter Geis wrote: > > > On Mon, Nov 11, 2019 at 9:29 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > > >> > > >> On Mon, Nov 11, 2019 at 07:30:15PM -0500, Peter Geis wrote: > > >>> On Mon, Nov 11, 2019 at 7:13 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote: > > >>>> On Mon, Nov 04, 2019 at 01:55:40PM -0500, Peter Geis wrote: > > >>>>> Good Morning, > > >>>>> > > >>>>> I'm attempting to debug an issue with the rockpro64 pcie port. > > >>>>> It would appear that the port does not like various cards, including > > >>>>> cards of the same make that randomly work or do not work, such as > > >>>>> Intel i340 based NICs. > > >>>>> I'm experiencing it with a GTX645 gpu. > > >>>>> > > >>>>> This seems to be a long running issue, referenced both at [0], and [1]. > > >>>>> There was an attempt to rectify it, by adding a delay between training > > >>>>> and probing [2], but that doesn't seem to be the issue here. > > >>>>> It appears that when we probe further into the card, such as devfn > > > >>>>> 1, we trigger the bug. > > >>>>> I've added a print statement that prints the devfn, address, and size > > >>>>> information, which you can see below. > > >>>>> > > >>>>> I've attempted setting the available number of lanes to 1 as well, to > > >>>>> no difference. > > >>>>> > > >>>>> If anyone could point me in the right direction as to where to > > >>>>> continue debugging, I'd greatly appreciate it. > > >>>>> > > >>>>> [0] https://github.com/ayufan-rock64/linux-build/issues/254 > > >>>>> [1] https://github.com/rockchip-linux/kernel/issues/116 > > >>>>> [2] https://github.com/ayufan-rock64/linux-kernel/commit/3cde5c624c9c39aa03251a55c2d26a48b5bdca5b > > >>>>> > > >>>>> [ 198.491458] rockchip-pcie f8000000.pcie: missing legacy phy; search > > >>>>> for per-lane PHY > > >>>>> [ 198.492986] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found > > >>>>> [ 198.493060] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found > > >>>>> [ 198.550444] rockchip-pcie f8000000.pcie: current link width is x1 > > >>>>> [ 198.550458] rockchip-pcie f8000000.pcie: idling lane 1 > > >>>>> [ 198.550479] rockchip-pcie f8000000.pcie: idling lane 2 > > >>>>> [ 198.550490] rockchip-pcie f8000000.pcie: idling lane 3 > > >>>>> [ 198.550608] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: > > >>>>> [ 198.550625] rockchip-pcie f8000000.pcie: Parsing ranges property... > > >>>>> [ 198.550656] rockchip-pcie f8000000.pcie: MEM > > >>>>> 0xfa000000..0xfbdfffff -> 0xfa000000 > > >>>>> [ 198.550676] rockchip-pcie f8000000.pcie: IO > > >>>>> 0xfbe00000..0xfbefffff -> 0xfbe00000 > > >>>>> [ 198.552908] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00 > > >>>>> [ 198.552933] pci_bus 0000:00: root bus resource [bus 00-1f] > > >>>>> [ 198.552943] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff] > > >>>>> [ 198.552954] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] > > >>>>> (bus address [0xfbe00000-0xfbefffff]) > > >>>>> [ 198.552965] pci_bus 0000:00: scanning bus > > >>>>> [ 198.554198] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400 > > >>>>> [ 198.555508] pci 0000:00:00.0: supports D1 > > >>>>> [ 198.555516] pci 0000:00:00.0: PME# supported from D0 D1 D3hot > > >>>>> [ 198.556023] pci 0000:00:00.0: PME# disabled > > >>>>> [ 198.561245] pci_bus 0000:00: fixups for bus > > >>>>> [ 198.561269] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0 > > >>>>> [ 198.561277] pci 0000:00:00.0: bridge configuration invalid ([bus > > >>>>> 00-00]), reconfiguring > > >>>>> [ 198.566429] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1 > > >>>>> [ 198.567008] pci_bus 0000:01: scanning bus > > >>>>> [ 198.567171] pci 0000:01:00.0: [10de:11c4] type 00 class 0x030000 > > >>>>> [ 198.567420] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00ffffff] > > >>>>> [ 198.567515] pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x07ffffff > > >>>>> 64bit pref] > > >>>>> [ 198.567608] pci 0000:01:00.0: reg 0x1c: [mem 0x00000000-0x01ffffff > > >>>>> 64bit pref] > > >>>>> [ 198.567665] pci 0000:01:00.0: reg 0x24: initial BAR value 0x00000000 invalid > > >>>>> [ 198.567673] pci 0000:01:00.0: reg 0x24: [io size 0x0080] > > >>>>> [ 198.567730] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] > > >>>>> [ 198.567815] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256) > > >>>>> [ 198.569051] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, > > >>>>> limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 126.016 Gb/s > > >>>>> with 8 GT/s x16 link) > > >>>>> [ 198.570225] pci 0000:01:00.0: vgaarb: VGA device added: > > >>>>> decodes=io+mem,owns=none,locks=none > > >>>>> [ 198.570481] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300 > > >>>>> [ 198.570663] pci 0000:01:00.1: reg 0x10: [mem 0x00000000-0x00003fff] > > >>>>> [ 198.571039] pci 0000:01:00.1: Max Payload Size set to 256 (was 128, max 256) > > >>>>> <snip> > > >>>>> [ 198.749857] pci_bus 0000:01: read pcie, devfn 1, at 100, size 2 > > >>>>> [ 198.750252] pci_bus 0000:01: read pcie, devfn 2, at 0, size 4 > > >>>>> [ 198.750881] Internal error: synchronous external abort: 96000210 > > >>>>> [#1] PREEMPT SMP > > >>>> > > >>>> Is there really supposed to be a device at 01:00.2? > > >>>> > > >>>> Maybe this is just the PCIe Unsupported Request error that we expect > > >>>> to get when trying to read config space of a device that doesn't > > >>>> exist. > > >>>> > > >>>> On "most" platforms, we just get ~0 data back when that happens, but > > >>>> I'm not sure that's always the case on arm64. I think it depends on > > >>>> how the PCIe host bridge is designed, and there might be some CPU > > >>>> configuration, too. > > >>> > > >>> Yes, this is a GTX645 video card. > > >>> Nvidia cards usually have two to three devices, > > >>> The GPU proper, the audio device for the hdmi output, and the i2c controller. > > >>> > > >>> I do think that this driver is missing sanity checking on the > > >>> addressing, since the BRCM driver for the RPI4 doesn't try to > > >>> enumerate a video card, since it checks if the MMIO space is large > > >>> enough to fit the BAR before assigning the addresses. See [3]. Also in > > >>> that thread he was able to increase the address space provided to the > > >>> BRCM driver and fix the issue, but I don't see how we could do that on > > >>> the rk3399. > > >>> > > >>> pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x07ffffff 64bit pref] is > > >>> 128 MB, which already exceeds our address space. > > >>> I think the driver is just overflowing the address space. > > >> > > >> If we don't have enough space to assign all the device BARs, I think a > > >> driver will still be able to claim the device, but when the driver > > >> calls pci_enable_device(), it should fail. Lack of address space > > >> should not cause a PCIe error. > > >> > > >> But in this case, none of that matters because we're still enumerating > > >> devices in pci_scan_root_bus_bridge(). We haven't gotten to the point > > >> of trying to bind drivers to devices, so the driver isn't involved at > > >> all yet. > > > For clarification, the driver I'm referring to is the rk3399-pcie host driver. > > >> > > >> The backtrace says we're trying to read the Vendor ID of a device, and > > >> your debug output suggests we're trying to enumerate 01:00.2. If you > > >> put that card in another system, you could find out how many functions > > >> it has. > > >> > > >> Or if you swapped this with other cards where you know the number of > > >> functions, you could see if the external abort always happens when > > >> probing for the first unimplemented function. > > > This card definitely has more than one function. > > > > FWIW, random lspci logs I grovelled up off the internet show cards with > > the same IDs only implementing functions 0 and 1, which does suggest > > that maybe function 2 really doesn't exist but the card handles > > unsupported config requests in a way that this particular bridge/root > > port doesn't quite deal with properly. > > Thanks! Is there a sane way we could make the kernel handle this in > place of the controller? > (It's apparently based on the designware ip, but it doesn't use their > driver for some reason) > > > > > > Before my original message I hacked in some code to make the driver > > > return 0xff when devfn > 1, and the scan passed, but as soon as > > > nouveau attempted to access the device, the entire kernel exploded. This is what happens when probing is prevented from reading above devfn 1, and nouveau gets a shot. [ 76.658128] SError Interrupt on CPU4, code 0xbf000000 -- SError [ 76.658129] CPU: 4 PID: 1752 Comm: systemd-udevd Not tainted 5.4.0-rc5-next-20191031-00001-gddbfb17ac1c4-dirty #16 [ 76.658130] Hardware name: Pine64 RockPro64 (DT) [ 76.658131] pstate: 60400005 (nZCv daif +PAN -UAO) [ 76.658131] pc : nvkm_device_ctor+0x2cc/0x2e18 [nouveau] [ 76.658132] lr : nvkm_device_ctor+0x2c0/0x2e18 [nouveau] [ 76.658133] sp : ffff800012daf740 [ 76.658134] x29: ffff800012daf740 x28: ffff0000c2db9800 [ 76.658136] x27: 0000000000000000 x26: ffff0000c7f2e0b0 [ 76.658138] x25: 0000000000000000 x24: 0000000000000000 [ 76.658139] x23: 0000000000000000 x22: ffff800009e1b1e0 [ 76.658141] x21: ffff0000c335b940 x20: ffff800009ede660 [ 76.658142] x19: 0000000000000000 x18: 0000000000000001 [ 76.658144] x17: 0000000000000000 x16: 0000000000000000 [ 76.658145] x15: ffff0000c335bdc0 x14: ffff8000140a0000 [ 76.658147] x13: 0000000000110000 x12: 0040000000000001 [ 76.658148] x11: ffff0000c12b8180 x10: 0000000000000085 [ 76.658150] x9 : ffff800013c00000 x8 : 0000000000110000 [ 76.658152] x7 : 0000000000000000 x6 : ffff0000f7ff0008 [ 76.658153] x5 : ffff800013d0ffff x4 : ffff800013c00000 [ 76.658154] x3 : ffff800013c00004 x2 : 0140000000000000 [ 76.658156] x1 : 0000000000000000 x0 : ffff800013c00000 [ 76.658158] Kernel panic - not syncing: Asynchronous SError Interrupt [ 76.658159] CPU: 4 PID: 1752 Comm: systemd-udevd Not tainted 5.4.0-rc5-next-20191031-00001-gddbfb17ac1c4-dirty #16 [ 76.658160] Hardware name: Pine64 RockPro64 (DT) [ 76.658161] Call trace: [ 76.658161] dump_backtrace+0x0/0x148 [ 76.658162] show_stack+0x24/0x30 [ 76.658163] dump_stack+0xa8/0xf0 [ 76.658163] panic+0x160/0x36c [ 76.658164] nmi_panic+0x94/0x98 [ 76.658164] arm64_serror_panic+0x84/0x90 [ 76.658165] do_serror+0x88/0x140 [ 76.658166] el1_error+0xc4/0x170 [ 76.658166] nvkm_device_ctor+0x2cc/0x2e18 [nouveau] [ 76.658167] nvkm_device_pci_new+0xf8/0x2c8 [nouveau] [ 76.658168] nouveau_drm_probe+0x60/0x288 [nouveau] [ 76.658168] local_pci_probe+0x44/0x98 [ 76.658169] pci_device_probe+0x118/0x1b0 [ 76.658170] really_probe+0xe0/0x320 [ 76.658171] driver_probe_device+0x5c/0xf0 [ 76.658171] device_driver_attach+0x74/0x80 [ 76.658172] __driver_attach+0x64/0xe0 [ 76.658173] bus_for_each_dev+0x80/0xd0 [ 76.658173] driver_attach+0x30/0x40 [ 76.658174] bus_add_driver+0x14c/0x1f0 [ 76.658175] driver_register+0x64/0x110 [ 76.658175] __pci_register_driver+0x58/0x68 [ 76.658176] nouveau_drm_init+0x17c/0x10000 [nouveau] [ 76.658177] do_one_initcall+0x50/0x298 [ 76.658178] do_init_module+0x88/0x270 [ 76.658178] load_module+0x2068/0x2600 [ 76.658179] __do_sys_finit_module+0xd0/0xe8 [ 76.658180] __arm64_sys_finit_module+0x28/0x38 [ 76.658180] el0_svc_common.constprop.0+0x7c/0x1f0 [ 76.658181] el0_svc_handler+0x34/0xa0 [ 76.658182] el0_svc+0x14/0x40 [ 76.658182] el0_sync_handler+0x118/0x280 [ 76.658183] el0_sync+0x164/0x180 [ 76.658248] SMP: stopping secondary CPUs [ 76.658249] Kernel Offset: disabled [ 76.658250] CPU features: 0x10002,2000600c [ 76.658250] Memory Limit: none > > > > > > Another reason I believe the address assignments are overflowing and > > > corrupting other address assignments is after the external abort, the > > > entire PCIE controller is inaccessible. > > > $ lspci > > > pcilib: Cannot open /sys/bus/pci/devices/0000:01:00.1/config > > > lspci: Unable to read the standard configuration space header of > > > device 0000:01:00.1 > > > pcilib: Cannot open /sys/bus/pci/devices/0000:00:00.0/config > > > lspci: Unable to read the standard configuration space header of > > > device 0000:00:00.0 > > > pcilib: Cannot open /sys/bus/pci/devices/0000:01:00.0/config > > > lspci: Unable to read the standard configuration space header of > > > device 0000:01:00.0 > > > > > > Attempting to rescan the bus or any other pci function results in a > > > hung kernel task. > > > > You crashed deep in the kernel part-way through the driver's probe > > routine; don't expect any partly-initialised bits of that driver to > > actually work. I bet you also can't load/unload modules and do various > > other things either, because the thread will almost certainly have been > > holding a bunch of locks, too. It's not worth trying to reason about the > > state of anything after that kind of unexpected crash ;) > > That is observed, but I think it is actually more destructive than that. > Attempting to do an access after the fact, then performing a soft > reset results in a spectacular crash when it tries to bring the BIG > cluster online. > > [ 0.203160] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] > [ 5.355606] CPU4: failed to come online > [ 5.363258] CPU4: failed in unknown state : 0x0 > Unhandled Exception in EL3. > x30 = 0xUhandled Exception in L3. > x30 = UNhandled ExcEption in EL3. > x30 = 0xUnhandled Excepti2n in EL_. > x30 = 0xUnhandled Exception in EL3. > x30 = lxUnhadled Exception in EL3. > x30 = 0xUnhandled Excepion in EL3. > x30 = 0xUnhandled Exception in EL3. > x30 = 0xUnhandled Eception in EL3. > x30 = 0xUnhandled Exception in EL3. > x30 = 0xUnhandled Exception in EL3.x30 = > 0xUnhandled Exception in EL3. > x30 = 0xUnhandled Excepton i2 EL3. > x30 = 0xUnhandUnhandled Exceptionein EL3.lx30 = > 0xUnhandled Exception in EL3. > x30 = 0xUnhandled Unhanded Exception in EL3. > x30 = 0xUnhandled Exceptin in EL3Unhandled Exception inEL3. > x0 = 0xUnhandled Exception in EL3. > x30 = 0xUnhandled Exception in EL3. > x30 = 0xUnhandled Exception in EL. > x30 = 0xUnhandled Exception in EL3. > x30 = 0xUnhandled Exception in EL3. > x30 = 0xUnhandled xception in EL3 > x30 = 0xUnhcndled Exception in EL3. > x30= 0xUnhandled Excextion in EL3. > x30 = 0xUnhandled Exception in EL3. > x30 = 0x[ 10.484411] CPU5: failed to come online > [ 10.484807] CPU5: failed in unknown state : 0x0 > [ 10.485374] smp: Brought up 1 node, 4 CPUs > > It goes on until it tries to do it's first DMA setup, then just hangs. > > > > >> If the Root Port (00:00.0) supports AER, you could also dump out the > > >> status registers from the AER capability and figure out whether it > > >> logged a PCIe error. This would be sort of like what > > >> aer_process_err_devices() does. A bit of a hassle to do this by hand > > >> in the exception path, but could be enlightening, just as a debug > > >> tool. > > > > > > Is there a way to handle external synchronous aborts in a device driver? > > > > Not easily on arm64 - the closest thing we have is some arch-internal > > machinery for undefined instruction hooks. You'd have to hack something > > gruesome into do_sea()... > > > > For starters it might be worth enabling all the debug prints in > > rockchip-pcie to see if there's any error IRQ corresponding to the > > aborted access. > > Debug prints are already enabled, I had to hack in the print to show > what addresses it was crashing on. > > Your explanation was the last piece for me to understand how this all > works, thanks! > > > > Robin. > > > > > If so, I'll definitely look into plugging in the aer status functions. > > > > > >> > > >>> [3] https://twitter.com/domipheus/status/1167586160077627393 > > >>>> > > >>>>> [ 198.751581] Modules linked in: drm_panel_orientation_quirks > > >>>>> pcie_rockchip_host(+) cpufreq_dt sch_fq_codel ip_tables x_tables ipv6 > > >>>>> crc_ccitt nf_defrag_ipv6 > > >>>>> [ 198.752861] CPU: 1 PID: 1686 Comm: systemd-udevd Not tainted > > >>>>> 5.4.0-rc5-next-20191031-00001-gddbfb17ac1c4-dirty #5 > > >>>>> [ 198.753791] Hardware name: Pine64 RockPro64 (DT) > > >>>>> [ 198.754215] pstate: 60400085 (nZCv daIf +PAN -UAO) > > >>>>> [ 198.754672] pc : __raw_readl+0x0/0x8 [pcie_rockchip_host] > > >>>>> [ 198.755172] lr : rockchip_pcie_rd_conf+0x140/0x1dc [pcie_rockchip_host] > > >>>>> [ 198.755773] sp : ffff8000132af530 > > >>>>> [ 198.756079] x29: ffff8000132af530 x28: 0000000000000000 > > >>>>> [ 198.756565] x27: 0000000000000001 x26: 0000000000000000 > > >>>>> [ 198.757049] x25: ffff0000c20ac000 x24: 0000000000002000 > > >>>>> [ 198.757534] x23: ffff0000c20ae5c0 x22: ffff8000132af5d4 > > >>>>> [ 198.758018] x21: 0000000000002000 x20: 0000000000000004 > > >>>>> [ 198.758502] x19: 0000000000102000 x18: 0000000000000001 > > >>>>> [ 198.758987] x17: 0000000000000000 x16: 0000000000000000 > > >>>>> [ 198.759472] x15: ffffffffffffffff x14: ffff80001159bcc8 > > >>>>> [ 198.759957] x13: 0000000000000000 x12: ffff800011b2c000 > > >>>>> [ 198.760441] x11: ffff8000115bf000 x10: ffff800011310018 > > >>>>> [ 198.760926] x9 : 00000000fffb9fff x8 : 0000000000000001 > > >>>>> [ 198.761410] x7 : 0000000000000000 x6 : ffff0000f7492548 > > >>>>> [ 198.761894] x5 : 0000000000000001 x4 : ffff0000f7492548 > > >>>>> [ 198.762379] x3 : 0000000000000000 x2 : 0000000000c00008 > > >>>>> [ 198.762863] x1 : ffff80001dc00008 x0 : ffff80001a102000 > > >>>>> [ 198.763348] Call trace: > > >>>>> [ 198.763583] __raw_readl+0x0/0x8 [pcie_rockchip_host] > > >>>>> [ 198.764057] pci_bus_read_config_dword+0x88/0xd0 > > >>>>> [ 198.764484] pci_bus_generic_read_dev_vendor_id+0x40/0x1b8 > > >>>>> [ 198.764982] pci_bus_read_dev_vendor_id+0x58/0x88 > > >>>>> [ 198.765413] pci_scan_single_device+0x84/0xf8 > > >>>>> [ 198.765812] pci_scan_slot+0x7c/0x120 > > >>>>> [ 198.766149] pci_scan_child_bus_extend+0x68/0x2dc > > >>>>> [ 198.766579] pci_scan_bridge_extend+0x350/0x588 > > >>>>> [ 198.766992] pci_scan_child_bus_extend+0x21c/0x2dc > > >>>>> [ 198.767430] pci_scan_child_bus+0x24/0x30 > > >>>>> [ 198.767797] pci_scan_root_bus_bridge+0xc4/0xd0 > > >>>>> [ 198.768215] rockchip_pcie_probe+0x610/0x74c [pcie_rockchip_host] > > >>>>> [ 198.768770] platform_drv_probe+0x58/0xa8 > > >>>>> [ 198.769139] really_probe+0xe0/0x318 > > >>>>> [ 198.769468] driver_probe_device+0x5c/0xf0 > > >>>>> [ 198.769844] device_driver_attach+0x74/0x80 > > >>>>> [ 198.770227] __driver_attach+0x64/0xe8 > > >>>>> [ 198.770572] bus_for_each_dev+0x84/0xd8 > > >>>>> [ 198.770924] driver_attach+0x30/0x40 > > >>>>> [ 198.771253] bus_add_driver+0x188/0x1e8 > > >>>>> [ 198.771605] driver_register+0x64/0x110 > > >>>>> [ 198.771956] __platform_driver_register+0x54/0x60 > > >>>>> [ 198.772388] rockchip_pcie_driver_init+0x28/0x10000 [pcie_rockchip_host] > > >>>>> [ 198.772998] do_one_initcall+0x94/0x390 > > >>>>> [ 198.773353] do_init_module+0x88/0x268 > > >>>>> [ 198.773697] load_module+0x1e18/0x2198 > > >>>>> [ 198.774043] __do_sys_finit_module+0xd0/0xe8 > > >>>>> [ 198.774435] __arm64_sys_finit_module+0x28/0x38 > > >>>>> [ 198.774858] el0_svc_common.constprop.3+0xa4/0x1d8 > > >>>>> [ 198.775297] el0_svc_handler+0x34/0xa0 > > >>>>> [ 198.775645] el0_svc+0x14/0x40 > > >>>>> [ 198.775928] el0_sync_handler+0x118/0x290 > > >>>>> [ 198.776295] el0_sync+0x164/0x180 > > >>>>> [ 198.776609] Code: bad PC value > > >>>>> [ 198.776897] ---[ end trace 88fc77651b5e2909 ]--- > > > > > > _______________________________________________ > > > Linux-rockchip mailing list > > > Linux-rockchip@xxxxxxxxxxxxxxxxxxx > > > http://lists.infradead.org/mailman/listinfo/linux-rockchip > > >
